Yes. The Silicon Image Mode is disabled. I've been trying to install windows after creating the array from the start of this whole mess.
I'm beginning to think this board is faulty.
I make it to windows setup and hit F6. Then after a bit I receive the following.
Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter. Currently, Setup will load support for the following mass storage devices:
*To specidy additional SCSI adapter, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S.
*If you do not have any device support disks from mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER.
After pressing S, I am prompted to insert a disk into drive A.
I try using the Raid Drivers created on a floppy with the MOBO CD RAID driver Utility.
The disk intitializes and then Windows continues to ask for the disk without successfully loading the drivers.
I'm two seconds away from just installing on a single disk again and going with that!