Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 225

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #2241 of 6481
Quote:
Originally Posted by wumpus View Post
am I the only one who has to waste hours tweaking GTL's on these boards to get high FSB stable? (~500+)
Just for sake of knowledge, what have you came up with?

I decided to try and achieve a higher FSB and lower my multi. I had a HECK of a time getting +460FSB to last 2 minutes in Prime. As soon as I upped my NB GTL from .63 to .65, 463FSB seems very stable. 463 is about all I'm going for on this chip. 463x8= 3.7. That was my max when using x10. I doubt that will change.

I just don't know when to adjust NB GTL and CPU GTL. I am wondering if the CPU GTL setting has something to do with why my CPU gets so voltage hungry above 3.55Ghz. Its basically 3.55Ghz - 1.38; 3.6Ghz - 1.4; 3.7Ghz - 1.46. I couldn't get 3.75Ghz even with 1.48. All those with LLC enabled. 1.46v is my temp limit that I'm comfortable with.

1.26VID, one of the best Air coolers, decent case air flow, good Mobo. I hoped for 4Ghz, but I can't get close.
Edited by Blacklac - 3/12/11 at 5:12am
    
CPUMotherboardGraphicsRAM
Q9650 @ 4.3Ghz Gigabyte P45-UD3R EVGA GTX 960 SSC G.Skill Pi PC2-8800 8GB 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 460a 120GB LG SuperBlu Bluray/HD DVD drive Thermalright Archon Push/Pull corsair H75 (GPU) 
OSMonitorPowerCase
Win 8.1 64bit Panasonic 50" G25 Plasma Seasonic X650 Lian Li PC-B25F 
Mouse
Razer Mamba 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q9650 @ 4.3Ghz Gigabyte P45-UD3R EVGA GTX 960 SSC G.Skill Pi PC2-8800 8GB 
Hard DriveOptical DriveCoolingCooling
OCZ Vertex 460a 120GB LG SuperBlu Bluray/HD DVD drive Thermalright Archon Push/Pull corsair H75 (GPU) 
OSMonitorPowerCase
Win 8.1 64bit Panasonic 50" G25 Plasma Seasonic X650 Lian Li PC-B25F 
Mouse
Razer Mamba 
  hide details  
Reply
post #2242 of 6481
Quote:
Originally Posted by donrapello View Post
Ok. Those settings should be easy enough for a bit downclocking
My resolution is maxed at 1920x1200 too so it's good.
I'm starting to bench my Gtx for 850/2000 now.
yeah, man Just post your benchmarks as you run them, and I will try to run the same benchmarks and compare
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2243 of 6481
@ turrican9

Quote:
Originally Posted by KingT View Post
I would like you to try a BIOS chip from P5Q-E in your P5Q Pro TURBO and to report if motherboard POST's,and what still works (PCIE slots,audio,firewire,SATA ports,USB)..

Overclocking report is mandatory also if TURBO manages to POST with BIOS chip from P5Q-E..
So nay toughts on this one??

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2244 of 6481
Quote:
Originally Posted by KingT View Post
@ turrican9



So nay toughts on this one??

CHEERS..
Well... I fear that there is no guarantee that my P5Q Pro Turbo would not take damage. Booting up using bios from a board with a very different layout.. I've actually done this in 1997 on a Socket 7 board. And it booted. Used a totally different bios from another MB manufacturer.

Most likely it would not take damage though. A few weeks ago I was thinking I could use the P5QL-CM bios chip and flash it with a P5Q-E bios to try on my Pro Turbo. Then flash it back to the P5QL-CM bios when finished.

Easiest for me right now would be to hot-flash the P5QL-CM bios chip. Drop it in my Pro Turbo when powered up in DOS.

Thoughts?
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2245 of 6481
KingT

I have booted to DOS (Loosen bios chip for easy removal) using a USB stick with my P5Q Pro Turbo.

I've removed P5QL-CM's bios chip.

