Overclock.net › Forums › Intel › Intel Motherboards › Rampage III Extreme POST/Boot Issues
New Posts  All Forums:Forum Nav:

Rampage III Extreme POST/Boot Issues - Page 2

post #11 of 13
Quote:
Originally Posted by xxbassplayerxx View Post
Is there a BIOS template for this somewhere? I'd prefer not to type everything out.

EDIT: Found one... Updating with settings.

Code:
Target CPU Frequency                  4200MHz
Target DRAM Frequency                 1603MHz

LN2 Mode                              []***
QPI Loadline Calibration              []***

Sync Mode                             [Enabled]
AI Overclock Tuner                    [Manual]
OC From CPU level Up                  [Auto]
CPU Ratio Setting                     [21.0]
CPU Turbo Power Limit                 [Disabled]

>CPU Configuration----------------------------
CPU Ratio Setting                     [21.0]
C1E Support                           [Disabled]
Hardware Prefetcher                   [Enabled]
Adjacent Cache Line Prefetcher        [Enabled]
Intel(R) Virtualization Tech          [Enabled]
CPU TM Function                       [Enabled]
Execute Disable Bit                   [Enabled]
Intel(R) HT Technology                [Enabled]
Active Processor Cores                [All]
A20M                                  [Disabled]
Intel(R) SpeedStep(TM) Tech           [Disabled]
Intel(R) C-STATE Tech                 [Disabled]
C State package limit setting         []
----------------------------------------------

BCLK Frequency                        [200]
PCIE Frequency                        [105]
DRAM Frequency                        [DDR3-1603MHz]
UCLK Frequency                        [3408MHz]
QPI Link Data Rate                    [7217MT/s]

Memory Configuration Protect          [Disabled]

>DRAM Timing Control--------------------------
CAS# Latency                          [7 DRAM Clock]
RAS# to CAS# Delay                    [7 DRAM Clock]
RAS# PRE Time                         [7 DRAM Clock]
RAS# ACT Time                         [21 DRAM Clock]
RAS# to RAS# Delay                    [Auto]
REF Cycle Time                        [Auto]
WRITE Recovery Time                   [Auto]
READ to PRE Time                      [Auto]
FOUR ACT WIN Time                     [Auto]
Back-To-BackCAS# Delay                [Auto]

Timing Mode                           [1N]
Round Trip Latency on CHA             [Auto]
Round Trip Latency on CHB             [Auto]
Round Trip Latency on CHC             [Auto]

WRITE To READ Delay(DD)               [Auto]
WRITE To READ Delay(DR)               [Auto]
WRITE To READ Delay(SR)               [Auto]
READ To WRITE Delay(DD)               [Auto]
READ To WRITE Delay(DR)               [Auto]
READ To WRITE Delay(SR)               [Auto]
READ To READ Delay(DD)                [Auto]
READ To READ Delay(DR)                [Auto]
READ To READ Delay(SR)                [Auto]
WRITE To WRITE Delay(DD)              [Auto]
WRITE To WRITE Delay(DR)              [Auto]
WRITE To WRITE Delay(SR)              [Auto]
----------------------------------------------

CPU Differential Amplitude            [Auto]
CPU Clock Skew                        [Auto]
IOH Clock Skew                        [Auto]
------------ Extreme Engine Digi+ ------------
Digi+ PWR Mode                        [X-Power]
PWR Volt. Control                     [Auto]
Load-Line Calibration                 [50% Calibration]
CPU Voltege OCP                       [Enabled]
CPU PWM Frequency                     [Auto]

Extreme OV                            [Disabled]
Extreme OC                            [Auto]

CPU Voltage                           [1.45000]
CPU PLL Voltage                       [1.90800]
QPI/DRAM Core Voltage                 [1.38125]
DRAM Bus Voltage                      [1.70925]

>DRAM REF Voltages----------------------------
DRAM DATA REF Voltage on CHA          [Auto]
DRAM CTRL REF Voltage on CHA          [Auto]
DRAM DATA REF Voltage on CHB          [Auto]
DRAM CTRL REF Voltage on CHB          [Auto]
DRAM DATA REF Voltage on CHC          [Auto]
DRAM CTRL REF Voltage on CHC          [Auto]
----------------------------------------------

IOH Voltage                           [1.24550]
IOH PCIE Voltage                      [1.51050]

ICH Voltage                           [1.24550]
ICH PCIE Voltage                      [1.51050]

---------- Spread Spectrum Control -----------
CPU Spread Spectrum                   [Auto]
DRAM Spread Spectrum                  [Auto]



***on-board jumper dependant
So this is the settings youre trying to boot up with? Or is this your current OC which will boot up fine?

