**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 520

Originally Posted by olly230 

@ocman
I tried routing through the gfxcards but I'd rather have it routed around the back of the mobo (the R3 case has lots of noce holes to help this)
One other thing that is frustrating me is the lack of decent fan control.
I have two extra fans via molex to boost through-put if it gets warm in there but other wise they just whisper along at 800rpm.
THere are 4 fan headers on the board.
CPU - I have a linked rear exhaust fan to this.
PWR - RPM counter for rear exhaust attached to this.
CHA 1 - Front fan
CHA 2 - Roof fan
I'm looking at PC probe and SPeed fan.
PC probe seems to be telling the truth.
AI suite seem to set temp profiles for the CPU ok but has rudimentary presets for chassis fans no control(mas) silent/standard/Turbo
Fanspeed shows Winbond W8336 & ATK0110
The ATK show CPU CHassis and POwer at 1540RPM but none of my fans are doing that... WHat is it?
Is there any explanation of the Advance settings under configure in fan speed relating to W38336?
FAN divisors - PWM mode - PWN type - FAN mult - FAN div - reversePWM logic?????

Originally Posted by ocman 

Hi all club members,
Ket over at XS has done it again and released the latest (maybe the final) BIOS updates for various P5Q series motherboard.
Download: P5Q Series mBIOS DL
Download: P5Q Deluxe 2301 mBIOS
Happy Overclocking!!!
ocman.
Below is C&P from XS:

---

03-07-2011, 09:21 AM #2276
Ket
Xtreme Guru
Join Date: Apr 2004
Location: United Kingdom
Posts: 4,274
As always, I've tested the modded BIOS and can gaurantee it works. For other P5Q mBIOSes, I can't gaurantee they will work because I don't own every single P5Q Series board to test. I can only say for the mBIOSes I'm unable to test I'm 98% certain they will work but should you choose to use any of the modded BIOSes you do so at your own risk of knowing sometimes BIOS flashes just go wrong. So have a recovery plan handy - just in case.
P5Q Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update Marvell O-ROM to 1.1.0.L73
- Update intel O-ROM to v9.6.0.1014
P5Q Pro Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update Marvell O-ROM to 1.1.0.L73
- Update intel O-ROM to v9.6.0.1014
P5Q-E Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update Marvell O-ROM to 1.1.0.L73
- Update marvell PXE to v6.60.2.3
- Update intel O-ROM to v9.6.0.1014
P5Q Deluxe Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update Marvell O-ROM to 1.1.0.L73
- Update marvell PXE to v6.60.2.3
- Update intel O-ROM to v9.6.0.1014
P5Q Premium Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update Marvell O-ROM to 1.1.0.L73
- Update marvell PXE to v6.60.2.3
- Update intel O-ROM to v9.6.0.1014
P5Q Pro Turbo Changelog:
- Update Marvell O-ROM to 1.1.0.L73
- Update intel O-ROM to v9.6.0.1014
P5QL Pro Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
P5QL-EM Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update Marvell O-ROM to 1.1.0.L73
P5QL-E Changelog:
- Update memory table to P5Q Pro Turbo 602
- Update P6 table to P5Q Premium 2406
- Update intel O-ROM to v9.6.0.1014
As for overclocking potential.. no idea. It should be better than any vanilla BIOS. Its also worth using these mBIOSes (where applicable) if you are experiencing SSD compatibility problems, the updated intel O-ROM should fix most.

---

Source URL

Originally Posted by ocman 



 
olly230, glad it worked. I know it's not the best way to do it... but the holes should were designed for that purpose I believe... Weird. So old age feeling.

Hope that extra 4 pin didn't cost you much...

@ TOO They are the older batch... from P5Q PRO Turbo mBIOS being 0401... I know.

@ Reuma That 2600K @ 5 GHz is looking Great, but I wonder if anyone can manage to run 2600K or 2700K @ 5GHz with 1.45V or less VCore.

P.S.: This is my 1700th Post!!!

Originally Posted by ocman 

I've noticed you have been folding for some time, would you also be using the P5Q3 for folding in future? It would be quite a boost in your scores and ranking like at least twice.

I might need to re-partition this seagate hdd to install winxp x64 just to check out if the upgrade is worth it or not... while it seems not worth it in your case.