Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)
New Posts  All Forums:Forum Nav:

**Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!) - Page 68

Poll Results: Do you prefer the new OCN?

 
  • 35% (32)
    Yes!
  • 15% (14)
    No!
  • 14% (13)
    Yes and No!
  • 34% (31)
    Don't give a damn about it! (LOL)
90 Total Votes  
post #671 of 6481
3.2 was a typo

already changed it. Will list all settings in a minute, for now i'll post a snapshot of my cpu-z.



My settings are:

FSB Frequency 475
Cpu ratio setting 8.0
PCIE Frequency 100
FSB Strap Auto
Dram Frequency 951 (original is 800)

Memory: 5-5-5-15-3-52-6-3
Rest left on auto
Dram Static Read control Auto
Dram Read Training Disabled
Mem OC Charger Disabled
AI Clock Twister Auto
AI Transaction booster Auto

CPU voltage 1.32500
GTL reference auto
PLL Voltage auto
FSB Term.voltage auto
Dram voltage 2.10
NB voltage 1.26
SB voltage auto
s-ata voltage auto

LLC enabled
cpu spread spectrum disabled
pcie spread spectrum disabled
cpu clock stew normal
nb clock stew normal
cpu Margin Enhancement Performance Mode
Edited by Pir - 11/28/10 at 12:58pm
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
post #672 of 6481
Edit following settings:


Dram Static Read control = DISABLED
Dram Read Training Disabled
Mem OC Charger ENABLE
AI Clock Twister MANUAL
Performance level = 10



GTL reference = 0.65x
PLL Voltage = 1.54
FSB Term.voltage = 1.26V
Dram voltage 2.10
NB voltage 1.30
SB voltage = 1.10
s-ata voltage = 1.50

LLC enabled
cpu spread spectrum disabled
pcie spread spectrum disabled
cpu clock skew = AUTO
nb clock skew = AUTO

Disable all options in CPU Configuration meni and set CPU MULTI to 8.

Everything else looks good..

With these settings go for 500MHz FSB it should do it without any problems.
First drop CPU multi to 6x and upp FSB to 500MHz and see if it boots..

If it does and proves stable (run IBT 20runs or P95 LARGE FFT 1h) then go back to BIOS and up your CPU MULTI to 8x and add Vcore enaugh to make it stable for 4GHz..

When you do that test it with Intel Burn Test 20runs with RAM set @ max in that test and if you pass then it's done..

GOOD LUCK..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #673 of 6481
Thanks for the tips, Will give it a go tomorrow because i want some time to stress test properly
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
post #674 of 6481
Man you should hit 4GHz on that chip easy as I've managed to hit 4GHz on my old E6750 back in 2008 without any problems and topped out @533MHz FSB due RAM limit (couldn't go higher tan 1066MHz on my old 800MHz Apacer)..

When you're done with your OC then test it with P95 LARGE FFT test for @ least 6h (I prefer 12h) and if you pass then you're set..

Also test your memory when OC;d @ 500MHz FSB (RAM @ 1000MHz) and with multi @ 6 to make sure that it plays along nicely..
Use memtest Win version 4.0 and run four instances w/ 850MB of dedicated RAM for each and test untill they reach @ least 100% each..

Then upp Vcore and CPU MULTI to 8x and test with IBT 20runs and P95 LARGE FFT 6 - 12h..

GOOD LUCK..

CHEERS
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #675 of 6481
just a comment, if you are gonna push yellow voltages (over 1.3v i believe) on the NB id suggest removing the ASUS sticker on it (not sure if the pro has the sticker, but if it does remove it, it helps with the temps). also you might consider mounting a 40mm on that NB heatsink.
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
post #676 of 6481
Going from 2.66 Ghz to 4Ghz on air...... Sounds like pure win to me.

edit. There is no sticker on my nb cooler fortunately. Temp on the nb is 26c under full load with 1.26v
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
post #677 of 6481
Quote:
Originally Posted by liskawc View Post
just a comment, if you are gonna push yellow voltages (over 1.3v i believe) on the NB id suggest removing the ASUS sticker on it (not sure if the pro has the sticker, but if it does remove it, it helps with the temps). also you might consider mounting a 40mm on that NB heatsink.
No need for that as I run Quad(which stresses NB harder than Dual) and vNB = 1.30V and temp of NB never touches 40C on highest loads..

Pro doesn't have any sticker on NB..

CHEERS..
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
post #678 of 6481
the no sticker on NB, thats great. also temps will become an issue when you are up at 1.32, maybe 1.34 (at least thats where i started to get problems)

also what are you using to check the NB temp?
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
post #679 of 6481
Using Asus Probe. Temps seems consistant with the readings in the bios.
Right now i'm not worried about my temps, core tops 51 degrees under full load after an hour of testing.
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
Rosso Illuminato
(13 items)
 
  
CPUMotherboardGraphicsRAM
X4 955 Asrock 790 4870 1 gb XMS  
Hard DriveOptical DriveOSMonitor
1.5 tb dvd rw 7 premium Samsung Syncmaster T200 
KeyboardPowerCaseMouse
Dell Corsair TX650 Antec 300-R Logitech generic crap 
  hide details  
Reply
post #680 of 6481
Quote:
Originally Posted by KingT View Post
No need for that as I run Quad(which stresses NB harder than Dual) and vNB = 1.30V and temp of NB never touches 40C on highest loads..
500fsb and 1.3v on NB was not stable for me (with 6x multi and vtt between 1.26 and 1.34)

might have a question for you there KingT: if you run HW monitor, and start priming large FFTs, does the circled value on the pic drop for you?
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
HexaCandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon W3680 (ES) Asus P6T Deluxe GigaByte GTX 670 Kingston KHX1600C9D3/4GX 
Hard DriveHard DriveCoolingMonitor
Intel SSD 330 180GB WD Green 3TB x2 EKWB Supreme HF + 240 rad HP ZR2740w 
KeyboardPowerCaseMouse
Steelseries 6Gv2 cheapo 750w (needs replacing) CM 690 II Advanced Razer Deathadder 
Mouse PadAudioOther
Razer Goliathus Asus Xonar Essence STX Speakers: RP 5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › **Official ASUS P5Q PRO Turbo/PRO/Turbo Owners Club** (All ASUS P45 Mobo Owners Welcome!)