Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Project Turambar: Corsair Obsidian 800D, Liquid Cooled, i7-970, GTX 580 SLI (Update 02.28.2012)
New Posts  All Forums:Forum Nav:

Project Turambar: Corsair Obsidian 800D, Liquid Cooled, i7-970, GTX 580 SLI (Update 02.28.2012)

post #1 of 27
Thread Starter 
(Upate - 02/17/2012)
Started a new build. Check it out here.

Here is the build log for my system. It isn't exactly a "new" build as I have been working on it for over a year. But I recently obtained the final components to complete the build as I originally intended.

It will be a liquid cooled PC with two loops. One for the CPU & Chipset, and one for the GPUs. Housing the new build is the Corsair Obsidian 800D. This case is a monster, and I love the all black look, inside and out. I had to make a few minor modifications for the two loop system to work, but the mod went great, and I am pleased with the results.

Parts List:
* Case: Corsair Obsidian 800D Full ATX
* Power Supply: Corsair HX1000
* Motherbord: EVGA X58 Classified
* CPU: Intel i7 Core 970
* RAM: 12GB Corsair Dominator @ 1600MHz
* GPU: 1 EVGA GTX 580 Hydro Copper 2
* GPU: 2 EVGA GTX 580 Hydro Copper 2
* GPU: 3 EVGA 9800GT (Dedicated PhysX, and to power side LCD monitors)
* Sound Card: Creative X-Fi Titanium Fatal1ty Edition
* Hard Drive 1: Intel X-25m 160GB SSD (Operating System & Programs)
* Hard Drive 2: WD Velociraptor 150GB HDD (Game/Steam Installs)
* Hard Drive 3: Seagate 500GB (User Files)
* Hard Drive 4: Seagate 1TB (Storage)
* Optical Drive: Asus Blu-Ray / DVD+R
* Fan Controller: Scythe Kaze Master Pro 5.25" 6 Channel Fan Controller / Temp Display
* Card Reader: Silverstone FP35 housed in Lian Li 5.25” to 3.5” bay adapter

Loop 01 (Blue)
* Tubing: PrimoFlex Pro LRT UV Blue Tubing -3/8in. ID X 5/8in. OD (10ft)
* Coolant: Feser One UV Blue
* Reservoir: XSPC Acrylic Dual 5.25in. Reservoir (originally was a XSPC 5.25" Black Single Bay Res)
* Pump: Swiftech MCP350 12 VDC Pump
* Radiator: HardWare Labs X-Flow Extreme III
* CPU Block: Swiftech APOGEE-XT Extreme (originally was a Swiftech GTZ as seen in a few pictures)
* MoBo Block: EK-EVGA X58 Classified Full Board Waterblock
* Fittings: Bitspower Compression Fitting-ID 3/8" OD 5/8" (x2)
* Fittings: Bitspower Barb Fitting-ID 3/8" (x2)
* Fittings: Bitspower G1/4 Dual Rotary 45-Degree Compression Fitting-ID 3/8" OD 5/8" (x4)
* Misc Parts: Bitspower Metal T-Block, Bitspower Temp Sensor, Bitspower Male to Male G 1/4 Fitting
* Koolance QDCs (Quick Disconnects) (x2)
* Fans: Cooler Master R4 120mm Blue LED Fan R4-L2R-20AC-GP (x3)

Loop 02 (Green)
* Tubing: PrimoFlex Pro LRT UV Green Tubing -3/8in. ID X 5/8in. OD (10ft)
* Coolant: Feser One UV Green
* Reservoir: XSPC Acrylic Dual 5.25in. Reservoir (originally was a XSPC 5.25" Black Single Bay Res)
* Pump: Swiftech MCP350 12 VDC Pump
* Radiator: HardWare Labs GTX240
* GPU Block: The EVGA GTX 580 Hydro Coppers come with a custom Swiftech WB pre-installed
* Fittings: Bitspower Matte Black Rotary 90 Degree Compression Fitting-ID 3/8" OD 5/8" (x2)
* Fittings: Bitspower Compression Fitting-ID 3/8" OD 5/8" (x4)
* Fittings: Bitspower Barb Fitting-ID 3/8" (x2)
* Fittings: Bitspower G1/4 Dual Rotary 45-Degree Compression Fitting-ID 3/8" OD 5/8" (x2)
* Misc Parts: Bitspower Acrylic T-Block, Bitspower Temp Sensor, Bitspower Male to Male G 1/4 Fitting
* Koolance QDCs (Quick Disconnects) (x2)
* Fans: Cooler Master R4 120mm Blue LED Fan R4-L2R-20AC-GP (x2)

I will post the pictures within the build log, but will also add a link to a larger version of each picture if anyone would like to take a closer look at something.

