Overclock.net › Forums › Case Mods & Cases › Computer Cases › case wires
New Posts  All Forums:Forum Nav:

case wires

post #1 of 3
Thread Starter 
i had a question about case wires..the mobo manuals colors match up perfect with what my cases wires are and all the ground wires are white but in order too put the white ground on the pins to the right of the colored the writing would be facing down and the other day i started the comp up with the reset and power buttons writing facing up and white wires to the left of the colored ones it worked but the power led and hd led didnt..does this mean the power switch and reset will work both ways?just wanted to be sure.
post #2 of 3
Quote:
Originally Posted by buppy
i had a question about case wires..the mobo manuals colors match up perfect with what my cases wires are and all the ground wires are white but in order too put the white ground on the pins to the right of the colored the writing would be facing down and the other day i started the comp up with the reset and power buttons writing facing up and white wires to the left of the colored ones it worked but the power led and hd led didnt..does this mean the power switch and reset will work both ways?just wanted to be sure.
Well im my experience they wont work both ways as you have to match up the Negative and Positive from case to the mobo.
post #3 of 3
Thread Starter 
hmm thats strange all the grounds are white colors are (power led green..speaker orange....reset blue...pwrbutton soft0ff yellow.....hd activity red)so if i plug them in with the writing were you can see it the white wire will be on the positive pin and color on the negative with which i did do that and it worked except the hdled and power led so it could be a the case wires are reversed or somethin?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › case wires