Originally Posted by metalkobra
try and see if your mobo has any of these settings:
2.5-2.7V; HTT=3; FSB=250
Dram Frequency Set: 200 (1:1)
Command Per Clock: Enable (1t)
Dram Bank Interleave: Enable
Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7 (or Best Value For Your System)
Darm Date Drive Strength: 3 (or Best Value For Your System)
Max Async Latency: 7~8ns
Darm Response: Normal
Read Preamble Time: 5ns
Idlecycle Limit: 256
Dynamic Counter: Enable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable
then try going past 250 in 1t
. of course mine isnt exactly that...i honestly dont care about benchmark stable, heck if i can play a game for a while and not crash im good.
I just got CAS, TRAS, TRP, TRCD, interleave, Command rate and one other setting...can't rememeber it at the moment and of corse the divider, voltage, and fsb. That's all I got for memory settings and I think that is better than a lot boards so I really can't complain. DFI's just let you go into deeper detail with every thing. I would have bought one but this one came free with the vid card *shrug* and it works well enough.
At 260 I have found I can still set my HTT to 4X and run stable but any thing higher than that I don't even bother trying above 3X.
But besides the HTT and the 2T...the settings that I have are set to what you posted. No matter how loose I set the timings or how slow I set the fsb...I can not get it to post and load windows in 1T. Some time it will post but it will lock up while loading windows. Not a huge issue though really. I just hope the memory controler on my CPU is OK.