Overclock.net › Forums › Cooling › Water Cooling › [Official] XSPC Rasa 750 RS/RX120/240/360 Kit Club
New Posts  All Forums:Forum Nav:

[Official] XSPC Rasa 750 RS/RX120/240/360 Kit Club - Page 359

post #3581 of 13773
Here are first results on 1090T CHIV listed below. Before (w/Scythe Mugen II and P/P GT AP-15's) vrs after (Rasa RS360 kit w/GT AP-15's). This is w/AS5, 15 hrs leak test, 6-8 short runs of prime (2-3 hrs each), and a total of 5 days 24/7 running.

Bios was left untouched.
1st attach is a 12 hr run of prime on air with ambient 69-70F.
2nd is same settings with RS360 on prime with ambient 71-72F.

In both tests CPU temp seemed to spike to the max for just a brief few seconds at the same point in the test (32 minute mark and again at 2 hr mark). After spikes it ran very close to current temp showing in HWMonitor.

Note... Second attach also shows current idle temp (ambient 72F).

Other than the GT's and Primochill tubing, the RS360 kit is stock including the water block which I did straight edge and it looks at least as bad as the pic in the Review from the OP. I couldn't believe it!!!!! Thing looks like crap with probably a .002-.003 crown in the center at minimum. Just thought I'd try it in stock form first.

Might have to use a dial indicator and surface grind this thing, than lap just for finish.

 
Bruce
(14 items)
 
Ryzen Build
(20 items)
 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
  hide details  
Reply
 
Bruce
(14 items)
 
Ryzen Build
(20 items)
 
CPUMotherboardGraphicsRAM
FX 6350 Asus M5A99FX Pro R2.0 GTX220 G.Skill Ripjaws X F3-17000CL9D-8GBXLD 9-11-9-28... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 840 Pro WD20EFRX 64M Red x4 raid 10 WD5001AALS Blk Asus DRW-24B1ST 
CoolingOSMonitorKeyboard
Hyper 212 Evo R2 Windows Server 2008 R2 Standard Asus  Logitech MK300 
PowerCase
Corsair HX500 Corsair 330R Titainium 
CPUMotherboardGraphicsRAM
R7 1800x Crosshair VI Hero Diamond 7970 GSkill FlareX F4-3200C14D-16GFX  
Hard DriveHard DriveHard DriveHard Drive
Samsung 960 EVO NVMe Samsung 840 SSD Corsair GT SSD WD 2TB Black 
Hard DriveCoolingCoolingCooling
WD 4TB Red EK-FB Asus C6H Monoblock XSPC GPU Razor WB XSPC RX 360 
CoolingCoolingCoolingCooling
XSPC RS 360 XSPC EX140 D5 Vario Gentle Typhoon AP-15 1850 rpm 
OSMonitorPowerCase
Win 10 Pro Asus VE248H x2 EVGA 850 G2 Xigmatek Elysium 
  hide details  
Reply
post #3582 of 13773
Quote:
Originally Posted by Silomatic View Post
So I do in fact need to use some sort of backplate, wether it be modded or rigged from another backplate?


EDIT: I'm kinda hesitant to destroy my back plate on a 230 dollar motherboard is why I'm inquiring.
I have infact made a guide for modding the stock amd backplate for the rasa block, it is linked in the OP.
post #3583 of 13773
Classic! +REP!

Quote:
Originally Posted by Garanthor View Post
I've got to wonder what they talk about in that club.

"yeah so today I looked and yup my fan is still spinning...I'll keep you guys posted on how it goes tomorrow" LOL.
post #3584 of 13773
Ok, so I took a nice little nap. In the process of waking up I realized something. The assembly screws that come with the Intel socket adapters actually screw into the Amd backplate. Needless to say I canceled my order of the Noct back plate. Wish I was always "smart" lol
Phantom Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
x6 1090t Corsshair IV Formula XFX HD 6870 BE Gskill Trident 4gb (2x2gb) DDR3 1600 
Hard DriveOptical DriveOSMonitor
2x WD SATA 6.0gb/s RAID 0 ASUS W7 64bit Asus 23.6" 
KeyboardPowerCaseMouse
Logitech G510 <working on getting a DECK Fire> NZXT Hale90 750W NZXT Phantom Mionix Naos 5000 
Mouse Pad
XTRAC PADS Ripper XXL 
  hide details  
Reply
Phantom Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
x6 1090t Corsshair IV Formula XFX HD 6870 BE Gskill Trident 4gb (2x2gb) DDR3 1600 
Hard DriveOptical DriveOSMonitor
2x WD SATA 6.0gb/s RAID 0 ASUS W7 64bit Asus 23.6" 
KeyboardPowerCaseMouse
Logitech G510 <working on getting a DECK Fire> NZXT Hale90 750W NZXT Phantom Mionix Naos 5000 
Mouse Pad
XTRAC PADS Ripper XXL 
  hide details  
Reply
post #3585 of 13773
What kit should I get? Will the RS240 be enough???

