Overclock.net › Forums › Graphics Cards › NVIDIA › Fermi issues: Low GPU Usage and Bad Company II Stuttering
New Posts  All Forums:Forum Nav:

Fermi issues: Low GPU Usage and Bad Company II Stuttering - Page 7

post #61 of 1638
Have you check the 12v while it was under a load? Software is not good for checking voltage. It need be done with a vom (fluke).
The only other thing you can do w/o a meter is check it in bios. This isn't very accurate as there is no load.
ATX spec a 5% swing.
The low volt cut off is 11.4 However it's been my experience anything below 11.7 you got major trouble.
Also have you tried to change the game .ini file? I'll re read the thread, sry. i'm not sure it will help.
Have you ever edited .ini gamefiles?
c:users/documents/bfbc2/game.ini The .ini should appeAr as a text, right. You can change dx=auto to dx=9 , 10, or 11.
IMHO I have tested it. dx11 is best for me mp mode.
Also you can change renderahead=3 to 0. Have not tested this.

If you want. You can take a pic of your gpu usage. You can tell by looking at it it's f'd (microstutter)
Check your oc software, monitoring polling=100ms.


Quote:
Originally Posted by BradleyW View Post
I put physix on auto and the stuttering and reduced by a lot, however i get a stutteraround every 8 seconds or maybe a bit less.

Edited by DrFPS - 7/30/10 at 7:35am
MyCleanPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS MAXIMUS VI EVGA master blaster Corsair Vengence  
Hard DriveOptical DriveOSMonitor
OCZ SSD raid0 samsung Win 7 Samsung 
PowerCase
Enermax rev 1050 Stacker 832 
  hide details  
Reply
MyCleanPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS MAXIMUS VI EVGA master blaster Corsair Vengence  
Hard DriveOptical DriveOSMonitor
OCZ SSD raid0 samsung Win 7 Samsung 
PowerCase
Enermax rev 1050 Stacker 832 
  hide details  
Reply
post #62 of 1638
Thread Starter 
Ive not checked the 12v however this power supply is brand new with the cards and the PSU is very good quality and reliable plus expensive lol. Ive not edited ini file. I just used that ODoverdrive tool that comes with rivatuner and forced vsync, tripple buffer and put physix on auto, the stuttering is now really less common and much much much better however i get the little odd stuuter here and now.

Now if i face a wall and run sideways whilst looking at the wall, i get no stutter, but if i ran diagnoal whilst facing the wall, i would get 1 mini stutter, it's crazy. At least it's not my hardware and at least the stuttering has almost gone.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #63 of 1638
Because it's new and expensive means nothing. If you have not checked it you don't know! They can fail right out of the box. doo doo happens.
I do agree with you as I doubt it's equipment related. It shouldn't do it all.
Mine don't. It's smooth and fast. dx9 was bad, it had a hitch and textures flashed.
About the only other thing would be to start shutting down all non essential processes.
Quote:
Originally Posted by BradleyW View Post
Ive not checked the 12v however this power supply is brand new with the cards and the PSU is very good quality and reliable plus expensive lol. Ive not edited ini file. I just used that ODoverdrive tool that comes with rivatuner and forced vsync, tripple buffer and put physix on auto, the stuttering is now really less common and much much much better however i get the little odd stuuter here and now.

Now if i face a wall and run sideways whilst looking at the wall, i get no stutter, but if i ran diagnoal whilst facing the wall, i would get 1 mini stutter, it's crazy. At least it's not my hardware and at least the stuttering has almost gone.
MyCleanPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS MAXIMUS VI EVGA master blaster Corsair Vengence  
Hard DriveOptical DriveOSMonitor
OCZ SSD raid0 samsung Win 7 Samsung 
PowerCase
Enermax rev 1050 Stacker 832 
  hide details  
Reply
MyCleanPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS MAXIMUS VI EVGA master blaster Corsair Vengence  
Hard DriveOptical DriveOSMonitor
OCZ SSD raid0 samsung Win 7 Samsung 
PowerCase
Enermax rev 1050 Stacker 832 
  hide details  
Reply
post #64 of 1638
Thread Starter 
Well i used a different PSU and ati 5850 cf and had micro stutter therefor it's gotta be software. However i would like to point out, i can constantly here my hard drives! (My hdd light will not work on the mb. i plugged it in but i get nothing.)
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #65 of 1638
Thread Starter 
Quote:
Originally Posted by DrFPS View Post
Have you check the 12v while it was under a load? Software is not good for checking voltage. It need be done with a vom (fluke).
The only other thing you can do w/o a meter is check it in bios. This isn't very accurate as there is no load.
ATX spec a 5% swing.
The low volt cut off is 11.4 However it's been my experience anything below 11.7 you got major trouble.
Also have you tried to change the game .ini file? I'll re read the thread, sry. i'm not sure it will help.
Have you ever edited .ini gamefiles?
c:users/documents/bfbc2/game.ini The .ini should appeAr as a text, right. You can change dx=auto to dx=9 , 10, or 11.
IMHO I have tested it. dx11 is best for me mp mode.
Also you can change renderahead=3 to 0. Have not tested this.

