THERE! LOL NETHING ELSE YOU NEED?
i also did this. ropey tell me to do that now my clocks on cpu-z goes to 2500 somthing
That about does it
Restart your system and enter the AwardBIOS setup by pressing the <Delete> key upon restart.
Enter your advanced
In step formation:
Set "CPU Speed" to "Manual"
Set "CPU External Frequency" (MHz) to 140 (133 is your unclocked spec)
Leave your "Vcore" at "Auto" ( You will change this later but for now you want to find your maximal overclock without raising the core voltage)
Move to "Chip Configuration"
Set your "SDRAM Configuration" to "By SPD"
Set your "Chipset Clock Mode" to "Asynchronous" (This is referred to a PCI/AGP lock and will keep your agp and pci bus both within their rated specs whilst you raise the CPU. Normally if you did not do this you would raise both your PCI and AGP bus out of spec and would easily render your system instable).