Originally Posted by FannBlade
Best I can do....I swear I'm watching!!!
lol OK I believe you.. and yeah your CPU is hot, but if its folding I can understand..
Awesome green tubing I bought.. made by Koolance, 3/8" ID x 1/2" OD
AC Ryan black rad grill 2x120
These little mounts for the fan doors must go!
I grinded a little metal off each of the 4 corners for a washer + nut to fit for the rad grill.
Fan grill installed
120mm Yate loon fan, removing molex connector
You cant tell, but I chopped the molex off and removed the pins from the connector to sleeve it.
Sleeving and heatshrink slid on..
2 fans done.
3 pin fan extension
Radiator + fans installed
From the front
With the lights off and fans at 100%!
Still need to make the blank PCI plate.. may do that today, not sure. Gotta ride my bike to the bank (lol, no car) and deposit more $ so I can buy some green leds + thin U channel.. and anything else I feel necessary.
Also, I need more opinions. I bought 5 fans total from p-pcs. 3 120mm green led fans + 2 140mm green led fans. 2 120s for the rad, 1 for the case, 1 140 for the PSU, and 1 140 for the case. Turns out the 140mm doesnt fit in the PSU, I tried. I did some research and apparently the OCZ power supply has a 135mm fan, which is a weird size.
Should I just pain the stock black psu fan blades green and call it good, or figure something else out? I was hoping to have a green led fan in the PSU, but looks like it may not be possible.. unless another PSU top will fit on mine, which is unlikely I think.