Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 247

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #2461 of 6495
Quote:
Originally Posted by turrican9 View Post
2 min. per Large FFT's has gone OK for half an hour now at 470FSB. This is something my Q9650 never would have done at this FSB, in this board.
You should have done my 320K>320K Custom 15 min per size test,as it really work wonders with weak FSB..

Quote:
Originally Posted by turrican9 View Post
If it continues, I will put it at regular 15 min. overnight, when I go to bed. I have to find this Q9400's max FSB with the regular P5Q Pro Turbo bios before I attempt that P5Q-E bios chip again. Anyway, I really needed the experience from the P5Q-E.
Yeah I'm expecting that E BIOS chip testing..

Quote:
Originally Posted by turrican9 View Post
My Q9650 has bigger differences between the cores than yours. you see some connection here? Between Core temp differences and highest achievable FSB with one GTL? My Q9400 VS your Q9550 VS my Q9650 In my Q9400 the last core cannot go under 40C (stuck there).
I don't think that performance of core temp sensors are a indication of FSB OCing in any way..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2462 of 6495
Quote:
Originally Posted by KingT View Post
You should have done my 320K>320K Custom 15 min per size test,as it really work wonders with weak FSB..



Yeah I'm expecting that E BIOS chip testing..



I don't think that performance of core temp sensors are a indication of FSB OCing in any way..

CHEERS..
Had to push it to 1.4vFSB. And guess what I used to increase VTT? Yeah, you guessed it! TurboV!!! And it has been running regular 15 min FFT's for about half an hour now. at 1.38vFSB it failed in the speed testing after 30 + minutes. A very good result. So I'm confident it will run for hours at 1.4vFSB. And If thats not stable I am very confident that 468FSB will be.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2463 of 6495
Guys i have one question.

When i overclock my RAM artifacts appear to me.

With no O/C my system is full stable in P95 and Games.But when i O/C my RAM from 800 mhz 5-5-5-18 1.8v to 900 mhz 5-5-5-18 2.0v artifacts appear to me WTH?.

My GTX 285 is fully stable 3 hours in FurMark.

So my question is.When overclocked ram is not stable it can show me artifacts in games?

PS: I never O/C my GTX 285.

Almost forgot.When this artifacts appear to me , my game freeze.And all what i can do is reset.

When this happ artifacts look more or less like purple walls and smeared letters / numbers
Edited by Darekk1990 - 3/22/11 at 9:58pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
post #2464 of 6495
Quote:
Originally Posted by Darekk1990 View Post
Guys i have one question.

When i overclock my RAM artifacts appear to me.

With no O/C my system is full stable in P95 and Games.But when i O/C my RAM from 800 mhz 5-5-5-18 1.8v to 900 mhz 5-5-5-18 2.0v artifacts appear to me WTH?.

My GTX 285 is fully stable 3 hours in FurMark.

So my question is.When overclocked ram is not stable it can show me artifacts in games?

PS: I never O/C my GTX 285.

Almost forgot.When this artifacts appear to me , my game freeze.And all what i can do is reset.

When this happ artifacts look more or less like purple walls and smeared letters / numbers
Test your OC'd RAM with memtest Windows version 4.0..

Lounch two instances of it and set 1700MB of RAM for each..

Test until it reaches at least 100% on each instance..

If you pass then it's not a RAM problem,and then I would suggest you to bump Vcore a bit..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2465 of 6495
Ok but it will be 3.4GB.

My system can see only 3.25GB.

nvm i gonna start testing right now 2x1700mb.

OMG so many errors.Its unable to 2x1700mb

I need to open 3x1000mb

What should i do now?.

Ram is set to 900 mhz 5-5-5-18 and 2.1v

Bump voltage to 2.2?

