Overclock.net › Forums › Intel › Intel CPUs › Try Try Again 930 4.2 Quest for a stable OC
New Posts  All Forums:Forum Nav:

Try Try Again 930 4.2 Quest for a stable OC - Page 3

post #21 of 56
Thread Starter 
Quote:
Originally Posted by manolith View Post
the vcore is pretty high.. you need to check out the pll voltage and you might need to give the ram a slight bump..
do you mean bump my Pll from 1.86 to 1.88?

what exactly does pll control?

bump the voltage on the ram im assuming?

BIG QUESTION!

my ram is rated at 9-9-9-24-2n 1600 mhz @ 1.5v

is it dangerous for my ram to be at 1.6 or higher since on the packaging it says 1.5?
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #22 of 56
Quote:
Originally Posted by waedoe View Post
actually, about the voltage. 1.388 to me isnt that bad its roughly .03v over intel spec (correct me if im wrong!). Of course its not the amazing dream chip but considering H/T is on and some people post thier voltages with ht off but dont explain that then claim thier chips are at 4.5 at like 1.3v but no ht it can get confusing. Im pleased, i bought mega to go to 4 ghz and now i have 4.2ghz on mega at safe temps now if i could only build another computer and oc it, i might start tightening my ram down. i think ill have to raise the ram voltage though from 1.6 to 1.66
i dont know man but i dont think that many people in this forums lie about their overclocks.. and that vcore is high for your clock.. but like you said.. you might not have the best chip.
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
post #23 of 56
Quote:
Originally Posted by waedoe View Post
the sizes are the same just look at the numbers in the left column


I'll just be over here..
Bueller
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K 4.7Ghz @ 1.36v Asus Sabertooth Z77 Gigabyte Windforce 780 Ti 3GB 16GB Corsair Vengeance 1866 9-10-9-27 
Hard DriveOptical DriveCoolingOS
256GB Samsung 840 Pro + RAID1 2TB 7200 Hitachis LG 6X Blu-ray Burner Corsair H100i Windows 7 x64 
MonitorKeyboardPowerCase
Asus VG236HE XArmor U9BL-S Enermax Galaxy Evo 1250W Corsair 600T 
MouseMouse PadAudio
Logitech G500 SteelSeries 5L O2DAC -> Corsair SP2500 (or O2 amp and Beyerdyn... 
  hide details  
Reply
Bueller
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770K 4.7Ghz @ 1.36v Asus Sabertooth Z77 Gigabyte Windforce 780 Ti 3GB 16GB Corsair Vengeance 1866 9-10-9-27 
Hard DriveOptical DriveCoolingOS
256GB Samsung 840 Pro + RAID1 2TB 7200 Hitachis LG 6X Blu-ray Burner Corsair H100i Windows 7 x64 
MonitorKeyboardPowerCase
Asus VG236HE XArmor U9BL-S Enermax Galaxy Evo 1250W Corsair 600T 
MouseMouse PadAudio
Logitech G500 SteelSeries 5L O2DAC -> Corsair SP2500 (or O2 amp and Beyerdyn... 
  hide details  
Reply
post #24 of 56
Thread Starter 
Quote:
Originally Posted by manolith View Post
i dont know man but i dont think that many people in this forums lie about their overclocks.. and that vcore is high for your clock.. but like you said.. you might not have the best chip.
I didnt mean to infer that people lie, but i didnt know which voltage to post for the longest time, id say its more a matter of confusion than malicious lying. and yes it is higher than most, but all in all i cant change the minimum requirements of this chip, if there is something else you think my help me lower my vcore let me know! id love to be able to lower it a few notches. BSOD gives me head aches now though!
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #25 of 56
Quote:
Originally Posted by waedoe View Post
I didnt mean to infer that people lie, but i didnt know which voltage to post for the longest time, id say its more a matter of confusion than malicious lying. and yes it is higher than most, but all in all i cant change the minimum requirements of this chip, if there is something else you think my help me lower my vcore let me know! id love to be able to lower it a few notches. BSOD gives me head aches now though!
raise cpu-pll to 1.88. It may help u lower some of ur other voltages. cuz i found out when i was playing around with my volts that if i dropped my cpu-pll from 1.88 to 1.86 i was unstable, so it may help a bit :]
post #26 of 56
Thread Starter 
Quote:
Originally Posted by kpopsaranghae View Post
raise cpu-pll to 1.88. It may help u lower some of ur other voltages. cuz i found out when i was playing around with my volts that if i dropped my cpu-pll from 1.88 to 1.86 i was unstable, so it may help a bit :]
ah i didnt know that, any one know what pll is for? im assuming since you said cpu-pll its related to the cpu in some way
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #27 of 56
Quote:
Originally Posted by waedoe View Post
I didnt mean to infer that people lie, but i didnt know which voltage to post for the longest time, id say its more a matter of confusion than malicious lying. and yes it is higher than most, but all in all i cant change the minimum requirements of this chip, if there is something else you think my help me lower my vcore let me know! id love to be able to lower it a few notches. BSOD gives me head aches now though!
i build a p6t for a friend and needed a pll of 1.90+ to get my vcore under control.
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
post #28 of 56
Thread Starter 
Quote:
Originally Posted by manolith View Post
i build a p6t for a friend and needed a pll of 1.90+ to get my vcore under control.
is it dangerous to go over 1.88?
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
post #29 of 56
Quote:
Originally Posted by waedoe View Post
is it dangerous to go over 1.88?
no. you will be fine, bump the ram to 1.70v it might help even tho the ram clock is not very high. you can bring it back down later to maybe 1.66 1.68
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 920 @ 4.2ghz X58 SLI Classified EVGA 1080ti @2012/5858 18GB Corsair/Patriot 12800 Tri-ch @ 2013mhz 
Hard DriveHard DriveOptical DriveCooling
OCZ ARC100 240gb  2TB 7200rpm WD cheap DVD Swiftech Apogee XT. Swiftech MCP 655 Pump and ... 
OSMonitorKeyboardPower
win 10 64bit XB280HK razer black widow ultimate Corsair 850W 
CaseMouseMouse PadAudio
HAF932-AMD Logitech G9x razer corsair vengeance 1500 
Other
Thrustmasters T500rs, Fanatec CSR elite pedals ... 
  hide details  
Reply
post #30 of 56
Thread Starter 
Quote:
Originally Posted by manolith View Post
no. you will be fine, bump the ram to 1.70v it might help even tho the ram clock is not very high. you can bring it back down later to maybe 1.66 1.68
**** RAM OVER 1.65 instant burn, yeah ill try that i was having alot of memory errors mainly it was memory or QPI but my QPI is already at 1.36
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
ROFLCOPTER
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 2600k @ 4.3GHZ Gigabyte GA-Z68XP-UD4 EVGA 580 GTX 1.5GB EVGA 580 GTX 1.5GB 
RAMHard DriveOptical DriveCooling
G.Skill 12 Gig 9-9-9-24-2N 1600 128 Crucial M4 SSD + Samsung 1TB 7200 RPM Asus DVD/RW H100 CPU, H80 X2 GFX Card 
OSMonitorKeyboardPower
Windows 7 64bit Pro HP ZR30W IPS 30 inch I-Rocks kr6260 Antec 1200 Gold PSU 
CaseMouseMouse PadAudio
Antec 300 Logitech Preformance MX Generic Creative Titanium HD 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Try Try Again 930 4.2 Quest for a stable OC