Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 320

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #3191 of 6481
Quote:
Originally Posted by KingT View Post
It's the same thing..

This RAM is useless on Asus P5Q mobos..

I tried 459Mhz FSB and RAM @ 1100MHz CL5 w/ 2.2V ,PL=10 (tried PL8 as well) every trick I had and still no boot to OS..

So stuck at 920MHz,CL5,PL10 and still I have over 9GB/s bandwidth in MaxxMeM benchmark..
CHEERS..
Tried CAS 6-6-6-18 at 1100MHz? You have to use Performance Level 11 in order for CAS 6 to boot...
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #3192 of 6481
Quote:
Originally Posted by turrican9 View Post
Tried CAS 6-6-6-18 at 1100MHz? You have to use Performance Level 11 in order for CAS 6 to boot...
No I haven't as these Hypers do 1150MHz ,5-5-5-18, 2.25V on a Gigabyte EP45..

But I did tried it on my P5Q Pro though and stiil it was no go..

To me that would be really frustrating..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #3193 of 6481
Quote:
Originally Posted by KingT View Post
No I haven't as these Hypers do 1150MHz ,5-5-5-18, 2.25V on a Gigabyte EP45..

But I did tried it on my P5Q Pro though and stiil it was no go..

To me that would be really frustrating..

CHEERS..
Sorry, forgot to mention that PL-11 are only needed if 1:1 Mem:FSB, when CAS 6. If other mem multiplier you can use PL-10 or lower. But you probably know this...
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #3194 of 6481
Quote:
Originally Posted by turrican9 View Post
Sorry, forgot to mention that PL-11 are only needed if 1:1 Mem:FSB, when CAS 6. If other mem multiplier you can use PL-10 or lower. But you probably know this...
Yeah..

But ATM I'm really happy with up and running my Raven..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #3195 of 6481
Quote:
Originally Posted by KingT View Post
Yeah..

But ATM I'm really happy with up and running my Raven..

CHEERS..
Yeah, as I've said, very happy for you !
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #3196 of 6481
settings for 3.8 not working....
crash on prime after 30min
it seams it cant pass 3.6 for stable settings
Edited by Erper - 5/14/11 at 11:30am
SubZero
(15 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 6600k maximus viii hero Asus Strix RX 480 Corsair 
Hard DriveCoolingOSMonitor
Samsung Evo 850 Corsair H55i Windows 7 Ultimate SP1 HP 23xi 
KeyboardPowerCaseMouse
Roccat Isku Corsair CX 750M Corsair 300R Roccat Kiro 
Mouse Pad
Roccat Taito 
  hide details  
Reply
SubZero
(15 items)
 
  
CPUMotherboardGraphicsRAM
intel i5 6600k maximus viii hero Asus Strix RX 480 Corsair 
Hard DriveCoolingOSMonitor
Samsung Evo 850 Corsair H55i Windows 7 Ultimate SP1 HP 23xi 
KeyboardPowerCaseMouse
Roccat Isku Corsair CX 750M Corsair 300R Roccat Kiro 
Mouse Pad
Roccat Taito 
  hide details  
Reply
post #3197 of 6481
I have just tried FSB on this mobo and it actually does worse than my P5Q Pro..

I dropped multi to 6x ,used 1.5V for NB and FSB, 1.60V PLL and it did only 518MHz, it froze on 520MHz twice..

It may be something else hindering it dunno,but I would not try it again..

Also I have found that it was not 1.30V for vFSB and vNB what gave me instability @ 459MHz FSB,actually it was these:

DRAM Static RAD Control
DRAM Dynamic Write Control
DRAM Read Training
DRAM Write Training

If I leave them on AUTO then there's no problems,but if I set them to DISABLE or ENABLE,then workers are dropping like flies in P95..

Maybe it's just one of them causing troubles but I will not bother and just set them all @ AUTO..

@ turrican9

How high FSB your P5Q Pro TURBO hits with 1.5V for NB and vFSB?

CHEERS..
Edited by KingT - 5/14/11 at 1:02pm
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #3198 of 6481
Quote:
Originally Posted by KingT View Post

@ turrican9

How high FSB your P5Q Pro TURBO hits with 1.5V for NB and vFSB?

CHEERS..
I don't know. I was using TurboV and totally insane vNB on most of my attempts. Never tested specific what I could do on 1.5vNB. I was going crazy and just pushed the crap out of everything..

If you wanna succeed in the high FSB departement you have to go totally crazy with vFSB. We're talking 1.8v +...
Edited by turrican9 - 5/14/11 at 1:10pm
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #3199 of 6481
Quote:
Originally Posted by turrican9 View Post
I don't know. I was using TurboV and totally insane vNB on most of my attempts. Never tested specific what I could do on 1.5vNB. I was going crazy and just pushed the crap out of everything..

If you wanna succeed in the high FSB departement you have to go totally crazy with vFSB. We're talking 1.8v +...
I tried twice with vFSB on AUTO and vFSB at 1.5 and it froze @ exactly 520MHz so I don't think it's vFSB that holds me back..

vNB was @ 1.5V at both attempts..

Maybe it's these HyperX's just sucks on these P5Q mobos and are giving me a hard time..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #3200 of 6481
Quote:
Originally Posted by KingT View Post
I tried twice with vFSB on AUTO and vFSB at 1.5 and it froze @ exactly 520MHz so I don't think it's vFSB that holds me back..

vNB was @ 1.5V at both attempts..

Maybe it's these HyperX's just sucks on these P5Q mobos and are giving me a hard time..

CHEERS..
Yeah, it may be your RAM stopping you.

I would recommend you to stop what you're doing now. Since you do not have TurboV you must boot Windows at insane Voltages every time. Please do not risk your motherboard again... ?
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)