Overclock.net › Forums › Software, Programming and Coding › Networking & Security › Bridging a connection on Win 7 with static IP's
New Posts  All Forums:Forum Nav:

Bridging a connection on Win 7 with static IP's

post #1 of 4
Thread Starter 
Hi, i have a windows 7 machine wirelessly connected to my router (router's IP: 192.168.0.1) and my windows 7 machine is (192.168.0.100) I want to bridge this connection over a wire to a blu-ray player so i can update it. What settings would i set into my bluray player in order to hook it up to the bridge?

The bridge on the PC end looks like this

IP: 192.168.0.100
Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS 1: 192.168.0.1

Thanks!
post #2 of 4
Quote:
Originally Posted by mho2;11731864 
Hi, i have a windows 7 machine wirelessly connected to my router (router's IP: 192.168.0.1) and my windows 7 machine is (192.168.0.100) I want to bridge this connection over a wire to a blu-ray player so i can update it. What settings would i set into my bluray player in order to hook it up to the bridge?

The bridge on the PC end looks like this

IP: 192.168.0.100
Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS 1: 192.168.0.1

Thanks!

Shouldn't need anything if your router is still configured as a DHCP server. Bridging the two connections would allow the BluRay player to request a DHCP address from the router.

If you don't have DHCP enabled on the router, then just specify addresses in the same subnet as your PC.

IP: 192.168.0.250
Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS: 192.168.0.1
ESXi Host 1
(15 items)
 
  
CPUMotherboardGraphicsRAM
(2x) Intel Xeon E5520 Dell OnBoard Matrox G200 24GB DDR3 12x2GB UDIMMS (18 slots total) 
Hard DriveHard DriveHard DriveHard Drive
PERC6-RAID50 Intel 730 480GB Intel 320 300GB Synology DS414 iSCSI SAN 
OSMonitorKeyboardPower
VMWare vSphere5 Enterprise Plus Dell iDRAC6 Remote Management [KVM-Over-IP] Dell iDRAC6 KVM Dell Hot-Swap Redundant 1100W 
CaseMouse
Dell PowerEdge T710 Stock Dell iDRAC6 KVM 
  hide details  
Reply
ESXi Host 1
(15 items)
 
  
CPUMotherboardGraphicsRAM
(2x) Intel Xeon E5520 Dell OnBoard Matrox G200 24GB DDR3 12x2GB UDIMMS (18 slots total) 
Hard DriveHard DriveHard DriveHard Drive
PERC6-RAID50 Intel 730 480GB Intel 320 300GB Synology DS414 iSCSI SAN 
OSMonitorKeyboardPower
VMWare vSphere5 Enterprise Plus Dell iDRAC6 Remote Management [KVM-Over-IP] Dell iDRAC6 KVM Dell Hot-Swap Redundant 1100W 
CaseMouse
Dell PowerEdge T710 Stock Dell iDRAC6 KVM 
  hide details  
Reply
post #3 of 4
Thread Starter 
Quote:
Originally Posted by ComGuards;11732568 
Shouldn't need anything if your router is still configured as a DHCP server. Bridging the two connections would allow the BluRay player to request a DHCP address from the router.

If you don't have DHCP enabled on the router, then just specify addresses in the same subnet as your PC.

IP: 192.168.0.250
Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS: 192.168.0.1

Hm, i used this guide:
http://answers.yahoo.com/question/index?qid=20101221171640AAFkMKh

When i attempted to use the same DNS, i suppose that caused an error. not sure!
post #4 of 4
You could always try to use Internet Connection Sharing (ICS) if you have problems attempting to bridge these connections..
Waiting on X399
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II B57 @ X4 3.9 Gigabyte 790FXTA-UD5 Sapphire Radeon 290 8 GB G.Skill 2133 
Hard DriveCoolingOSKeyboard
250 GB 840 EVO Noctua NH-D14 Windows 10 Logitech K350 
PowerCaseMouseMouse Pad
Seasonic x750 Corsair 600T Logitech G100s Razer Goliathus Speed 
Audio
Plantronics Gamecom 788 
  hide details  
Reply
Waiting on X399
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II B57 @ X4 3.9 Gigabyte 790FXTA-UD5 Sapphire Radeon 290 8 GB G.Skill 2133 
Hard DriveCoolingOSKeyboard
250 GB 840 EVO Noctua NH-D14 Windows 10 Logitech K350 
PowerCaseMouseMouse Pad
Seasonic x750 Corsair 600T Logitech G100s Razer Goliathus Speed 
Audio
Plantronics Gamecom 788 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Networking & Security
Overclock.net › Forums › Software, Programming and Coding › Networking & Security › Bridging a connection on Win 7 with static IP's