Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 219

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #2181 of 6472
Darekk1990

One last thing you could try. Try upping Northbridge Volts up to 1.4 volts then put RAM at 900MHz 5-5-5-18 again. Try different volts on RAM. If stable, down Northbridge volts one step at a time and test for stability

Sometimes, Northbridge needs higher volts in combination with certain mem types...
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2182 of 6472
For 1.4v on NB i will need active cooling system?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
post #2183 of 6472
Quote:
Originally Posted by Darekk1990 View Post
For 1.4v on NB i will need active cooling system?
No you'll be fine just at stock cooling..

But however I'm afraid that vNB is not the issue as 1.3V is plenthy even for Quad core CPU on that motherboard @ 450MHz FSB and 4GB of RAM..

NOTE that C2Quad is way more harder on NB than C2Duo CPU..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2184 of 6472
I gonna try this setting last time.But tommorow , now i going to sleep.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
post #2185 of 6472
hello guys, i have a problem with this board, I have a core 2 duo E8400, and I bought this pack 2x KHX8500D2T1K2/4G DDR2- 1066MHz. I start the computer and appears "Start windows"(windows 7) and stops there, so I unplug one memory and this time went all the way to windows, so I plug again the memory and stops again in the "star windows". I went in BIOS and I saw that the memory was in 800Mhz and I changed to 1066Mhz. So I restarted the computer and stops in the same screen. I unplug the memory's and put 2x 2/4G DDR2- 800mhz and the computer went all the way to windows.

what can I do?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Asus P5Q Pro Turbo PNY DDR2 2x2GB 1066Mhz 
OSMonitorKeyboardPower
Windows 7 HP Loghitec 1000watts 
CaseMouse
PSG Loghitec 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Asus P5Q Pro Turbo PNY DDR2 2x2GB 1066Mhz 
OSMonitorKeyboardPower
Windows 7 HP Loghitec 1000watts 
CaseMouse
PSG Loghitec 
  hide details  
Reply
post #2186 of 6472
Hey guys as i say.Only 6-6-6-18 2.2v is full stable.

Here is 3 screens from my bios settings.What should i do to have stable 5-5-5-18 900 mhz?.I try all combinations but all fail.

http://img854.imageshack.us/i/73075409.jpg
http://img215.imageshack.us/i/58770099.jpg
http://img218.imageshack.us/i/56622121.jpg/
Edited by Darekk1990 - 3/7/11 at 6:38am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
post #2187 of 6472
Quote:
Originally Posted by kipoly View Post
hello guys, i have a problem with this board, I have a core 2 duo E8400, and I bought this pack 2x KHX8500D2T1K2/4G DDR2- 1066MHz. I start the computer and appears "Start windows"(windows 7) and stops there, so I unplug one memory and this time went all the way to windows, so I plug again the memory and stops again in the "star windows". I went in BIOS and I saw that the memory was in 800Mhz and I changed to 1066Mhz. So I restarted the computer and stops in the same screen. I unplug the memory's and put 2x 2/4G DDR2- 800mhz and the computer went all the way to windows.

what can I do?
What's your motherboard?

P5Q Pro or P5Q Pro TURBO?

And you're running 8GB of RAM 2 kits of 2x2GB Hyper X memory??

Try to set your North Bridge voltage a.k.a NB voltage to 1.30V ad boot to Windows again..

Also run RAM @ 800MHz as P5Q Pro has a problem with this HyperX RAM running @ 1066MHz..

Try these:

RAM frequency=800
STRAP= AUTO

RAM Timing Control= MANUAL

5-5-5-15-3-AUTO[52]-6-3

8-3-5-4-6-4-7

14-5-1-6-6

DRAM Static Read Control= DISABLED
DRAM read Training = DISABLED
MEM OC Charger= ENABLED
AI Clock Twister=MODERATE
AI Transaction Booster= MANUAL
Performance Level= 10

CPU PLL Voltage=1.54
CPU GTL= 0.65x
FSB Termination Voltage= 1.20
DRAM Voltage= 1.90V
NB Voltage= 1.30V

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2188 of 6472
Quote:
Originally Posted by Darekk1990 View Post
Hey guys as i say.Only 6-6-6-18 2.2v is full stable.

Here is 3 screens from my bios settings.What should i do to have stable 5-5-5-18 900 mhz?.I try all combinations but all fail.

http://img854.imageshack.us/i/73075409.jpg
http://img215.imageshack.us/i/58770099.jpg
http://img218.imageshack.us/i/56622121.jpg/
You should disable CPU TM Function and Execute Disable Bit when overclocking. Also, isn't your CPU PLL low for a 65nm CPU?

Did you try raising NB Volts? (Probably will not help, but worth a shot, none the less).

Another tip I read somewhere when overclocking Dual Core 65nm with the P5Q Pro was to set the NB skew to 100 and the CPU skew to 400. Doubt this will help your RAM, but why not try. Nothing to loose.

Also set your Ai Transaction booster to manual and select Performance Level 10. I see you are at 14 when at Auto. You are loosing much performance.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2189 of 6472
Quote:
Originally Posted by KingT View Post
What's your motherboard?

And you're running 8GB of RAM 2 kits of 2x2GB Hyper X memory??

CHEERS..
If this is true, no wonder he has problems overclocking RAM at the default timings. 8GB in these boards are a nightmare.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2190 of 6472
Quote:
Originally Posted by Darekk1990 View Post
Hey guys as i say.Only 6-6-6-18 2.2v is full stable.

Here is 3 screens from my bios settings.What should i do to have stable 5-5-5-18 900 mhz?.I try all combinations but all fail.

http://img854.imageshack.us/i/73075409.jpg
http://img215.imageshack.us/i/58770099.jpg
http://img218.imageshack.us/i/56622121.jpg/
Set:

FSB freq= 450MHz
RAM frequency=900
STRAP= AUTO

RAM Timing Control= MANUAL

5-5-5-15-3-AUTO[52]-6-3

8-3-5-4-6-4-7

14-5-1-6-6

DRAM Static Read Control= DISABLED
DRAM read Training = DISABLED
MEM OC Charger= ENABLED
AI Clock Twister=MODERATE
AI Transaction Booster= MANUAL
Performance Level= 10 << This will apear when you set AI Transaction Booster to MANUAL..

ALSO your Voltages are too low!!!

SET THESE:

Vcore=1.xxV (whatever your CPU needs)
CPU PLL Voltage=1.56
CPU GTL= 0.65x
FSB Termination Voltage= 1.30
DRAM Voltage= 2.10V
NB Voltage= 1.30V
SB voltage = 1.20
PCIE SATA Voltage= 1.60

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)