Ok, long day, everything up and running. Ecstatic with idle temps across the board. CPU cores, 27-29 on real temp. And best of all, All three GPU temps at 29-31 at idle! THe fermi beast get cooled
Couple of small thing, like a dork, I forgot to order a card reader. So, im going to go to Best buy and get an external till i can get one ordered. Also, I used the 256 Corsair SSD from my old dell, and the BIOS is not picking up my WD SATA 3 Drive, nor my Merc Series Keyboard or Razr Mamba. Had to grab some old usb crap I had laying around to type this. Sure its a driver thing for KB and mouse, and I have heard the Marvell or whatever driver runs the 6gps ports can be balky. Goijng to clear up that crap, then get some baseline stock temps, and benches run.
More detailed thanks later, but without Pascal, Mas and severala
others this would have been a lot harder. And yes, BTW, I am working off the new rig to post this.
Thank again guys for help. More to follow later
Update: Stock 3d Vantage: 37102
CPU Score: 71988
GPU Score:31942 (Seems low, need to check SLI Settings.
MAX CPU temp during Vantage: 41 Degrees
MAX GPU TEMP 44 degrees.
3d Mark 06: 24595
OK, disregard all above stock benchmarks. While moving rig from my workbench to where it will live, one of the GTX 480s loosened enough to show up in control panel, but not as SLI capable in NVIDIA control. It was defaulting to being a dedicated PHYSX card! Once I reseated it, it then was enabled to TRI SLI. BRB, going to rerun those.
Ok, much better:
Stock, 3d Mark Vantage: 44287
GPU Score: 39530
CPU Score: 71021
Stock, 3d Mark 06 24259 (strange almost no change there.)
Stock, PC Mark Vantage: 16,424 (Highest CPU Temp 42, GPU 43
Stock Heaven: (See screen cap)As you can see, pretty respectable with all settings maxed 2560 by 1600. The Min 3 FPS, was right at the beggining. Anyone have any ideas on what would cause that? CPU bottleneck, me thinks.
Dirt 2: Forget it, crappy port, cant get out of watching stupid intro, controls are joypad only I guess, not going to happen right now.
Stock Cinebench: CPU: 8.04 points
Open GL: 42 FPS
Stock Furmark: See screen cap
Going to run Batman too, any other benches anyone would like to see? Once I have this baseline, Im am going to start OClocking.
BTW, updated drivers and mouse, KB and SATA 3 HD all working now.Edited by RacWisco - 9/5/10 at 8:50pm