Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Corsair Graphite Club [780T/760T/730T/600T/380T/230T]
New Posts  All Forums:Forum Nav:

[Official] Corsair Graphite Club [780T/760T/730T/600T/380T/230T] - Page 523

post #5221 of 18196
Quote:
Originally Posted by Mergatroid View Post

That's another pretty amazing build you have there. Did you offset the upper rad to achieve push/pull? Really nice job on the front 200mm rad. You put a lot of stuff in there and it still managed to look roomy. Nice job.
Nice job. It's looking good. Is that a 1m NZXT LED strip? The H100 sure fits nice in the 600T. Almost like it was made for it.
Good question. Why not try it both ways and let us know the difference between the two? Take some before and after temps for us? Remember that if you do use the rear fan as intake you could be pulling in a lot of dust with no filter. I think it would be worth a try though.
I don't know what the air flow is like in your Storm Scout case, but the airflow in the 600T is a solid medium with the side window and a solid pretty-darn-good with the side mesh and fans. It's not a high air flow case if you're not using the mesh. I'm using the window, but I have added another 120mm intake fan and a high airflow 200mm front fan. Using 4 x 120mm fans on the side panel mesh should keep your NH-D14 working cool. You might want a dust filter though.
Wow, that really sucks dude. Half the fun is seeing all the pictures going down the page. I agree that reposting an entire series of pictures is going too far, but reposting a picture relevant to your point, or to a complement is part of what makes the site fun. Seeing this I had to go up and remove the pictures. Personally, I never bother clicking on the hidden text links.
No, mounting a fan there in the picture I can't show without a link is not allowed. It's illegal and the fan cops will get you. Seriously, let us know what the temp difference on your video card is after you mount the fan. Looks like it could be a good idea.
YOU are in bug trouble, buddy. You reposted a picture! That's it, hand in your membership card and hit the road.
Does your video card pull air in at the bottom or exhaust it? If it pulls air in, then your fan should have been OK if it was pushing air up. What direction was the airflow on the fan?

Thanks for the reply Mergatroid. The Scout's airflow is fairly good. I added a second 140mm intake fan to the front and it really added a lot of airflow to the case. I'm really just more concerned for the 6950 crossfire I have set up as I'd love to use the window more than the mesh but if I have to use it I will. I will more than likely add a 120mm fan to the front when I buy this case before I try the mesh as the window looks fantastic. I can't find anything that does it for me like this case even though there are more functional cases at this price point or cheaper. Right now Canada Computers has it on sale until the 29th for $145 and there's one in stock at the location by my work. So anyone, especially Canadians, that don't own this case and see this post who are looking to purchase one like me should definitely check out their site as it's a great deal. I don't know what their shipping is like though as I've never dealt with them.
http://www.canadacomputers.com/product_info.php?cPath=6_112&item_id=036486
The Fortress
(17 items)
 
Black Mamba
(14 items)
 
The Black Pearl
(25 items)
 
CPUMotherboardGraphicsRAM
Intel Core i3 4130 Gigabyte B85M-D3H Sapphire HD6950 1GB 8 GB of Corsair Vengeance lp  
Hard DriveCoolingOSMonitor
Samsung 840 Evo 120GB Intel Stock Cooler Windows 8.1 64 Bit LG 24EN43VS-B 
KeyboardPowerCaseMouse
Logitech K350 Seasonic G-Series 550W  Silverstone PS07B Logitech M510 
Mouse PadAudio
Corsair MM200 Compact Harmon Kardon 2.1 Audio 
  hide details  
Reply
The Fortress
(17 items)
 
Black Mamba
(14 items)
 
The Black Pearl
(25 items)
 
CPUMotherboardGraphicsRAM
Intel Core i3 4130 Gigabyte B85M-D3H Sapphire HD6950 1GB 8 GB of Corsair Vengeance lp  
Hard DriveCoolingOSMonitor
Samsung 840 Evo 120GB Intel Stock Cooler Windows 8.1 64 Bit LG 24EN43VS-B 
KeyboardPowerCaseMouse
Logitech K350 Seasonic G-Series 550W  Silverstone PS07B Logitech M510 
Mouse PadAudio
Corsair MM200 Compact Harmon Kardon 2.1 Audio 
  hide details  
Reply
post #5222 of 18196
Thread Starter 


 

Quote:
Originally Posted by Mergatroid View Post


Wow, that really sucks dude. Half the fun is seeing all the pictures going down the page. I agree that reposting an entire series of pictures is going too far, but reposting a picture relevant to your point, or to a complement is part of what makes the site fun. Seeing this I had to go up and remove the pictures. Personally, I never bother clicking on the hidden text links.

I guess one or two pics are alright. I just don't see the need to repost several pics beyond the initial post. I'll adjust the rules a bit.

Turbo Chicken
(30 items)
 
HTPC
(15 items)
 
Server
(18 items)
 
  hide details  
Reply
Turbo Chicken
(30 items)
 
HTPC
(15 items)
 
Server
(18 items)
 
  hide details  
Reply
post #5223 of 18196
Quick snapshot. 90% done with this build, I want to add an H100 soon and change out the fans. How are the NZXT 200mm fans?