The case arrived in excellent condition. I knew the dimensions, but was still amazed as to how big it was.

3960101889_f0ec90468d.jpg
Build_01

In order to make it work for my dual loop idea, I had to modify the bottom of the case to accept a radiator. For a more detailed work log on adding a bottom radiator, go here:
http://forum.corsair.com/forums/showthread.php?t=81698
In order to remove the bottom hard drive cage you must remove a total of 2 screws and 8 rivets. Two of the rivets must be replaced once the drive cage has been removed.

3960101961_9bcb0bc337.jpg
Build_02

3960891202_b798fc3a62.jpg
Build_03

3960105505_e3c5bf792d.jpg
Build_04

Before adding the power supply, I applied some weather stripping material to the rails that will hold up the PSU to give a bit of cushion. I also used Vinyl Dye to make all the PSU cables jet black. I was planning on individually rel-sleeving all of the cables but decided against it after I tried on a test cable and realized how much of a pain in the ***** it was. I also didn’t want the added bulk of the individual sleeves. Vinyl Dye is not paint. It gets absorbed into the cable sleeve and turns everything black. Looks great and is really easy to apply.

3960105637_82b21685fa.jpg
Build_05

Next step was to remove the stock cooling from the EVGA X58 Classified and install a full board block from EK. It’s a great match for the board, and temps on the VREGs and Chipset are MUCH lower than with stock cooling.

3960889420_cb93734ccf.jpg
Build_06

3960108991_59cca75686.jpg
Build_07

I decided to go with the Swiftech APOGEE XT for my CPU block. I didn’t like the shiny chrome look of the mounting brackets so I spray painted them black to better match the rest of the components.

5270804036_1fd47a083f_z.jpg

Just to get an idea of what it looks like, I threw in the 12GB of Dominator RAM along with the Corsair RAM Cooler.

3960112279_55df1b907d.jpg
Build_09

3960885004_00aac519ac.jpg
Build_10

Now on the the rest of the liquid cooling loops.
Edited by Mr_Armageddon - 4/3/12 at 12:22pm
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #2 of 27
Thread Starter 
I have dyed all the fan cables/extensions along with the other PSU connections that were not already black.
Here you can see the tape job covering all the connectors, in preparation for the vinyl dye. The pump is also wrapped up there on the right.
3973735200_3828c2f2ae.jpg
Click to View Larger Image

Here are all the fan extensions that plug into the fan controller, dyed jet black.
3972970049_2910bb3d0b.jpg
Click to View Larger Image

These are the Swiftech MCP350 pumps that I will be using for the two loops. At first I mounted them in the bottom of the hard drive cage. Later on I installed them in the XPCS Dual Bay Res. Pictures of that to follow.
5269889074_039cb8bcec.jpg

Here is what the CPU/Chipset loop will look like. I haven't mounted the top radiator yet, but you get the idea. You can see the two pumps sitting side by side behind the fan controller. Next bay up is the card reader. The two Reservoirs, and the Optical Drive.
3973736354_ba6de192dc.jpg
Click to View Larger Image

Here is a pic of the front with all the bays installed.
3972969653_4522c07e2d.jpg
Click to View Larger Image

Side shot with one loop partially installed, and all the PCIe / PCI slots filled with what I have. (1) Creative X-Fi Titanuim Fatal1ty Edition, (2) EVGA 8800 Ultra, (3) EVGA 9800GT (PhysX), (4) Wireless N Card.
3973780506_053a9b47dc_o.jpg

