Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 420

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #4191 of 6486
Quote:
Originally Posted by ocman View Post
turrican9, try up the VCore on the P5Q mobos and see if it will be stable.
Those overclocks that BSOD'd after long uptimes (many days/a week.) were already tested 100% stable with Prime95 Blend, Large FFTs and small FFT's.

And they were most certainly RAM issues building up over time. But after removing cmos battery and clearing cmos the problems would dissapear again. But would come back after long uptimes.

I gave up and won't bother installing these boards again. My Gigabyte board is working perfectly for the needs I have with my secondary system.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #4192 of 6486
I'm sketched out about overvolting, anything over 1.4 is bad right?
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #4193 of 6486
Ok here goes nothing, these are my current settings that run stable. I have been going from 400FSB to 450 then upping vcore from 1.25v - 1.38 with no luck. Getting lots of bsod, sometimes a smooth boot it passes small FFTs but fails large ones. HAS to be a ram issue.

First one here is just proof that I have osx up and running. And yes I have my comp running trough my lg flat screen. Only 1080p, but make the icons big and its not too bad.



next


and...


...


then...


and...


...


...


...


...


posted everything that I felt may be relevant. This is my first OC so be kind.
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #4194 of 6486
dlerch

Set Ai Clock Twister to Lighter and Disable All Pullins.
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Core i7 2600K@4.5GHz Asus P8P67 Pro 3.0 (B3) EVGA GTX 1070 SC Black Edition 4x4GB Corsair Vengeance 1600-9-9-9-24-2t-1.5v 
Hard DriveOptical DriveOSMonitor
M500 240GB SSD for OS, 2x256GB M4's Raid0 for ... Generic Windows 10 Pro 64 Bit Asus VK266H 
PowerCase
Corsair RM 750x Cooler Master Storm Scout 
  hide details  
Reply
post #4195 of 6486
I did that, set fsb to 450 tried voltages from 1.25-1.3. Got nothing but bsod on startup. I'll try and push it a little further, maybe to 1.34?
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #4196 of 6486
I think I have figured it out. I need to start at 333 fsb and VID. Then slowly bump up fsb 5-10mhz and voltages every other reboot. Seems to have stopped the bsod panics anyway.
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #4197 of 6486
Is that what you've had the DRAM voltage at this whole time? That is way too low if so it needs to be at around 2.00

Disable pull ins set 12 for performance level, your Vcore to 1.35 and fsb term to 1.38

And lock your FSB strap to 400 remember only after setting performance level otherwise it will not reboot and CPR will kick in.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Xeon E5506  Intel DX58SO Evga GTX 460 1GB 8gb Ramaxel 12800u  
Hard DriveCoolingOSMonitor
x2 Western Digital 500 RAID0 Stock Intel Windows 10 x64 Vizio  
KeyboardPowerCaseMouse
HP Seasonic 650 Lian Li V1200 Microsoft Comfort Mouse 
Audio
Realtek 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Xeon E5506  Intel DX58SO Evga GTX 460 1GB 8gb Ramaxel 12800u  
Hard DriveCoolingOSMonitor
x2 Western Digital 500 RAID0 Stock Intel Windows 10 x64 Vizio  
KeyboardPowerCaseMouse
HP Seasonic 650 Lian Li V1200 Microsoft Comfort Mouse 
Audio
Realtek 
  hide details  
Reply
post #4198 of 6486
Is it ok just to jump from 333fsb to 450? Or should I bump it up slowly?
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
post #4199 of 6486
Try to get it stable at 400 first with the strap set at 400 before you try more. One of the things you learn when you get more seasoned at overclocking is narrowing down the tolerances of your components first makes things alot easier.

Like RAM if you keep the multi low you can find the max frequency and at what timings that allows you to take it out of the possible causes of instability. Say you find its capable of 960 mhz stable with 5-5-5-18-5-50 timings (just an example). That means it would be good up to 480 FSB (doesnt mean the cpu will get near that however).

One more thing I noticed but just double checked your first timings where you have 3 RAS to RAS and precharge is way too tight, mine is showing 5 for that in memset right now. And I have 1gb sticks. Your getting way too agressive Im surprised your rig is even getting into the OS.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Xeon E5506  Intel DX58SO Evga GTX 460 1GB 8gb Ramaxel 12800u  
Hard DriveCoolingOSMonitor
x2 Western Digital 500 RAID0 Stock Intel Windows 10 x64 Vizio  
KeyboardPowerCaseMouse
HP Seasonic 650 Lian Li V1200 Microsoft Comfort Mouse 
Audio
Realtek 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Xeon E5506  Intel DX58SO Evga GTX 460 1GB 8gb Ramaxel 12800u  
Hard DriveCoolingOSMonitor
x2 Western Digital 500 RAID0 Stock Intel Windows 10 x64 Vizio  
KeyboardPowerCaseMouse
HP Seasonic 650 Lian Li V1200 Microsoft Comfort Mouse 
Audio
Realtek 
  hide details  
Reply
post #4200 of 6486
ok, trying this now. I'm running like 5-5-5-17 5-5 -6-5. Slowly upping vcore. Only failed on core 3 during large FFTs. So I'm hoping I can narrow it down.

I'm still not sure how all the settings in ram timings correlate.
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
lv426
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k 4.5gHz HT enabled p8p67 Deluxe Rev 3 MSI GTX 570 FROZR III in SLI 16gb of Gskill Ripjaws 1600 
Hard DriveOSMonitorPower
x2 1TB 7200rpm dual boot Win7 64 Ult. & OSXx64 Hackintosh LG 42inch HD TV Kingwin Mach 1 - 1000w 
Case
Fractal Design Define XL Full Tower 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)