448
post #5224 of 18196
I absolutely adore this forum and big ups to OP, how often do we explore the net for answers aand just get fed up with trolls trollin'. I think this is a great community and im very pleased to be apart of it thumb.gif I guess that the corsair 600t is for people with a certain class biggrin.gif im still trying to recover from the geek porn that is POTO's new case. inspiring
post #5225 of 18196
inspired i thought id do some changes, also some of the sleeved cables arived( eventually) biggrin.gif399399399

just waiting for the front panel connecter sleeves and red replacement sticker for power supply. Excited
post #5226 of 18196
Quote:
Originally Posted by coreupted View Post

Hi,
Could i be added please
Saw an advert on Gumtree for a Corsair 600T SE for £60 and all that was missing was the top mesh panel.
I phoned the guy up and went to his house to see it and all that was missing was said top mesh panel and manual, everything else was there.
There were a couple os small scratches so i said to him id give him £50 and he accepted..
359359700359
For some reason there was an extra front mesh panel..
Ive contacted Corsair to see about the top panel
cheers

Hello

Just got an email from Corsair and after abit of tooing and frowing they are sending me the top panel mesh with no cost to me...
Amazing service..

cheers
coreupted
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k Asrock Extreme 4 z77 powercolor pcs+ 6870 samsung green 
Hard DriveCoolingOSMonitor
Crucial m4 ssd Xigmatek Aegir Windows 7 64 Ferguson HD 
KeyboardPowerCaseMouse
Ducky G2 Pro Be Quiet Dark Power Pro 10 550w Corsair 600T SE RAT 3 v2 
Other
Lamptron FC-2 Fan Controller 
  hide details  
Reply
coreupted
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500k Asrock Extreme 4 z77 powercolor pcs+ 6870 samsung green 
Hard DriveCoolingOSMonitor
Crucial m4 ssd Xigmatek Aegir Windows 7 64 Ferguson HD 
KeyboardPowerCaseMouse
Ducky G2 Pro Be Quiet Dark Power Pro 10 550w Corsair 600T SE RAT 3 v2 
Other
Lamptron FC-2 Fan Controller 
  hide details  
Reply
post #5227 of 18196
Quote:
Originally Posted by POTO View Post

Vercomtech,
Yes, I have 5 Male G1/4 connectors in the system. Two are on the CPU block, two are on the GPU block, and one is on the front radiator. The way I have my system setup I can remove almost every component individually. I can disconnect the graphics cards and remove them as one assembly. I can disconnect just the CPU block and remove it. I can disconnect just the top radiator and remove it (And I’ve already had to do this on a few occasions). I can disconnect just the reservoir and remove it. However, the pump and front radiator are not connected by a disconnect and must be removed together. I worked on this setup for about two weeks before getting it just right, and now it's very efficient for dissambly. I highly recommend the Koolance quick disconnects. They are super easy, and let very very little water escape when disconnecting (not even enough to form a drop). I was a little worried they would restrict the flow with so many in my setup, but my flow seems very good in my system, and with my CPU oc'd to 4.8GHz at 1.35v and my 3 GPU's oc'd to 900 MHz at 1.1v my temps are maxed around 65C for the CPU and 50C for the GPU's.

Wow that is a fantastic setup. I've seen the quick disconnects used in many other builds, and I'm going to use one myself in the current build I'm doing. But never have I seen it executed so well, it shows that you really put a lot of thought into the loop, it looks great and the functionality is superb. Bravo sir! thumb.gif
post #5228 of 18196
He has definitely inspired me to use them - although, it is with sad news that I will eventually be moving everything into a 650D and giving my 600T to my son frown.gif

But I guess I could still post a couple of pics wink.gif
 
TUF-Tactical
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 2600k ASUS Maximus IV Extreme-Z ASUS MATRIX GTX580 Corsair Dominator GT 
Hard DriveOptical DriveOSPower
Corsair GT SSD 120 External - "Need my space" Windows 7 Professional x64 Corsair Professional AX1200 
Case
Corsair Graphite 600T 
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS SaberTooth P67 ASUS GeForce 560ti 16 GB Corsair Vengeance 
Hard DriveOptical DriveCoolingOS
1TB 7200 RPM Hitachi SATA-2 Sony DVD-RW CoolerMaster Hyper N520 Windows 7 Professional x64 
PowerCase
SeaSonic 660X CoolerMaster Storm Scout 
  hide details  
Reply
 
TUF-Tactical
(14 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 2600k ASUS Maximus IV Extreme-Z ASUS MATRIX GTX580 Corsair Dominator GT 
Hard DriveOptical DriveOSPower
Corsair GT SSD 120 External - "Need my space" Windows 7 Professional x64 Corsair Professional AX1200 
Case
Corsair Graphite 600T 
CPUMotherboardGraphicsRAM
Core i7 2600K ASUS SaberTooth P67 ASUS GeForce 560ti 16 GB Corsair Vengeance 
Hard DriveOptical DriveCoolingOS
1TB 7200 RPM Hitachi SATA-2 Sony DVD-RW CoolerMaster Hyper N520 Windows 7 Professional x64 
PowerCase
SeaSonic 660X CoolerMaster Storm Scout 
  hide details  
Reply
post #5229 of 18196
Quote:
Originally Posted by Mergatroid View Post

Does your video card pull air in at the bottom or exhaust it? If it pulls air in, then your fan should have been OK if it was pushing air up. What direction was the airflow on the fan?

Yeah, it pulls air in. I think the way I had it set, the fan was pushing air from right to left and it was passing by the card. Minecraft's main menu had my card see 80* which is the first time that's ever happened.
post #5230 of 18196
Wow, absolutely amazing builds guys! Makes mine look like crap! I just spent $1,000 bucks of savings to build the junk machine I have now frown.gif Sucks being 20 and not being able to create monster machines because of income issues... However, once I get my degree I am going to go all out. This forum has given me so many ideas on what I want to do, and I think this case is perfect for expanding your needs as a computer engineer.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Corsair Graphite Club [780T/760T/730T/600T/380T/230T]