post #1 of 1
Thread Starter 
Well, I realized why I had to use my old screws when mounting my motherboard in my C5. I used the screws that are meant to hold CD-ROM drives and other 5.25" devices . So I used the proper screws, and now everything is fine. Took me forever to figure out how to remove the foam around the 80mm in order to wash it. But hey, now it's not as dusty. Also, I plugged my front USB into a different header, as the current one was causing the cable to be awfully close to my VGA cooler. One of these days, I'll need to clean/lap/reseat my heatsink on my CPU, as it is filthy! Also I should consider investing in some case mods. Also discovered that the side panels are identical - just one has a big vent and a CPU duct. If I can find another blank side panel, I wouldn't feel as bad if I screwed up my mod.