Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Need Help OC i7-930 to 4.1GHz
New Posts  All Forums:Forum Nav:

Need Help OC i7-930 to 4.1GHz

post #1 of 5
Thread Starter 
Hi guys!

I would need help stabilize my setup and also, recommendations about the Bios settings, what to enable and not... Board is ASUS P6T (standard, not deluxe).

You would be realy kind to indicate what features to turn on or off and what voltage to increase/decrease...!

Here is my current setup, OCCT 30 minutes then BSOD stop: 0x0000007D

i7 930 @ 4.11Ghz sur Asus P6T (HT ON)
** Ai Tweaker **4100 MHz
Ai Overclock TunerMANUEL
CPU Clock Ratio21
Intel Speedstep TechDISABLED
BCLK Frequency195
PCIE Frequency100
DRAM Frequency1560
UCLK Frequency3510
QPI Link Data Rate7020 MT/S

Load-Line CalibrationENABLED
CPU Differential AmplitudeAUTO
CPU Clock SkewAUTO
CPU Spread SpectrumDISABLED
IOH Clock SkewAUTO
PCIE Spread SpectrumDISABLED

** Voltage **
CPU Voltage1.3125
CPU PLL Voltage1.88
QPI/DRAM Core Voltage1.3625
IOH Voltage1.20
IOH PCIE Voltage1.50
ICH Voltage1.10
ICH PCIE Voltage1.50
DRAM BUS Voltage1.66v
ALL DRAM REF Voltage set to AUTO

** Advanced - CPU Configuration **
CPU Ratio Setting21
C1E SupportDISABLED
Hardware PrefetcherDISABLED
Adjacent Cache Line PrefetchDISABLED
Intel Virtualization TechDISABLED
CPU TM Function (Turbo Mode)DISABLED
Execute Disable BitDISABLED
Intel HT Technology (Hyperthread)ENABLED
Active Processor CoresALL
A20MDISABLED
Intel SpeedStep TechDISABLED
Intel C-State TechDISABLED

** Power **
ACPI 2.0 SupportDISABLED
ACPI APIC SupportENABLED

** DRAM Timing Control **
CAS Latency8
RAS# To CAS Delay8
RAS# PRE TIME8
RAS# ACT TIME24
Everything else in RAM set to AUTO
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
post #2 of 5
Have you tried raising your vCore at all?
post #3 of 5
Thread Starter 
Thats what ill do now...

Other settings are ok u think?

Quote:
Originally Posted by Moltar View Post
Have you tried raising your vCore at all?
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
post #4 of 5
Everything looks good. You could also try to raise your VTT a notch and see if that helps with stability.
post #5 of 5
Thread Starter 
Thank you! I'll try that and post the results!

Quote:
Originally Posted by Moltar View Post
Everything looks good. You could also try to raise your VTT a notch and see if that helps with stability.
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7-930 Asus P6T (not deluxe) Asus EAH5770 Kinston ValueRam HyperX 6Gb DDR3-1333 
Hard DriveOptical DriveOSMonitor
WD Black Edition 1Tb PIONEER DVR-218L Windows 7 Pro (64 bits) Samsung SyncMaster 226BW 
KeyboardPowerCaseMouse
Logitech Access Keyboard 600 Corsair 650W HAF 932 OCZ Equalizer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Build Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Build Logs › Need Help OC i7-930 to 4.1GHz