Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] NZXT PHANTOM Owner's Club
New Posts  All Forums:Forum Nav:

[Official] NZXT PHANTOM Owner's Club - Page 1284

post #12831 of 15204
Here's the pics from last nights work. It's rough right now, but I'm just waiting on the rest of the glue to dry before I sand it and paint it.


Here, the most obvious mod is the cut motherboard. I used the dimensions I found online for the Swiftech 480mm rad to measure and mark my cuts, and I gave myself a couple mm room just in case. The rads will have to butt up against the back to fit, so I had to cut outthe bottom 2 and a half PCIE slot covers as well, so an M-ATX mobo like mine or an M-ITX would be the only way to fit these rads where I want them in this case. I also took off the 5.25-3.5" adapter I had been using as a floor for the 5.25 cage and spot welded the original floor in it, still 1 bay less than stock. Still havent decided what I'm going to do for the bottom of the case rear wall, so for now nothing is further modded there than necessary for fitment.




This cutout is for a mod you will find out more about in the future thumb.gif




Here you can see that, not only did I decide where my power extension cable will terminate, but that I have it cut out and glued in place already, and will be able to hide the entire cord biggrin.gif. The onlt part of the cord you will see inside is the 90* plugged into the PSU. I also have the case door notched out so it will fit, since they overlap. Hopefully I'll be able to post updates on it tonight.
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
post #12832 of 15204
Thread Starter 
Quote:
Originally Posted by wordsfrommike View Post

How did you mount the two SSD? I really like the look of it!!

If you click on my build log it shows it in there. Thanks by the way.
post #12833 of 15204
Is there a way to get the H100 to fit in P/P config?
    
CPUMotherboardGraphicsRAM
i5-6600K Gigabyte GA-Z170X-Gaming 5 Gigabyte 980 Ti Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200MHz  
Hard DriveCoolingOSKeyboard
Samsung 840 EVO 250gb Swiftech H240-X  Win10 Pro Logitech K830 
PowerCaseOther
EVGA Supernova 1000w G2 Phanteks Enthoo Evolv ATX Tempered Glass EK Titan X / 980 Ti Full Cover Waterblock  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5-6600K Gigabyte GA-Z170X-Gaming 5 Gigabyte 980 Ti Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200MHz  
Hard DriveCoolingOSKeyboard
Samsung 840 EVO 250gb Swiftech H240-X  Win10 Pro Logitech K830 
PowerCaseOther
EVGA Supernova 1000w G2 Phanteks Enthoo Evolv ATX Tempered Glass EK Titan X / 980 Ti Full Cover Waterblock  
  hide details  
Reply
post #12834 of 15204
Quote:
Originally Posted by Blaze0303 View Post

Is there a way to get the H100 to fit in P/P config?

I believe you can if you use the top 200mm fans as push or pull and mount 2 120s to the bottom of the H100.

EDIT - NVM, I don't think it'd fit.
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
post #12835 of 15204
Quote:
Originally Posted by Phelan View Post

I believe you can if you use the top 200mm fans as push or pull and mount 2 120s to the bottom of the H100.
EDIT - NVM, I don't think it'd fit.

I'm not positive, but isn't it bad to mismatch fans when it comes to rads?
    
CPUMotherboardGraphicsRAM
i5-6600K Gigabyte GA-Z170X-Gaming 5 Gigabyte 980 Ti Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200MHz  
Hard DriveCoolingOSKeyboard
Samsung 840 EVO 250gb Swiftech H240-X  Win10 Pro Logitech K830 
PowerCaseOther
EVGA Supernova 1000w G2 Phanteks Enthoo Evolv ATX Tempered Glass EK Titan X / 980 Ti Full Cover Waterblock  
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i5-6600K Gigabyte GA-Z170X-Gaming 5 Gigabyte 980 Ti Corsair Vengeance LPX 16GB (2x8GB) DDR4 3200MHz  
Hard DriveCoolingOSKeyboard
Samsung 840 EVO 250gb Swiftech H240-X  Win10 Pro Logitech K830 
PowerCaseOther
EVGA Supernova 1000w G2 Phanteks Enthoo Evolv ATX Tempered Glass EK Titan X / 980 Ti Full Cover Waterblock  
  hide details  
Reply
post #12836 of 15204
I don't think so, but I could be worng. I've been using 2 different fans on my H80 for 6 months...
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
Red Rover
(25 items)
 
