Originally Posted by wholeeo
They will be when I come to town.
Edit: For those of you with Zotac AMP! 580 cards, did you have to up the voltage a bit to get them stable at their factory clocks? My setup would crash on 3DMark/Unigine on stock voltage.
It does seem like a slight bump in voltage is needed - especially with the 280 family of drivers. However, I'm using Afterburner to manage all of my clocks so currently the Zotac is underclocked to the EVGA stock clock of 772MHz. I'm most likely going to flash all the cards soon to the same EVGA BIOS to make things easier to manage.
EDIT: I found something interesting when I stopped syncing the clocks together in Afterburner.
The Zotac stock GPU clock is 815MHz but only uses 1.0V, whereas it takes 1.025V for my EVGA's to run at their stock clocks of 772MHz. Sadly, even though my Zotac may be a better chip, it has to play nice with the other two. Edited by covert ash - 9/14/11 at 9:30pm