I lowered my multi to 9 so I am using 500x9 = 4.5. on my e8600. So that I can use a higher fsb..
You could go higher on the nb then you could on the fsb with this chips...I have to take a look in my bios to see what settings am using..
It should hold 4.4Ghz easily at 1.4vcore. Then he needs to fire up that SMP client to keep from falling behind. All right. Let's GO JBC!
EDIT: By the way. I just use "auto" for most of those voltages. They might be a little high. But at least it stays stable.
Edited by JadeMiner - 6/8/09 at 4:12pm