Overclock.net › Forums › AMD › AMD CPUs › AMD 64 3200+ @ 2.55Ghz using 1.4V
New Posts  All Forums:Forum Nav:

AMD 64 3200+ @ 2.55Ghz using 1.4V

post #1 of 35
Thread Starter 
I have these settings so far:

HTT: 255 Mhz
Multi: 10x
Memory Divider: 133 Mhz (Doesn't boot at 166)
HT: 3x
Vcore: Stock (1.4V)
Idle Temp: 37c
100% load (Prime95) Temp: 44/45c

As I'm quite new, I am not sure what to do next. Should I go for higher clock on stock volts or what?

ty
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
post #2 of 35
Thread Starter 
I have just tried this setting:

HTT: 260 Mhz
Multi: 10x
Memory Divider: 133 Mhz (Doesn't boot at 166)
HT: 3x
Vcore: Stock (1.4V)

Running Prime95 now, got one rounding error. What should I do?
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
post #3 of 35
that means its unstable. But you shouldnt run your ram on a 133 divider. Set it to 166, and loosen your timings. That will increase your rams capability for extra MHz
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3200+ Venice E3 s939 MSI K8N Neo2 Platinum X850XTPE AGP Geil 2gb ddr400 2.5-3-3-8 
Hard DriveOSMonitorKeyboard
WD Caviar 300gb WinXP Acer LCD 17" Creative thing 
PowerCaseMouse
Hiper Type-R 580W Blue Aopen H600B crap Logitech thing 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
3200+ Venice E3 s939 MSI K8N Neo2 Platinum X850XTPE AGP Geil 2gb ddr400 2.5-3-3-8 
Hard DriveOSMonitorKeyboard
WD Caviar 300gb WinXP Acer LCD 17" Creative thing 
PowerCaseMouse
Hiper Type-R 580W Blue Aopen H600B crap Logitech thing 
  hide details  
Reply
post #4 of 35
Thread Starter 
What shall I change the timings to? They are 2-3-2-5 normally.

Also what about pushing for 2.6Ghz using higher volts? Then I could the the 133 Divider which would give me 185 Mhz. Which isn't far from 200Mhz.
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
post #5 of 35
Keep the dram where you have it until you have found your processor sweet spot. If you are still getting prime95 errors you do not want to add the DRAM into the equation.

Raise your vcore one increment and retest. Once stable, then raise your fsb until instable and then raise your vcore. Keep an eye on your temperatures as you do not want to get higher than 55C on load. Keep your core voltage lower than 1.6. Since you are on stock cooling you will probably hit the temperature maximum before you hit either fsb or vcore maximals.

Once you have found your maximum which is usually ~2.5 - 2.7GHz, then you can work with your dram settings.

R
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
Roped In
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 2600k P8P67 Pro Rev (3.1) @ B3 XFX Radeon HD 6950 XXX 16GB G.SKILL Ripjaws 9-11-9-28 
Hard DriveOptical DriveOSMonitor
2 X Callisto Deluxe 25nm 60GB Plextor PX-B910SA 4x Blu-ray DVD-RW Win7 64 2 x Samsung 275T+ 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX10000 Antec 1200 Logitech G7 
Mouse Pad
Splatter Game Pad 
  hide details  
Reply
post #6 of 35
hey good job with the overclocking :] raise the vcore to 1.45v to try stop the erros

with the memory run it on 166 and slackin the timings of to 2.5.3.3.6 and that will be fine if u want to keep them stock up the V in then my 1 incresment :]

wish my chip was like that :[
z4ranger !
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+ @ 2.9ghz asrock 939 dual ati x1950pro 2gb geil bh-5 
Hard DriveMonitorKeyboardPower
samsung 250gb LG flatron(m1710a),8ms logitech diNovo 430w 
CaseMouse
jeantech g-max Logitech diNovo 
  hide details  
Reply
z4ranger !
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+ @ 2.9ghz asrock 939 dual ati x1950pro 2gb geil bh-5 
Hard DriveMonitorKeyboardPower
samsung 250gb LG flatron(m1710a),8ms logitech diNovo 430w 
CaseMouse
jeantech g-max Logitech diNovo 
  hide details  
Reply
post #7 of 35
I'm thinking you bought the BH-5 series that gskill offers, could you post a link to which ram you have so i could find out what chips are in it?

