Haven't posted in here for a lil' while, but I have my WC setup running (far from complete)
Since the photos were taken, I've swapped the Ripjaw ram for 16GB Gskill Snipers running at 1600/CL8 1.25V
Many people are asking about the 360 up top, I just used the middle fan as my 'bracket' in the top of the case. Even though its 1 fan supporting the whole radiator and water it seems to hold really firm and doesn't damage the fan or prevent it spinning smoothly.
The RX240 in the bottom is just secured with screws from underneath going through the fan cutouts. In future I'll cut out a big rectangle there to mount properly but it works for now.
HDD's: I have an SSD and 2.5" laptop drive on the back wall for Windows and Mydocs.
Then in 2x 5.25" bays I have hotswap bays, 2x WD Caviar Blue 1TB in raid 0 for programs, games, media etc.
GPU bridge I just made out of 2 elbow fittings and some toob. It works well, just didn't wanna have big loops of tubing everywhere and be worried about kinks.
Future will be sleeving all the cables, adding more fans, better lighting.. Then when I have lots of spare cash, another huge radiator out the back maybe w/split loops and freeze the cpu with a peltier/TEC.
I'm quite tempted to use copper tubing as seen here:
Due to the extreme awesomeness of how it looks
I'd also like to get/make some backplates for the GPU's since they're different colours (both 6950's) and I like things matching
The split loop will most likely have the XSPC 750 on GPU's with the rx240, then 2 x 360's, *insert pump here* and frozenQ helix res cooling the TECEdited by DragonCypher - 7/18/11 at 2:07am