I've switched the bios chips while in DOS. Trying to flash P5QL-CM's chip with the latest P5Q-E bios.

However,

When I use: afu236u/ip5qe.rom/n/pbnc i get this message: ERROR: Unable to open ROM file

Is there some more command switches I need?? Where are you KingT??

Edit: I've done it wrong, i needed spacing between the command switches, like this: afu236u /ip5qe.rom /n /pbnc

However, I now get a bios size missmatch error when trying to flash.
Edited by turrican9 - 3/12/11 at 4:50am
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2246 of 6481
Quote:
Originally Posted by turrican9 View Post
KingT

I have booted to DOS (Loosen bios chip for easy removal) using a USB stick with my P5Q Pro Turbo.

I've removed P5QL-CM's bios stick.

I've switched the bios chips while in DOS. Trying to flash P5QL-CM's chip with the latest P5Q-E bios.

However,

When I use: afu236u/ip5qe.rom/n/pbnc i get this message: ERROR: Unable to open ROM file

Is there some more command switches I need?? Where are you KingT??

Edit: I've done it wrong, i needed spacing between the command switches, like this: afu236u /ip5qe.rom /n /pbnc

However, I now get a bios size missmatch error when trying to flash.
Yeah that's the problem,you cannot flash a different sized BIOS file via AFUDOS..

That's why I want you to try a BIOS chip from P5Q-E (it has 2MB BIOS file) onto P5Q Pro TURBO and to report if mobo POST's..

There's no harm done,either it would POST or not..

Also if it POST then report what is working (SATA,USB,audio,Firewire,PCIE slots<<all etc) and to report stability/overclocking..

When you get P5Q-E you can use a BIOS chip from P5QL-CM and to hotflash it to E BIOS and to try it in the TURBO motherboard..

CHEERS..
Edited by KingT - 3/12/11 at 4:55am
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2247 of 6481
Quote:
Originally Posted by KingT View Post
Yeah that's the problem,you cannot flash a different sized BIOS file via AFUDOS..

That's why I want you to try a BIOS chip from P5Q-E (it has 2MB BIOS file) onto P5Q Pro TURBO and to report if mobo POST's..

There's no harm done,either it would POST or not..

Also if it POST then report what is working (SATA,USB,audio,Firewire,PCIE slots<<all etc) and to report stability/overclocking..

When you get P5Q-E you can use a BIOS chip from P5QL-CM and to hotflash it to E BIOS and to try it in the TURBO motherboard..

CHEERS..
P5Q Pro Turbo and P5QL-CM's manuals says they have 8MB bios chips. So you're saying the P5Q-E has a 2MB chip?

Also, what If I try to flash P5Q Pro Turbo chip with the P5Q-E's bios instead of the P5QL-CM chip? Would that be the same?

Edit: I see, same bios chips but different bios sizes...
Edited by turrican9 - 3/12/11 at 4:59am
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2248 of 6481
Quote:
Originally Posted by turrican9 View Post
Also, what If I try to flash P5Q Pro Turbo chip with the P5Q-E's bios instead of the P5QL-CM chip? Would that be the same?
The same thing,it's not a issue with a BIOS chip size but in BIOS file size that's been already flashed on it..

A BIOS chip with 1MB file on it = no go with a 2MB BIOS file..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2249 of 6481
Quote:
Originally Posted by KingT View Post
The same thing,it's not a issue with a BIOS chip size but in BIOS file size that's been already flashed on it..

A BIOS chip with 1MB file on it = no go with a 2MB BIOS file..

CHEERS..
Tried Uniflash? http://www.bioscentral.com/misc/downloads.htm#

That util was **** old!
Edited by turrican9 - 3/12/11 at 5:17am
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2250 of 6481
Quote:
Originally Posted by turrican9 View Post
Tried Uniflash? http://www.bioscentral.com/misc/downloads.htm#

That util was **** old!
No,but I don't bleive that it would make any difference..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)