Quote:
Originally Posted by overclockerjames
Ok I did my research and apparently painting your motherboard and ram and video card works sometimes
Didn't work for this guy
http://forums.bit-tech.net/showpost....3&postcount=94
it did work for this guy but the paint melted off hot parts of the motherboard
http://forums.bit-tech.net/showpost....&postcount=145
I'd also like to point out that in every example I could find the modders covered ports (IDE, SATA, etc) and slots (RAM, PCI, etc) before painting. I could not find one example where someone painted over their SATA ports and RAM/PCI slots like in this thread.
I'm subscribing, I want to see what happens, I'll be shocked if it works  |
Then you'll just have to continue searching, I didn't paint any pins or other places that needs to be conductive.
The paint itself not conductive, the chips was covered, and are water cooled. If there is any heat output it will most likely travel to the open places, which are covered with water blocks.
It also withstands heat, and does not start to smell when getting warm.
I know this since I've built 3 motorbikes featuring this paint..
I can post a worklog of me exchanging a HD5450 for a HD5650 in a HP OEM computer if this is too extreme for ya.
Thanks all, I'll put something new up in here soon.
