Originally Posted by crappy_head
ok this is what i did and it failed.
put my hammer fid to 7x
put my mem on 166
and up the vdd to 1.6 and
up the FSB 10 mhz
and my system wouldent show on the screen so i had to use the jummper things on the mobo to reset the mobo
What is hammer fid to 7x?
Set your bios to default settings, and leave voltages at stock. Set your memory to 166 like you did and increase your HTT(FSB) to what you tried before.
Remember what I said do, one adjustment at a time. As you increase your processor frequency and start to become unstable, then increase you VCore incrementally. Until you reach the point of unstability do not mess with the VCore.
Edit: What type/brand of PSU is that? Only 350 Watt PSU with your setup may be suspect, may not be enough juice. What type of voltages do you have on your rails? +12v should be +12 volts (ie 12.23 volts), +5v should be +5 volts (ie 5.14 volts), -5v should be -5 volts and so on. How many amps does your PSU spec for on the +12v rail? 30 amps and above is preferable, if less then 20 amps it will imit your overclock.