Originally Posted by h220wnzj00
What voltage have you tried up to so far?
I have it cranked to the max that MSI afterburner will allow (and I'm using the stock MSI gtx 470 bios) of 1.87volts
Originally Posted by NCspecV81
Guys, there doesn't need to be another guide on unlocking. This card unlocks no different than the POV's or the PNY's.
If you have trouble unlocking you are more than likely doing something wrong.
I don't mean to try and out do what everyone else has done, I just mean to clean it up a little. Like the part about making the USB bootable drive. It makes it seem like the HP tool should copy over a ton of files AND the autoexec.bat file -- however, it only copies 3 files. This is actually what it is supposed to do, but none of the guides make that clear. So everyone gets stuck at that part until they decide to just try it anyway.
What the guide should say is: after the USB stick has been made, and the 3 files are copied to it, go back into the original folder and copy/paste the rest of the files to the USB stick (and DON'T overwrite the files you just created, skip copying those) -- THEN edit the autoexec.bat file that you just copied to your USB flash drive.
Also, make sure your thumb drive is plugged in when you try to enable it to boot under your PC's Bios. (that should go without saying... but you never know)
so a guide with added parts to it. Maybe it can even just be little "edits" to the guide that already exists.