If its BH-5 chips, you should be running that ram at well over 3.0v, this may be your problem with your ram not overclocking at all. you are actually underclocking your ram, so we know there is a problem.

So yea, just post that link, i just dont want to tell you to push it to 3.0 then find out its tccd, and you've fried your ram.
TheGibson
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 MSI BIg Bang XPower MSI GTX 480 Mushkin Redline 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 Western Digital My Book Western Digital my Book Asus DL DVD+/- R Lightscribe 
CoolingOSMonitorKeyboard
Ultra-X Windows 7 64-bit Samsung 206BW Saitek 
PowerCaseMouseMouse Pad
Seasonic 850w Lian-Li pc-60 G5 Razer eXact Mat (speed) 
Audio
X-fi Go! 
  hide details  
Reply
TheGibson
(17 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 MSI BIg Bang XPower MSI GTX 480 Mushkin Redline 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Agility 3 Western Digital My Book Western Digital my Book Asus DL DVD+/- R Lightscribe 
CoolingOSMonitorKeyboard
Ultra-X Windows 7 64-bit Samsung 206BW Saitek 
PowerCaseMouseMouse Pad
Seasonic 850w Lian-Li pc-60 G5 Razer eXact Mat (speed) 
Audio
X-fi Go! 
  hide details  
Reply
post #8 of 35
Thread Starter 
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
post #9 of 35
Thread Starter 
Quote:
Originally Posted by Ropey
Keep the dram where you have it until you have found your processor sweet spot. If you are still getting prime95 errors you do not want to add the DRAM into the equation.

Raise your vcore one increment and retest. Once stable, then raise your fsb until instable and then raise your vcore. Keep an eye on your temperatures as you do not want to get higher than 55C on load. Keep your core voltage lower than 1.6. Since you are on stock cooling you will probably hit the temperature maximum before you hit either fsb or vcore maximals.

Once you have found your maximum which is usually ~2.5 - 2.7GHz, then you can work with your dram settings.

R
Don't you think that 55c is a bit high? I really don't want to break it. Plus how long shall I run Prime95 for to work out if its stable with the increased voltage?

Then once I find the best FSB, we can adjust then RAM timings?

ty
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
Turismo
(13 items)
 
  
CPUMotherboardGraphicsRAM
E2160 @ 3.0GHz (BIOS 1.315v) (CPU-Z 1.272v) Abit IP35 "Dark Raider" ATI 512MB HD3850 (720/1800) 4GB Crucial Ballistix PC2-6400 
Hard DriveOptical DriveOSMonitor
Corsair Force F60 + 640GB WD 2x250GB WD RAID0 Sony NEC 20x Dual Layer DVD±RW Windows 7 Ultimate 64 20.1' Belinea @ 1680x1050 
KeyboardPowerCaseMouse
Logitech Corsair 450W VX 12V@33A CM690 + Zalman MFC1 Wolf King Trooper 
  hide details  
Reply
post #10 of 35
no because your pc will never be under stress like that unless your running prime so your temps wont get to there also u dont need to run prime :] just download this programe occt its good it tests the cpu in 30 mis and tells you if its stable and produses graphs of temprature core etc ..........:] so its good

http://www.short-media.com/download.php?d=456
z4ranger !
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+ @ 2.9ghz asrock 939 dual ati x1950pro 2gb geil bh-5 
Hard DriveMonitorKeyboardPower
samsung 250gb LG flatron(m1710a),8ms logitech diNovo 430w 
CaseMouse
jeantech g-max Logitech diNovo 
  hide details  
Reply
z4ranger !
(13 items)
 
  
CPUMotherboardGraphicsRAM
3700+ @ 2.9ghz asrock 939 dual ati x1950pro 2gb geil bh-5 
Hard DriveMonitorKeyboardPower
samsung 250gb LG flatron(m1710a),8ms logitech diNovo 430w 
CaseMouse
jeantech g-max Logitech diNovo 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › AMD 64 3200+ @ 2.55Ghz using 1.4V