Try leaving your PCIE Frequency at 100
     
CPUMotherboardGraphicsRAM
i7 980X 3003B475* @ 4449.1MHz 1.45V (6C-12T) ASUS Rampage III Extreme - 1208 BIOS CrossFire Asus EAH6970 945MHz/1450MHz 1180 mV* 6GB Corsair Dominator GT 2009MHz / 7-8-7-20 T1 C7* 
Hard DriveOSMonitorKeyboard
RAID 0* OCZ Vertex 3 120GBX2 (OS)+ 4X 2TB WD Green Windows 7 Ultimate 64Bit 30" NEC MultiSync PA301W Filco Majestouch-2 Cherry MX Red 
PowerCaseMouseMouse Pad
Corsair AX1200 1200W 80 Plus Gold 100% Modular Corsair Obsidian 800D Razor Mamba 4G Steelseries SX 
Audio
Bowers & Wilkins PM1 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-2620M Apple Intel® HD Graphics 3000 Corsair Memory 8GB DDR3 1333MHz 
Hard DriveOptical DriveOS
Western Digital Scorpio Blue (WD10JPVT) 1TB SuperDrive OSX Lion 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
i7 980X 3003B475* @ 4449.1MHz 1.45V (6C-12T) ASUS Rampage III Extreme - 1208 BIOS CrossFire Asus EAH6970 945MHz/1450MHz 1180 mV* 6GB Corsair Dominator GT 2009MHz / 7-8-7-20 T1 C7* 
Hard DriveOSMonitorKeyboard
RAID 0* OCZ Vertex 3 120GBX2 (OS)+ 4X 2TB WD Green Windows 7 Ultimate 64Bit 30" NEC MultiSync PA301W Filco Majestouch-2 Cherry MX Red 
PowerCaseMouseMouse Pad
Corsair AX1200 1200W 80 Plus Gold 100% Modular Corsair Obsidian 800D Razor Mamba 4G Steelseries SX 
Audio
Bowers & Wilkins PM1 
CPUMotherboardGraphicsRAM
Intel® Core™ i7-2620M Apple Intel® HD Graphics 3000 Corsair Memory 8GB DDR3 1333MHz 
Hard DriveOptical DriveOS
Western Digital Scorpio Blue (WD10JPVT) 1TB SuperDrive OSX Lion 
  hide details  
Reply
post #12 of 13
Thread Starter 
Switching the card again allowed that one to boot...

I'm trying to push past the 225 wall that I had on my UD4P and I was at 224, but I forgot to raise the QPI voltage

Will update to see if I have this all figured out...


EDIT:

Nope... I can boot with a config but if I change anything in the BIOS, I have to do a hard reset (turn board off, clear CMOS, turn PSU off, turn PSU on, turn board on, change settings, repeat).
Bench Stuffs
(32 items)
 
ITX Daily Driver
(11 items)
 
For Sale: 6GHz+ 980X
$225 (USD) or best offer
CPUCPUCPUCPU
Intel Core i7 920 Intel Xeon W3520 Intel Core i7 4770K Intel Core 2 Duo E8500 
CPUCPUCPUCPU
Intel Pentium G3258 Intel QX9650 AMD FX 4300 Intel E2140 
CPUMotherboardGraphicsGraphics
E4300 Asus Rampage Extreme / P5E3 Deluxe / Gigabyte X... MSI GTX 275 Lightning MSI HD 7970 Lightning 
GraphicsGraphicsGraphicsGraphics
Asus GTX 285 Matrix Platinum MSI HD 5870 Lightning EVGA GTX 980 TI Classified K|ngp|n Edition MSI GTX 580 Lightning 
RAMRAMRAMRAM
Corsair Dominator Platinum 2666 10-12-12 Samsung Corsair Dominator GT 2000 7-8-7 Hypers Kingston HyperX 2000 9-9-9 BBSE G.Skill Trident 2000 9-9-9 PSC 
Hard DriveHard DriveHard DriveCooling
Kingston SSD Now! 128GB Patriot Torqx 2 32GB Seagate 80GB XPSC Rasa + EK VGA + HWLabs Black Ice GTX 360 +... 
OSOSOSKeyboard
W7 Pro x64 SP1 Windows XP x86 SP3 W8.1 Ducky Shine 3, Cherry Brown Switches 
PowerCaseMouseMouse Pad
Corsair AX1200 Dimastech Easy V2.5! <3 Logitech G5 Battlefield 2142 Edition Puretrak Stealth 
  hide details  
Reply
Bench Stuffs
(32 items)
 
