Overclock.net › Forums › Cooling › Water Cooling › New Custom setup on the way... whats missing?
New Posts  All Forums:Forum Nav:

New Custom setup on the way... whats missing?

post #1 of 18
Thread Starter 
ok i am going with water

and i have a Hydor L35 pump, double heater core w/ shroud and fans, MCT40, zerex, uv dye.. on the way from soloz2 plus a tdx cpu block from taeric. what else am i needing and where should i get it?
(i know i need tubbing, clamps/zip ties, and prolly a res.)
(links and opinions are good .. no real budget)
post #2 of 18
just to remind you... you'll only need to use the MCT40 or the water/zerex solution.

are you going for an internal or external setup? I forget...

this is the tubing I got
http://jab-tech.com/Masterkleer-Tubi...D-pr-3079.html
7/16" ID gives a more uniform tubing ID since 1/2" barbs have about 7/16" ID. I just warmed up the tubing and it slid right over. it's also very clear and looks good w/ the zerex and blue uv dye I chose.
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
post #3 of 18
Thread Starter 
umm well i dont have alot of case room.. but i will squeeze it in

edit.. attched a pic of my case

hell if i have too.. i will set my mobo on my desk lol
LL
post #4 of 18
Quote:
Originally Posted by ┬▒PinK=FloYd┬▒
umm well i dont have alot of case room.. but i will squeeze it in

lol... well for an internal setup w/o lots of room you may want to go w/ a t-line. if you have an extra drive bay then you could do a single bay res. A T-line would probably be the easiest. you could get a dd fillport and just drill a hole on the top of your case for a nice finished look and easy filling.

is this your case?
http://www.a-top.com/xblade/xblade.html

doesn't look like there's much room to fit your heater core in the case. You'd have to do an external setup or mount it on the top or rear of your case like I did.
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
post #5 of 18
just wanted to give you an update... got the first coats of paint on your heater core and I sanded the rough spots so depending on weather (supposed to thunderstorm tomorrow) I'll try to get it all done tomorrow so it can be shipped as soon as I get that money order
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
post #6 of 18
well I finished the paint job on the heater core today. it was supposed to thunderstorm, but the storms were pushed back a bit

here's what your stuff... I've got it all boxed up just waiting for the check

Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
post #7 of 18
Thread Starter 
me = giddy as a school girl!!!
post #8 of 18
You want to send that BT my way?
:|
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium 4 561 ES ASUS P5GPL-X nVidia GeForce 7900GTX 2x 512MB Corsair XMS 
Hard DriveOptical DriveOSMonitor
120GB Western Digital Lite-On DVD Burner 1 <3 Beryl+Ubuntu 6.10 17" sick-ass CRT 
KeyboardPowerCaseMouse
Saitek Eclipse 500W Aspire Green and Glowing Logitech MX 518 
Mouse Pad
Regular Mat 
  hide details  
Reply
:|
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium 4 561 ES ASUS P5GPL-X nVidia GeForce 7900GTX 2x 512MB Corsair XMS 
Hard DriveOptical DriveOSMonitor
120GB Western Digital Lite-On DVD Burner 1 <3 Beryl+Ubuntu 6.10 17" sick-ass CRT 
KeyboardPowerCaseMouse
Saitek Eclipse 500W Aspire Green and Glowing Logitech MX 518 
Mouse Pad
Regular Mat 
  hide details  
Reply
post #9 of 18
Thread Starter 
well i got mad at my case.. so i changed a few things before my parts get here

heres the pics
LL
LL
LL
LL
LL
post #10 of 18
I've got you stuff all boxed up, going to try to get it out today


Shipped it out FedEx. I sent you a PM w/ tracking info
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
Darkness
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabye GA-EP45-UD3P EVGA GTX660 8GB G.Skill PK 
Hard DriveOptical DriveOSMonitor
WD 640GB & Samsung F1 750Gb LG BD & HD Windows 8 Pro x64 HP w2207 
KeyboardPowerCaseMouse
FILCO FKBN87M/NPEK Enermax Modu82+ 525w CM 690 Logitech G9x 
Mouse PadAudio
Razor Destructor ODAC 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › New Custom setup on the way... whats missing?