Sure, I took two snapshots of the ard installed in the computer case, but when you say "conflicts with any other system components" I guess you mean on the card itself? I can tell you with the Accelro S1 Rev.2 the only issue is one or two of the RAM heatsinks closest to the PCI-E side. The ones that come with the Accelero are too high in that position and touch the cooler's heatpipes. So you either have to bend / maul them, leave them of or replace them with lower ones.
I still had a few lower ones left over from when I stuck a Coolink GFXChilla on a HD5570 (overkill, I know, but the stock fan Sapphire put on it was annoying me) so I put those on. I romeved all plastic trimmings on the Accelero for a) a place to run the tie wraps for my fans, and b) maybe the direct airflowover the gpu area helps a bit.
Even with my fans turned way down on my 600T's fan controller, my card, overclocked at 940 / 1100, hardly runns a sweat with 63 C max.
Originally Posted by sumonpathak
^^can you put some more pics? i want to know if it conflicts with any other system components...