Edited by Darekk1990 - 3/23/11 at 2:32am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core 2 Duo E6750 ASUS P5Q PRO EVGA GTX 285 Corsair XMS2 2x2 GB CM2X2048-6400C5C 
Hard DriveOSKeyboardPower
500G F1 WIN XP PRO SP3 RAZER ARCTOSA OCZ ModXStream 500W 
MouseMouse Pad
RAZER DEATHADDER RAZER VESPULA 
  hide details  
Reply
post #2466 of 6495
Quote:
Originally Posted by KingT View Post
First welcome..
Why would you need a motherboard CD when there's everything on Asus.com for you to download...
sorry to interrupt again. For some reason the USB ports on the board are not working, and I remember installing something off the disk that got them working when I first got the board. So either I'm not looking hard enough, or the ASUS dowload site doesn't have USB drivers or whatever software I'm looking for
post #2467 of 6495
Quote:
Originally Posted by Malakai View Post
sorry to interrupt again. For some reason the USB ports on the board are not working, and I remember installing something off the disk that got them working when I first got the board. So either I'm not looking hard enough, or the ASUS dowload site doesn't have USB drivers or whatever software I'm looking for
Select OS and motherboard type,download chipset driver,unpack it and install it and reboot.

If your USB ports don't work after install of chipset drivers then tthere's something else wrond there..

Also check in BIOS USB settings in USB Configuration meni,and set it like this:

USB Functions = ENABLED
USB 2.0 Controller = ENABLED
USB 2.0 Controller Mode = HiSpeed
BIOS EHCI Hand-off = ENABLED
Legacy USB Support = AUTO

GOOD LUCK..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2468 of 6495
KingT,

I'm typing this from my P5Q Pro Turbo with the P5Q-E bios chip installed. The GTL's are not working Just as I thought when thinking on my first experience (When I had no experience with the P5Q-E how the GTL's should respond).

No matter what I try at 475FSB, not matter vFSB or GTL multipliers Core 0 or 1 always fails. Usually under a minute, sometimes it can go over a minute. But It is random. Has nothing to do with GTL adjustments. using Large FFT's 320KB.

Also, if both GTL's worked correctly I should be able to down the 1/3 GTL to the point where the last two cores fail. This I have done in my P5Q-E. In the Turbo with the P5Q-E bios it's always Core 0 or 1 who fails.

The P5Q-E responds to the GTL's. And it shows pretty quickly.

My first conclusion was that only one GTL is working, and this confirms it.
Edited by turrican9 - 3/23/11 at 10:13am
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #2469 of 6495
Quote:
Originally Posted by turrican9 View Post
KingT,

I'm typing this from my P5Q Pro Turbo with the P5Q-E bios chip installed. The GTL's are not working Just as I thought when thinking on my first experience (When I had no experience with the P5Q-E how the GTL's should respond).

No matter what I try at 475FSB, not matter vFSB or GTL multipliers Core 0 or 1 always fails. Usually under a minute, sometimes it can go over a minute. But It is random. Has nothing to do with GTL adjustments. using Large FFT's 320KB.

Also, if both GTL's worked correctly I should be able to down the 1/3 GTL to the point where the last two cores fail. This I have done in my P5Q-E. In the Turbo with the P5Q-E bios it's always Core 0 or 1 who fails.

The P5Q-E responds to the GTL's. And it shows pretty quickly.

My first conclusion was that only one GTL is working, and this confirms it.
OK but does values beside original available on P5Q Pro TURBO work, example 0.67x,0.64,0.62x,0.60x etc.. when set for all four cores..

Even if separate tuning doesn't work maybe you can take advantage of high range of GTL multipliers for all four cores..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #2470 of 6495
Quote:
Originally Posted by KingT View Post
OK but does values beside original available on P5Q Pro TURBO work, example 0.67x,0.64,0.62x,0.60x etc.. when set for all four cores..

Even if separate tuning doesn't work maybe you can take advantage of high range of GTL multipliers for all four cores..

CHEERS..
I've already tried a High range of multipliers. (Not needed in the real P5Q-E. using a somewhat High vFSB (1.34 - 1.36) and between x0.64 -x0.67, at the right cores and it is good for 480FSB +. And If unstable and changing the right multi or vFSB it shows very clearly in stability testing. In the Pro Turbo nothing changes.

I've already tried 1.3vFSB up to 1.38vFSB and GTL multi's from 0.555 up to 0.68x. Also switched different combinations between the cores. Even tried using same multi on both cores. Man, I'm telling you, they do not respond.

From all this testing it is pretty obvious that even with one working GTL, finetuning that will give me little stability.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)