Overclock.net › Forums › AMD › AMD CPUs › 3200 help ocing (pics inside)
New Posts  All Forums:Forum Nav:

3200 help ocing (pics inside)

post #1 of 18
Thread Starter 
what am i doing wrong? the changes i made to the bios are in the pics. then when i save them and restart i get what you see in the last pic. that conferms the OC but then windows wont start and it just keeps restarting. any suggestions? what am i doing worng? thanx




My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
post #2 of 18
Why is your memory running at 166. Thats way too low. What brand do you have? Voltage might be an issue to.
FX Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320e Gigabyte GA-970A-UD3P Sapphire R9 380 4GB 2x8GB Crucial Ballistix DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Intel 240GB SSD HGST 4TB Storage DVD-RW Cooler Master Hyper 212 EVO 
OSMonitorPowerCase
Windows 7 x64 AOC 27" 1080p Corsair CX750m Corsair 200R 
Audio
Asus Xonar DS 
  hide details  
Reply
FX Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320e Gigabyte GA-970A-UD3P Sapphire R9 380 4GB 2x8GB Crucial Ballistix DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Intel 240GB SSD HGST 4TB Storage DVD-RW Cooler Master Hyper 212 EVO 
OSMonitorPowerCase
Windows 7 x64 AOC 27" 1080p Corsair CX750m Corsair 200R 
Audio
Asus Xonar DS 
  hide details  
Reply
post #3 of 18
Thread Starter 
that what ppl on this board says to change it to. it normaly runs at 200mhz but i lowered it to 166mhz. whats wrong with my volts?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
post #4 of 18
get the ram speed up towards 200Mhz and i would leave the voltages for the moment. thats all i can suggest doing as my 3200 went to 2.6Ghz on stock vcore and vdimm. it could be the ram holding it back
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
post #5 of 18
Thread Starter 
so i should leave my ram on 200mhz? and leave my voltz on default? here is my ram info from everst

FieldValue
Memory Module Properties
Module NameG Skill NS
Serial NumberNone
Module Size1024 MB (2 ranks, 4 banks)
Module TypeUnbuffered
Memory TypeDDR SDRAM
Memory SpeedPC3200 (200 MHz)
Module Width64 bit
Module VoltageSSTL 2.5
Error Detection MethodNone
Refresh RateReduced (7.8 us), Self-Refresh

Memory Timings
@ 200 MHz2.5-3-3-6 (CL-RCD-RP-RAS)

Memory Module Features
Early RAS# PrechargeNot Supported
Auto-PrechargeNot Supported
Precharge AllNot Supported
Write1/Read BurstNot Supported
Buffered Address/Control InputsNot Supported
Registered Address/Control InputsNot Supported
On-Card PLL (Clock)Not Supported
Buffered DQMB InputsNot Supported
Registered DQMB InputsNot Supported
Differential Clock InputSupported
Redundant Row AddressNot Supported

Memory Module Manufacturer
Company NameGSkill International Enterprise
Product Informationhttp://www.gskill.com/products.html
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
post #6 of 18
You could also try upping the memory timings a bit, say 2.5 4 4 8, see if you get more stability that way, or 3 4 4 8, and go up. after that when you find your plateau for the cpu, you can bring the timings back down and see where they stabilize
Minotaur
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core I5 2500K MSI P67A-GD53 2 X EVGA GTX 460 SLI G.Skill RIPJAWS 2*4Gb 1.3Ghz 
Hard DriveOptical DriveOSMonitor
WD: 2*500GB Raid0 + 2*2TB 2*DVD RW Optiarc+Samsung Windows 7 64-bit 24" ACER Widescreen HD 
KeyboardPowerCaseMouse
Microsoft Ergonomic 4000 Corsair HX620 Coolermaster HAF932 Advanced Ocz equalizer 
Mouse Pad
RatPadz GS 
  hide details  
Reply
Minotaur
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core I5 2500K MSI P67A-GD53 2 X EVGA GTX 460 SLI G.Skill RIPJAWS 2*4Gb 1.3Ghz 
Hard DriveOptical DriveOSMonitor
WD: 2*500GB Raid0 + 2*2TB 2*DVD RW Optiarc+Samsung Windows 7 64-bit 24" ACER Widescreen HD 
KeyboardPowerCaseMouse
Microsoft Ergonomic 4000 Corsair HX620 Coolermaster HAF932 Advanced Ocz equalizer 
Mouse Pad
RatPadz GS 
  hide details  
Reply
post #7 of 18
try leaving your ram on 200Mhz and on stock volts

then try starting it, if that doesnt work either try 1.55vcore on your cpu or run memtest86 to see if your ram is ok
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
post #8 of 18
Thread Starter 
how do i up the memory timming?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
post #9 of 18
in your second pic in your first post, you could change the CAS latency to 3, but those timings look good at the moment

my G.skill timings are 2.5-4-4-8 so i dont really think you should need to change them yet, maybe not at all
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
Wingman Fuzzi
(16 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.6GHz 1.37v Gigabyte Z68X-UD5-B3 Zotac GTX 680 @ 1215/3005MHz (347.09) 2x8GB Kingston HyperX Savage 1866Mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 120GB + 850 1TB + Intel 520 240GB Samsung F3 1TB Thermalright Venomous X w/ FM122 Windows 7 Pro x64 
MonitorKeyboardPowerCase
Dell U2312HM 1920x1080 @ 60Hz Ducky Shine II (Blues w/ White Backlight) Corsair HX 620W Fractal Design XL (Black Pearl) 
MouseMouse PadAudioAudio
MX518 Steelseries QcK+ Creative X-FI Xtreme Music Sennheiser HD598 
  hide details  
Reply
post #10 of 18
Thread Starter 
thanx for the help. ok well im getting somewhere now. i left the ram at 200 ant the voltz on default and now im at 2200mhz. but now my memroy frequency is at 220mhz. is that ok? what should i do next? keep upping the cpu frequency? run prime 95 or something like that?
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardOSMonitor
AMD athlon 3200+ 64bit bfg nforce 4 ultra Windows xp pro 19" LCD 
Power
Sunbeam NUUO 550W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › 3200 help ocing (pics inside)