[The Official] NZXT Vulcan Owners Club - Page 160

http://www.overclock.net/t/774308/the-official-nzxt-vulcan-owners-club/1520#post_15703134

my guess would be a dremel tool

yes I used a dremel

I think he meant more along the lines of where did you cut it and how did you feed the tubes through.

One would think is all you would need is a small ruler, a bit of patience and a dremel.

Measure where flow tubes would go through top of case by lining up unit and marking with an instrument to score roughly where you want it.
Use ruler to draw in your lines and depth
Use dremel to cut your notches
Put everything back togeather.
Enjoy

Hey guys, I've been away for a while but I wanted to give you my long term experience with the Vulcan so far. For the most part, I love the case, it's very nice to carry around, has great cooling, and has the ability to turn off the LEDs in the fans (which is a must have for running it at night in a bedroom). I have noticed a few things about the case though that I wish they could fix if they ever release a Vulcan 2.0. First is the fan controller, one of the plugs on mine doesn't work so I can only control 3 fans (which luckily isn't a big deal since I run them at full tilt anyway) and it needs a little more power so that is can control the optional side 200mm fan. Second is just to make a case a little bigger overall. A little extra room up top would be perfect for a dual rad, a little wider of case and you'd be able to get 120mm rad in the back location and fit taller cpu coolers, and a little more area behind the motherboard tray would allow me to comfortably fit all of my power cables back there (non modular psu :/) without stuffing it full like a suitcase. Third is they could release it in all of those fancy colors that oems are selling them in. I'm just hoping since they made a revision to their Phantom, that they might do the same for the Vulcan .

In other news, I'm looking at upgrading the CPU cooling for my 2500k in the case. Is it really true that the H80 has shorter tubes than the H50's that everyone has been using? I've read elsewhere that they're actually longer :/ . I have that 120mm fan on the bottom of that case so I'm thinking about mounting it there rather than the "standard" front fan config. Thanks guys!

vulcan users....merry xmas everyone!

.
Edited by nylester - 12/24/11 at 5:29pm

@above My god that is a beautiful case mod.

Hello, everyone I'm new to the forum and I would just like to ask a simple question. Would a H60 fit in the front intake, and if so would I have to take out the harddrive bay in there? I haven't checked inside for a while so I'm a bit off on how it would look. Thank you!

I have seen the h80 mounted easily in the front bay with the HD cage taken out so I'm guessing the h60 would be a breeze.

I'm new to this forum also and very interested in this case. I have two questions before I buy one:

1.I have read reviews that describe the front usb board frying instantly upon powering the unit on. Anyone had this problem? If so, how was dealing with NZXT to address the problem?

2.How can I fit a corsair h100 in the front panel. I have seen it done and I think mounting it on top looks ridiculous and involves sacrificing the handle.


Thanks guys and some great looking builds on here.