If you want. You can take a pic of your gpu usage. You can tell by looking at it it's f'd (microstutter)
Check your oc software, monitoring polling=100ms.
I don't have the equipment to test this.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #66 of 1638
Quote:
Originally Posted by BradleyW View Post
I don't have the equipment to test this.
have you tried the 257.15 drivers? they're known to be great drivers for BFBC2
    
CPUMotherboardGraphicsRAM
i7 930 @ 4.13 MSI X58 Pro-E Sapphire HD7970 OC 6GB Corsair XMS3 1600C7 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro 512GB Samsung F3 1TB Crucial M500 480GB Samsung 22x DVDRW 
OSMonitorKeyboardPower
Windows 10 Shimian QH270-Lite Tesoro Durandal Ultimate Antec TPN-750 Blue 
CaseMouseMouse PadAudio
NZXT Phantom White Red Logitech G502 Proteus Func 1030 Asus Xonar Essence STX 
Other
Emotiva Airmotiv 4 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 930 @ 4.13 MSI X58 Pro-E Sapphire HD7970 OC 6GB Corsair XMS3 1600C7 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro 512GB Samsung F3 1TB Crucial M500 480GB Samsung 22x DVDRW 
OSMonitorKeyboardPower
Windows 10 Shimian QH270-Lite Tesoro Durandal Ultimate Antec TPN-750 Blue 
CaseMouseMouse PadAudio
NZXT Phantom White Red Logitech G502 Proteus Func 1030 Asus Xonar Essence STX 
Other
Emotiva Airmotiv 4 
  hide details  
Reply
post #67 of 1638
did anyone ask the question are you running msi afterburner or any oc tools/fan monitoring?
FrEaKNaSty
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 3.8ghz - 3011B106 Gigabyte GA-X58A-UD9 Asus 5850 GSKILL PI 6GB 6-8-6 1T 1600mhz 
Hard DriveOSMonitorPower
OCZ Vertex 2 SSD 50gb & F3 500gb Windows 7 Professional 64bit Asus MS238H LED LCD Silverstone ST1500W 
CaseMouseMouse Pad
Coolermaster HAF X Logitech MX518 Icemat 
  hide details  
Reply
FrEaKNaSty
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 930 @ 3.8ghz - 3011B106 Gigabyte GA-X58A-UD9 Asus 5850 GSKILL PI 6GB 6-8-6 1T 1600mhz 
Hard DriveOSMonitorPower
OCZ Vertex 2 SSD 50gb & F3 500gb Windows 7 Professional 64bit Asus MS238H LED LCD Silverstone ST1500W 
CaseMouseMouse Pad
Coolermaster HAF X Logitech MX518 Icemat 
  hide details  
Reply
post #68 of 1638
Thread Starter 
Quote:
Originally Posted by h220wnzj00 View Post
have you tried the 257.15 drivers? they're known to be great drivers for BFBC2
Not tried them. Link please? Am using win7 64bit again btw.

Quote:
Originally Posted by ryman546 View Post
did anyone ask the question are you running msi afterburner or any oc tools/fan monitoring?
Nothing on my system like that.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #69 of 1638
Thread Starter 
Quote:
Originally Posted by h220wnzj00 View Post
have you tried the 257.15 drivers? they're known to be great drivers for BFBC2
How old is this driver? Does it support GTX470 SLI?
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #70 of 1638
http://www.nvidia.com/object/win7-wi...7.15-beta.html



It should support 470 sli yea
    
CPUMotherboardGraphicsRAM
i7 930 @ 4.13 MSI X58 Pro-E Sapphire HD7970 OC 6GB Corsair XMS3 1600C7 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro 512GB Samsung F3 1TB Crucial M500 480GB Samsung 22x DVDRW 
OSMonitorKeyboardPower
Windows 10 Shimian QH270-Lite Tesoro Durandal Ultimate Antec TPN-750 Blue 
CaseMouseMouse PadAudio
NZXT Phantom White Red Logitech G502 Proteus Func 1030 Asus Xonar Essence STX 
Other
Emotiva Airmotiv 4 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 930 @ 4.13 MSI X58 Pro-E Sapphire HD7970 OC 6GB Corsair XMS3 1600C7 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro 512GB Samsung F3 1TB Crucial M500 480GB Samsung 22x DVDRW 
OSMonitorKeyboardPower
Windows 10 Shimian QH270-Lite Tesoro Durandal Ultimate Antec TPN-750 Blue 
CaseMouseMouse PadAudio
NZXT Phantom White Red Logitech G502 Proteus Func 1030 Asus Xonar Essence STX 
Other
Emotiva Airmotiv 4 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Fermi issues: Low GPU Usage and Bad Company II Stuttering