post #3586 of 13773
Quote:
Originally Posted by Kahbrohn View Post
What kit should I get? Will the RS240 be enough???

LMAO!
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel I7 860  Asus P7P55D-E Pro MSI ATI 6990 8gb G.Skill 1600 DDR3 (4x2Gb) 
RAMHard DriveHard DriveOptical Drive
G. Skill 1600 DDR3 OCZ Agility 2 120Gb  Seagate SATA Barracuda 160GB TSH663B DVD burner 
CoolingCoolingCoolingCooling
EK Supreme HF XSPC RC360 XSPC DDC Reservoir EK-FC6990 - EN (Nickel) 
OSMonitorKeyboardPower
Windows 10 64bit Pro Gateway FHX2300 Microsoft Wireless Multimedia V2 PC Power & Cooling Silencer 750 Quad 
CaseMouseAudio
Cooler Master HAF 932 Microsoft Wireless Optical Creative 5.1 
  hide details  
Reply
post #3587 of 13773
Quote:
Originally Posted by Zaiber View Post
Go with OCZ Freeze and I think you'll be fine just the killcoil. It's not like you're having fish inside your watercooling so you should be fine.
The fish!!!!! Of course, I knew I was missing something. Do you think a pet store would have UV reactive fish...preferably blue to match my MOBO? Hmmm I'd have to do something about that pump inlet though.
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
post #3588 of 13773
Quote:
Originally Posted by The Sandman View Post
Here are first results on 1090T CHIV listed below. Before (w/Scythe Mugen II and P/P GT AP-15's) vrs after (Rasa RS360 kit w/GT AP-15's). This is w/AS5, 15 hrs leak test, 6-8 short runs of prime (2-3 hrs each), and a total of 5 days 24/7 running.

Bios was left untouched.
1st attach is a 12 hr run of prime on air with ambient 69-70F.
2nd is same settings with RS360 on prime with ambient 71-72F.

In both tests CPU temp seemed to spike to the max for just a brief few seconds at the same point in the test (32 minute mark and again at 2 hr mark). After spikes it ran very close to current temp showing in HWMonitor.

Note... Second attach also shows current idle temp (ambient 72F).

Other than the GT's and Primochill tubing, the RS360 kit is stock including the water block which I did straight edge and it looks at least as bad as the pic in the Review from the OP. I couldn't believe it!!!!! Thing looks like crap with probably a .002-.003 crown in the center at minimum. Just thought I'd try it in stock form first.

Might have to use a dial indicator and surface grind this thing, than lap just for finish.
Hmmmm....you've got me thinking. My CPU was previsouly lapped. What is the group consensus? Is it worthwhile taking apart the loop to check and possibly lap the XSPC waterblock?
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
post #3589 of 13773
Quote:
Originally Posted by Kahbrohn View Post
What kit should I get? Will the RS240 be enough???

Pfhhh....the H50 should be able to handle that.
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2500K @ 4.5Ghz Gigabyte GA-Z68XP-UD4 gtx 670 Corsair Vengeance 4 X 4GB @ 1600 mhz 
Hard DriveHard DriveCoolingOS
1 TB Seagate 7200.12 OCZ Vertex 3 MAX IOPS XSPC RASA 750 RX360 Win 7 Pro 64 bit 
MonitorKeyboardPowerCase
Asus 27" 144hz 1920 X 1200 Razer Black Widow Ultimate BF3 Edition Corsair AX1200 HAF 932 Advanced 
MouseAudio
Razer Imperator BF3 Edition SB X-FI Titanium PCI Express 
  hide details  
Reply
post #3590 of 13773
Should I mount my GT AP-14s in pull of push? It will all be internal.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Official] XSPC Rasa 750 RS/RX120/240/360 Kit Club