unfortunately I didn't take pictures of the process but I can tell you the rad is held really well. The two fans furthest from the front panel are the ones that are really holding it down, and I think those 8 screws are more than enough. I had to cut away some plastic and metal for the third fan, so its not holding the rad up because there nothing in between to bolt through. That's the only way I could get the third fan to line up flush with the other fans and the rad mounting holes.
post #2961 of 10563
9/3/11 at 8:39am


























. My temps are good, this would be purely for bonus points. I actually have a very quiet set up now. I can't say it's silent, because to me silence would mean you can't tell if the computer is on. You can hear the fans, but just barely, there has to be total silence around you to catch it. If anything else is making noise like the television or having conversation, you can't hear it. I have played Deus ex for hours with Eyefinity, and even at a near silent fan level the GPU cards barley hit 50 Degrees. For stress testing I would need to turn the fans up, but that's the only time........ and this is before the second pump sitting on my desk is installed (also PWM controlled so hopefully no noise penalty with enhanced flow rate.).


