hey guys, anyone have a picture of the airflow for these things. Would adding a 120MM radiator w/intaking push/pull fans make things too warm in this case? Of course, I'm flipping theMotherboard tray so the Southbridge will be at the top, not the CPU.
I was just wondering cause I currently only have a Antec Kuhler 920 cooler, but will be adding a Reservor to that setup when money permits. I'm thinking that with the MB tray reversed, I won't have enough hose on the factory closed loop to mount the radiator in the top of the Phantom, and would rather not mount it to the floor of it, figure furthest from the board as possible.