Originally Posted by Annex
I just realized my side window mod will likely prevent me from routing tubing from the bottom, so a bottom mounted rx120 is out of the question it seems.
The more expensive alternative is upgrading my rs360 to an rx360.. I'm just curious if it'll make a large difference with two GPU's and CPU on the loop.. I know for sure it'll work better if I get a fan controller and lower the rpms on my AP-15's, but will I get significantly increased thermal performance with it working in tandem with an rx120 at full speed?
You could mount the 360 up top, and the 120 at the rear fan intake over the CPU.
The RX will give you better temps, but how much I am not sure. I would use what you have first. If you do not have the 120 yet, I would suggest going with an RX240 or could you, and would you want to, add an RX360 to use with your RS360?
Someone correct me if I am wrong, but your GT(AP-15s) are going to shine on the thicker RX rad.
If you add any RAD (120, 240, 360, etc.) to the RAD you already have it will give you better temps, if you have CPU and two GPUs.