 
CPUMotherboardGraphicsRAM
intel i5 2550K Asus Maximus V Gene XFX 6950 reference Avexir CORE series red LED 16 GB 
Hard DriveHard DriveOptical DriveOS
Mushkin Enhanced Chronos 120 GB SSD WD Blue 2.5" ASUS DVD-RW Win7 Ultimate 
MonitorMonitorKeyboardPower
Acer 23' LED LCD 5ms monitor Acer 23' LED LCD 5ms monitor Cooler Master Storm Trigger XFX 750w  
CaseMouseMouse PadAudio
NZXT Phantom Full Tower in White/Red Logitech G600 generic red/white/black mouse pad Sony 520w stereo 
OtherOtherOtherOther
Bitfenix single-sleeved cable extensions Red Swiftech MCR420-QP Swiftech MCR420-QP Swiftech Apogee Drive II 
OtherOtherOtherOther
Swiftech Maelsrtom EK FC6970 waterblock NZXT FS200 (x5) NZXT FX120 (x1) 
Other
XSPC Xinrulian 120mm (x8) 
  hide details  
Reply
post #12837 of 15204
Quote:
Originally Posted by KirkyMod View Post

Xnine, I was also wondering whether I can get the Green Fan controller and on/off LEDs off Nzxt or just buy the Leds and solder them on? I've seen plenty of people change the Leds but I swear I read somewhere that when the Black/Green Phantom came out, people were able to swap there regular blue Leds to Green.
Cheers.

I've never seen any. Your best bet would be to solder them.
post #12838 of 15204
Quote:
Originally Posted by PoWn3d_0704 View Post

I do love my Phantom... Cable Management
AMD Phenom II x6 1090t @ 3.8ghz
8GB DDR3-1600 G.Skill
Gigabyte GTX 670 Windforce
HT Omega PCI 7.1 Surround Sound card
Thermaltake Blackwidow 850w
Asus M4N98TD-Evo motherboard
Using NZXT Hue color controler
Three 1680x1050 screens in Surround


nice build...id invest in a can of compressed air though and clean out the dust you can see in the last photo....dust + pc = no good! but very nice thumb.gif
D00M
(14 items)
 
The Great White
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 7400 ASRock B250 Gaming K4 Motherboard MSI NVIDIA GeForce GTX 1070 8GB Gaming X Corsair Vengeance LPX CMK16GX4M2A2133C13R 16GB ... 
Hard DriveCoolingOSMonitor
120GB OCZ VERTEX 3 SSD Corsair Hydro Series H60 120mm Liquid CPU Cooler WINDOWS 10 AOC 28" 4K 
KeyboardPowerCaseMouse
LOGITECH G910 ORION SPARK SilverStone Strider Gold 750W ST75F-GS Phanteks Eclipse P400S Tempered Glass Black Red LOGITECH G900 
Mouse PadAudio
RAZER VESPULA LOGITECH G933 7.1 WIRELESS HEADSET 
CPUMotherboardGraphicsRAM
AMD FX-8350 (STOCK) Gigabyte 990FX-UD7 Radeon 7970 G-Skillz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung OCZ Vertex 3 SSD Western Digital Samsung 24x DVD Burner/Player 
CoolingCoolingOSMonitor
Cooler Master Hyper Evo xigitek 120mm blue led case fan X 5 Windows 7 Premium 23" LG LED IPS panel 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec 750W gamers edition NZXT Phantom 410 Razer Naga MMOG  
Mouse PadAudio
Razer Vespula Gaming Matt Logitech X-530 5.1 
  hide details  
Reply
D00M
(14 items)
 
