Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Fractal Design Case Club
New Posts  All Forums:Forum Nav:

[Official] Fractal Design Case Club - Page 675

post #6741 of 16068
Quote:
Originally Posted by DJKAY View Post

Core 1000 gets a USB 3.0 in the front thumb.gif

Just saw it and thought it would be interesting for someone who is going to buy a Core 1K.

Click

 

Thanks for the photo. smile.gif

 

IMHO Fractal Design was quite foolish in not having them both USB 3.0 and include a USB 3.0 to USB 2.0 adapter for those who have mobo's that don't have USB 3.0 mobo header(s).

 

Just half-done to me like their R4 that doesn't have an independent HDD led.


Edited by nickt1862 - 3/7/13 at 4:09pm
post #6742 of 16068
I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
post #6743 of 16068
Didn't get a reply for my previous question, so I'll ask again.

Would the Midi R2 window fit on the original Midi?
post #6744 of 16068
Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.

post #6745 of 16068
Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.


No offence at all, I wish it was something stupid that I didn't do or forgot to do but I've tried everything. It's all leading to either broken hardware or the front panel is not working. Considering I had a working comp a few hours ago, I doubt any hardware is broke.

tappin from the Note II
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
post #6746 of 16068
Quote:
Originally Posted by athlon 64 View Post

One more question, can you screw an ssd in an r4 somewhere outside of the hdd cage and not in the back of the MBO tray.
Like when you take of hdd cage entirely, can you screw the ssd upside down on the bottom of 5.25 cages?
u can do what i did with Velcro to my SSD
First
(12 items)
 
  
CPUMotherboardRAMHard Drive
Intel 3570k Asrock Extreme4 G.skill RipJaws X 2133 cl11 Kingston HyperX 3K  
CoolingOSMonitorKeyboard
Corsair h60 Windows 7 HP x2301 Razer Arctosa 
PowerCaseMouseMouse Pad
Seasonic x650 Fractal Design Define R4  Logitech Anywhere MX Crystal Desk 
  hide details  
Reply
First
(12 items)
 
  
CPUMotherboardRAMHard Drive
Intel 3570k Asrock Extreme4 G.skill RipJaws X 2133 cl11 Kingston HyperX 3K  
CoolingOSMonitorKeyboard
Corsair h60 Windows 7 HP x2301 Razer Arctosa 
PowerCaseMouseMouse Pad
Seasonic x650 Fractal Design Define R4  Logitech Anywhere MX Crystal Desk 
  hide details  
Reply
post #6747 of 16068
Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.


No offence at all, I wish it was something stupid that I didn't do or forgot to do but I've tried everything. It's all leading to either broken hardware or the front panel is not working. Considering I had a working comp a few hours ago, I doubt any hardware is broke.

tappin from the Note II

Ideas if you wish to pursue:

 

Check the PSU 24 pin and CPU 4/6/8 pin that it's plugged in well.

 

If so and it doesn't "fire up" take the old case power switch plug and plug it into the mobo of course the two cases would be next to each other - you'll then may find out if it's a faulty power switch on the Fractal case.

 

Did you place the mobo standoffs in the correct place and not extra ones in that one of them can touch the backside of the mobo hence shorting it out?

post #6748 of 16068
Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.


No offence at all, I wish it was something stupid that I didn't do or forgot to do but I've tried everything. It's all leading to either broken hardware or the front panel is not working. Considering I had a working comp a few hours ago, I doubt any hardware is broke.

tappin from the Note II

Ideas if you wish to pursue:

 

Check the PSU 24 pin and CPU 4/6/8 pin that it's plugged in well.

 

If so and it doesn't "fire up" take the old case power switch plug and plug it into the mobo of course the two cases would be next to each other - you'll then may find out if it's a faulty power switch on the Fractal case.

 

Did you place the mobo standoffs in the correct place and not extra ones in that one of them can touch the backside of the mobo hence shorting it out?


I'm fixing to pull the old case out in a min, I did installed all the standoffs in the correct place.

tappin from the Note II
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
post #6749 of 16068
Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.


No offence at all, I wish it was something stupid that I didn't do or forgot to do but I've tried everything. It's all leading to either broken hardware or the front panel is not working. Considering I had a working comp a few hours ago, I doubt any hardware is broke.

tappin from the Note II

Ideas if you wish to pursue:

 

Check the PSU 24 pin and CPU 4/6/8 pin that it's plugged in well.

 

If so and it doesn't "fire up" take the old case power switch plug and plug it into the mobo of course the two cases would be next to each other - you'll then may find out if it's a faulty power switch on the Fractal case.

 

Did you place the mobo standoffs in the correct place and not extra ones in that one of them can touch the backside of the mobo hence shorting it out?


I'm fixing to pull the old case out in a min, I did installed all the standoffs in the correct place.

tappin from the Note II

Process of elimination and luckily in having your old case may answer a question or two.

 

Take your time and please let us know at your convenience.

 

EDIT: Another "stupid" thing to check: the PSU power switch in the rear if it's in the "ON" position.  Nothing is a stupid suggestion though IMHO. smile.gif


Edited by nickt1862 - 3/7/13 at 7:45pm
post #6750 of 16068
Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

Quote:
Originally Posted by nickt1862 View Post

Quote:
Originally Posted by sWaY20 View Post

I just made a thread for help but I just swapped everything into this case, but when I hit the power button on the case nothing happens. I think the front panel is faulty bc the led doesn't even light up, connections are right so idk.

My question though if I email fractal on this problem would they send me a new front panel so I don't have to swap cases again?

tappin from the Note II

No offense:

 

Did you plug the power switch wires to the right place on the mobo header?

 

If so, try reversing the wires/plug and plug it back in the mobo header as that might do it.


No offence at all, I wish it was something stupid that I didn't do or forgot to do but I've tried everything. It's all leading to either broken hardware or the front panel is not working. Considering I had a working comp a few hours ago, I doubt any hardware is broke.

tappin from the Note II

Ideas if you wish to pursue:

 

Check the PSU 24 pin and CPU 4/6/8 pin that it's plugged in well.

 

If so and it doesn't "fire up" take the old case power switch plug and plug it into the mobo of course the two cases would be next to each other - you'll then may find out if it's a faulty power switch on the Fractal case.

 

Did you place the mobo standoffs in the correct place and not extra ones in that one of them can touch the backside of the mobo hence shorting it out?


I'm fixing to pull the old case out in a min, I did installed all the standoffs in the correct place.

tappin from the Note II

Process of elimination and luckily in having your old case may answer a question or two.

 

Take your time and please let us know at your convenience.


Will do thank you, I'll know in a lil bit had to pull away from it for a min.

tappin from the Note II
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
Sway's rig
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 5820k Asus x99-A Evga 1080Ti w/ EK wb and backplate Gskill  
Hard DriveHard DriveHard DriveCooling
Samsung Evo  Crusial M4 Wd caviar black Ek predator 360 
OSMonitorKeyboardPower
Windows 10 Dell curved 34" 21:9 (3440x1440) Corsair K70 Corsair AX860 
CaseMouseMouse PadAudio
Thermaltake core p3 Roccat Kone xtd optical Corsair mm300 extended  klipsche pro media 
Other
5 corsair 120 fans 1 corsair 140 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Fractal Design Case Club