ITX Daily Driver
(11 items)
 
For Sale: 6GHz+ 980X
$225 (USD) or best offer
CPUCPUCPUCPU
Intel Core i7 920 Intel Xeon W3520 Intel Core i7 4770K Intel Core 2 Duo E8500 
CPUCPUCPUCPU
Intel Pentium G3258 Intel QX9650 AMD FX 4300 Intel E2140 
CPUMotherboardGraphicsGraphics
E4300 Asus Rampage Extreme / P5E3 Deluxe / Gigabyte X... MSI GTX 275 Lightning MSI HD 7970 Lightning 
GraphicsGraphicsGraphicsGraphics
Asus GTX 285 Matrix Platinum MSI HD 5870 Lightning EVGA GTX 980 TI Classified K|ngp|n Edition MSI GTX 580 Lightning 
RAMRAMRAMRAM
Corsair Dominator Platinum 2666 10-12-12 Samsung Corsair Dominator GT 2000 7-8-7 Hypers Kingston HyperX 2000 9-9-9 BBSE G.Skill Trident 2000 9-9-9 PSC 
Hard DriveHard DriveHard DriveCooling
Kingston SSD Now! 128GB Patriot Torqx 2 32GB Seagate 80GB XPSC Rasa + EK VGA + HWLabs Black Ice GTX 360 +... 
OSOSOSKeyboard
W7 Pro x64 SP1 Windows XP x86 SP3 W8.1 Ducky Shine 3, Cherry Brown Switches 
PowerCaseMouseMouse Pad
Corsair AX1200 Dimastech Easy V2.5! <3 Logitech G5 Battlefield 2142 Edition Puretrak Stealth 
  hide details  
Reply
post #13 of 13
man you guys are lucky! My rampage III extreme doesn't even finish the POST!
I have this boot problem where it get's stuck on "initializing USB controllers . . Done." and there is absolutely nothing I can do about it. Many people seem to have this problem. Has it occured to anyone before?
When the system hangs the Q LED stops at "Boot Device". It recognizes the processor, the VGA and the RAM but I just can't get into the BIOS.
A bazillion CMOS resets didn't really help either.
I have to RMA this thing ASAP. Too bad
I hope this never happens to anyone of you, it's really a shame.
HexaStation
(13 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 980x Asus Rampage III Extreme (2 RMA) ATI Radeon HD 5870 Eyefinity 6 6x2 GB DDR3 Mushkin Redline 1600 MHz 6-8-6-24-1t 
Hard DriveOptical DriveOSMonitor
600 GB WD VelociRaptor Samsung SH-S223L Windows 7 Ultimate x64 cheap LG :( 
PowerCaseMouse
Enermax Revolution85+ 1250 W Chieftec Mesh CA-01 Logitech Wireless M505 
  hide details  
Reply
HexaStation
(13 items)
 
  
CPUMotherboardGraphicsRAM
intel i7 980x Asus Rampage III Extreme (2 RMA) ATI Radeon HD 5870 Eyefinity 6 6x2 GB DDR3 Mushkin Redline 1600 MHz 6-8-6-24-1t 
Hard DriveOptical DriveOSMonitor
600 GB WD VelociRaptor Samsung SH-S223L Windows 7 Ultimate x64 cheap LG :( 
PowerCaseMouse
Enermax Revolution85+ 1250 W Chieftec Mesh CA-01 Logitech Wireless M505 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Rampage III Extreme POST/Boot Issues