Overclock.net › Forums › Cooling › Water Cooling › ...::: The H50 / H60 / H70 / H80 / H90 / H100 Mod Club :::... [UPDATED]
New Posts  All Forums:Forum Nav:

...::: The H50 / H60 / H70 / H80 / H90 / H100 Mod Club :::... [UPDATED] - Page 22

post #211 of 262
Thread Starter 
damn editing still wont work ony my FF..
anyway, here is how i began in another thread
http://www.overclock.net/t/771130/yep-another-h50-mod-prototype-watcha-say

GL
post #212 of 262
Well i will chime in, dod an h60/h50 dual loop mod over the weekend.

the original setup(well really this is v2.1)
uvE7R.jpg
DByKh.jpg

now the leak down test of v2.2

CxnjF.jpg
f8Lwi.jpg
post #213 of 262
Thread Starter 
now this is fancy biggrin.gif
post #214 of 262
Using Feser blue fluid load temps @ 50c idle temps 16c @ 78f thumb.gif Using blackice 120mm rad
Intels D.C.
(14 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i-7 4790K 4.8Ghz core 1.263v, 4.4Ghz V.ri... MSI Z97 Gaming 9 AC XFX R9 290 1050core 1350ram XFX R9 290 1050core 1350ram 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT 4x4GB 2133Mhz OC to 2400M... Western Digital Black Sata iii Western Digital Green Sata iii Intell power Corsair GS sata iii SSD 180 GB 
Optical DriveOptical DriveCoolingOS
Lg CD/DVD Burner internal Drive Lg CD/DVD Burner external drive  Coolgate 360 Rad 60mm, Coolgate 240 Rad 60mm, K... Windows 7 64Bit Ultimate 
PowerCase
Corsair AX1200i Sleeved NZXT Switch 810/ 11 Corsair sp120 high flow fan... 
  hide details  
Reply
Intels D.C.
(14 items)
 
  
CPUMotherboardGraphicsGraphics
Intel i-7 4790K 4.8Ghz core 1.263v, 4.4Ghz V.ri... MSI Z97 Gaming 9 AC XFX R9 290 1050core 1350ram XFX R9 290 1050core 1350ram 
RAMHard DriveHard DriveHard Drive
Corsair Dominator GT 4x4GB 2133Mhz OC to 2400M... Western Digital Black Sata iii Western Digital Green Sata iii Intell power Corsair GS sata iii SSD 180 GB 
Optical DriveOptical DriveCoolingOS
Lg CD/DVD Burner internal Drive Lg CD/DVD Burner external drive  Coolgate 360 Rad 60mm, Coolgate 240 Rad 60mm, K... Windows 7 64Bit Ultimate 
PowerCase
Corsair AX1200i Sleeved NZXT Switch 810/ 11 Corsair sp120 high flow fan... 
  hide details  
Reply
post #215 of 262
Sorry if I'm in the wrong place for this kind of cooler mod I didnt see any for the Seidon 120m this is my rig...


I used Feser One coolant and an xspc 5.25 single bay res 1/4 tubing/barbs
post #216 of 262
Thread Starter 
you´re both right here.. welcome
post #217 of 262

Went with a T-line rather than a reservoir. I've lapped both heat sink and cpu. I originally was using the clear blue 6/8mm tubing but that was collapsing so I switched to 6/10mm tubing. Using a pair of Ty-140 fans had to hack one a little bit so the hose could be clipped in place on the radiator barbs don't trust just the barbs themselves.

I'm running a fx-6300 @ 4400 on 1.4v and hitting around 45 degrees on full load. It could be prettier and I'm not really happy with the pump being so high compared to everything else but I going to upgrade to a full w/c system with my new build so I don't really care.
post #218 of 262
Okay got a new motherboard so while I was replacing it I repositioned the the H70.




If you want to see how I did it I've done a small work log in this post here
post #219 of 262
is there a way to use these as the pump, heat exchanger and gpu block in a volenti loop?
post #220 of 262
Hello Friend, I can say that I unscrew screws to access the pump unit H50. regards
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › ...::: The H50 / H60 / H70 / H80 / H90 / H100 Mod Club :::... [UPDATED]