Originally Posted by dembo1305
I wasn't able to mount the rad in the top with the 200mm fan installed.. it wouldn't fit..
In order to mount the rad with the optional 200mm fan installed on top, I had to slightly bend the rad mounting brackets forward toward the front side of the case. This also moved the rad away from my RAM, which is quite tall. The side of the rad sits almost flush with the side panel once the case is closed, but it fits fine. You have to insert the rad (with brackets attached and slightly bent forward) at an angle, first getting the single-hole bracket up and between the two 200mm fan frames, and then raise the front two-holed bracket up and tighten it up!Edited by RJT - 1/23/11 at 3:10pm