The Great White
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i5 7400 ASRock B250 Gaming K4 Motherboard MSI NVIDIA GeForce GTX 1070 8GB Gaming X Corsair Vengeance LPX CMK16GX4M2A2133C13R 16GB ... 
Hard DriveCoolingOSMonitor
120GB OCZ VERTEX 3 SSD Corsair Hydro Series H60 120mm Liquid CPU Cooler WINDOWS 10 AOC 28" 4K 
KeyboardPowerCaseMouse
LOGITECH G910 ORION SPARK SilverStone Strider Gold 750W ST75F-GS Phanteks Eclipse P400S Tempered Glass Black Red LOGITECH G900 
Mouse PadAudio
RAZER VESPULA LOGITECH G933 7.1 WIRELESS HEADSET 
CPUMotherboardGraphicsRAM
AMD FX-8350 (STOCK) Gigabyte 990FX-UD7 Radeon 7970 G-Skillz 
Hard DriveHard DriveHard DriveOptical Drive
Samsung OCZ Vertex 3 SSD Western Digital Samsung 24x DVD Burner/Player 
CoolingCoolingOSMonitor
Cooler Master Hyper Evo xigitek 120mm blue led case fan X 5 Windows 7 Premium 23" LG LED IPS panel 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Antec 750W gamers edition NZXT Phantom 410 Razer Naga MMOG  
Mouse PadAudio
Razer Vespula Gaming Matt Logitech X-530 5.1 
  hide details  
Reply
post #12839 of 15204
@PoWn3d_0704

I'd really clean that. Even just wiping the dust away or blowing it away would make it better. Nice rig though
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
Current rig
(16 items)
 
   
CPUMotherboardGraphicsRAM
i7-860 @3800MHz P7P55D R9 290 @1150/1450MHz 2*4GB Hyper X Black @1600 MHz 
Hard DriveCoolingOSMonitor
Crucial M4 64 Gig (7mm version) Custom Water Cooling, details in signature. Windows 8 Pro LG Flatron W2243S 21.5" 1080p 
KeyboardPowerCaseMouse
Razer Lycosa OCZ StealthXstream 2 700W Fractal Design Arc Midi R2 Razer Deathadder 3500dpi 
Mouse PadAudioOtherOther
Razer Scarab Razer Carcharias V2 (X360/PC) Roccat Apuri mouse Bungee / usb hub Samsung HDD 7200 rpm 1To 
CPUGraphicsPowerOther
EK Supreme HF CU Full copper EK-FC R9-290X - Nickel  MCP350 Alphacool DDC plexi top 
OtherOtherOtherOther
EK Coolstream XTC 280mm + 2x D14SM-12 Yate Loon... EK Coolstream XTC 280mm + 4x Akasa Apache (push... Alphacool Cape Corp Coolplex 250ml reservoir 8/11mm ClearFlex60 tubing 
OtherOther
Mayhems Blue Berry Pastel + 9mL Mayhems blue dye Phobya fittings: 2x 45° | 2x 90° | 6x Straight 
  hide details  
Reply
post #12840 of 15204
Hello, i'm new from this site and i would to say hello to all the community smile.gif
I got a Phantom and i'm upgrading my PC with a watercooling system, i'm buying this one from EK

http://www.ekwb.com/shop/kits-cases/kits/ek-kit-h3o-360-hfx.html (i hope i can put this link)

EK 360 HFX but i would like to know (before buying it) if the radiator have to be slim or not because the height of the EK radiators is 64cm without the fan there will be problem with the Motherbord or something other??

Thank you smile.gif

P.s.

I will put it on the top of the case.
Edited by Matt-One - 8/29/12 at 6:12am
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] NZXT PHANTOM Owner's Club