Originally Posted by lsdmeasap
How was temps, better this time?
That seems like a lot of vcore for the speeds you are running, you sure it was needed?
If you have an IDE drive that would be better to use, forgot to mention before, as would XP
What PCIE are you using?
Temps bottomed out at -9C at the base of the pot. I didn't really have enough dice to keep it going. When that happened, the micture in the pot was at -55C.
Yes I'm sure the Vcore is needed. This really is the worst D0 known to man. It needs almost 1.4V for 4.0! It blue screens at anything less than that.
I don't have an IDE drive right now. I'll see if I can get an almost dead one from work.
I was using XP earlier, but my times weren't as good. This 7 install only has 16 processes running. The XP only has 14, but it doesn't seem to score better.
This was at 114MHz on the PCI bus.
I have a new chip arriving Tuesday, so hopefully I can get some better scores with that. I actually hit 232 BCLK but the chip keeled over. Next time I get some dice I'll try a BCLK run and turn down the multi.