I'm currently running Ket's version but I havent noticed not even one improvement over Official version..
That kinda of makes me wonder if there is any thing modded about it in the 1st place..
This m2102 supposed to hav better memory support (memory table from MF2) but still I haven't been able to run my KHX 1066MHz RAM @ advertised speed on this board not even with my CPU @ stock..
I've spent days trying everything from changing timings (EVERY TIMING AVAILABLE),Voltages(DRAM,NB),STRAPS but it was no go..
Eventually I've gave up and settled with running RAM:FSB=1:1 @ 918MHz CL5..
I know that my RAM is OK becouse I've ran it on EP45 board @ 1150MHz no problems @ all..
P.S: rgwoods run P95 LARGE FFT for @ least 6h but 12h would be ideal to fully test your OC stability..
Go on the last page or page before that of P5Q Pro/Pro TURBO thread and see my compleate settings for 450MHz FSB & my recommended metod of TESTING OC..(It will find any eventual weaknes in your OC)
Follow it in that exact order and if you pass then my friend you're ROCK SOLID..
CHEERS..
That kinda of makes me wonder if there is any thing modded about it in the 1st place..
This m2102 supposed to hav better memory support (memory table from MF2) but still I haven't been able to run my KHX 1066MHz RAM @ advertised speed on this board not even with my CPU @ stock..
I've spent days trying everything from changing timings (EVERY TIMING AVAILABLE),Voltages(DRAM,NB),STRAPS but it was no go..
Eventually I've gave up and settled with running RAM:FSB=1:1 @ 918MHz CL5..
I know that my RAM is OK becouse I've ran it on EP45 board @ 1150MHz no problems @ all..
P.S: rgwoods run P95 LARGE FFT for @ least 6h but 12h would be ideal to fully test your OC stability..
Go on the last page or page before that of P5Q Pro/Pro TURBO thread and see my compleate settings for 450MHz FSB & my recommended metod of TESTING OC..(It will find any eventual weaknes in your OC)
Follow it in that exact order and if you pass then my friend you're ROCK SOLID..
CHEERS..












