Well its in and running. Unfortunately i have buggered something up with the electronics, my motherboard powers on and stays on but there is a high pitched squeel(maybe a capacitor?) and the mobo gives a wierd sequence of beeps instead of the normal single beep.
But i will fix it later, ONTO THE PICTURES!!!
My whole case is ALOT cleaner now that i got rid of the T junction and the fill tube that was sitting almost right in the middle of the case, i also did a bit of cable managment (not that it shows
The top most barb is a fill line, then bottom one goes to the pump inlet and the middle one comes from the radiator.
This is with the pump running, the water doesn't make a sound whilst running.
With the pump turned off.
The reservoir took a while to fill but once it was filled the loop bled of air in about 30 seconds.