*Side Note.... that sag you see in the seperator between the PSU chamber and Motherboard area has been fixed buy using a wodden dowl, spray-painted black. It will be visible in future pictures.
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #3 of 27
Thread Starter 
Originally I had planned to have my Optical Drive in the top bay of the case. But I ran into the issue with the barb from the radiator sticking out into the top 5.25in bay. I thought I had planed so meticulously, and this kind of mistake really pissed me off. Luckily, the fix wasn't too bad, and ended up only being a minor delay. I was able to move the card reader from the 4th bay down, up to the top bay, and put the optical drive in its place. Problem solved.
Here you can see where the barb was in the way and how far it made the optical drive stick out. No bueno.
3977128950_1c4933243e.jpg
Click to View Larger Image

Here is the fix by switching the card reader with the optical drive.
3976361891_48b3afee78.jpg
Click to View Larger Image

Here is a shot of the tubing I used for this build. PrimoFlex Pro LRT UV Tubing -3/8in. ID
3977123610_e59e677288.jpg

Here is the guy that was giving me all the problems. The X-Flow design means that there is one port on each side of the radiator. That way you don't have to run tubing across the PC case. I though it would make for an easier install, but that proved not to be true because of the barb issue.
The fans are Cooler Master R4 120mm Blue LED Fan R4-L2R-20AC-GP. They push a lot of air, but can be a bit loud when maxed out. With the fan controller I have them at about 1,000RPM, and they are whisper quiet and still move plenty of air through the radiator. They do have blue LEDs but they are not very bright and give a soft blue glow to the inside of the case. I used 6-32 x 3/8" Socket Cap Head Screws to secure the fans to the radiator, and the radiator to the case.
3976361077_66ec648aec.jpg
Click to View Larger Image

These are the fan extensions cables that plug into the Scynth Kaze Server Fan Controller. I used vinyl dye to get them jet black. You can see them plugged in along with some of the temperature monitor cables.
3977129982_19120d30df.jpg
Click to View Larger Image

For my liquid I went with Feser One non-conductive fluid. UV blue and UV green to match the colors of the tubing.
5270807466_9475c3bbc6.jpg

I ending up not using these Reservoirs, and will include pictures of the new one in a future post. For now, check out the Feser One liquids lookin' pretty with LED backlighting.
3976362271_c517aefc0f_z.jpg
Click to View Larger Image

I welcome community feedback, so let me know what you think so far. Thanks for looking.
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #4 of 27
Thread Starter 
Ok. So while I am waiting for my i7-970 to arrive I will go ahead and install my EVGA GTX580 Hydro Coppers, and put together my loops. The Hydro Coppers are really nice looking cards, and the waterblock, custom made by Swiftech, look like a much better design that the 480 model. I am glad that the block covers the full PCB. Very good looking card.
5270196111_5d994d60c7_z.jpgClick to View Larger Image

It comes with the 580 backplate which just adds to the awesome look of this card.
5270804624_29fa88f917_z.jpg
Click to View Larger Image

Here is a shot of the Bitspower fittings I will be using with the Hydro Coppers. Went with the matte black compression fittings.
5270805190_f98857030a_z.jpg
Click to View Larger Image

Ok here we have the 3 GPUs installed. I don't have my i7-970 yet so until then I will be running with my i7-920, which is currently installed beneath the Swiftech Apogee XT in the picture below. I really like the look that these cards bring to the build.
5270197469_bb390a9968_z.jpg
Click to View Larger Image

And here is a shot with all the tubing and my Koolance QDC (Quick Disconnects) installed. I don't have any fluid in the loops yet as I broke an o-ring on one of my QDCs. Gonna have to run to the hardware store tomorrow to get it replaced. The QDCs make draining and cleaning the loops really easy, and i like the way they look all bunched together like this. Reminds me of the bullet chambers on a revolver pistol.
5270806570_84cccddd2c_z.jpgClick to View Larger Image

Ok, now for some pics of various components that I have also just installed. Here we have my Intel X-25m 160GB SSD. Using it for my OS and Program drive. This little guy has provided the most noticeable difference in overall use/speed compared to any other hardware upgrade I have had over the past year or so. Everything is so snappy with this guy installed.
5272330727_3389a6c942_z.jpg

Here is the EVGA USB 3.0 PCIe card. Works great with my Seagate GoFlex drives that support USB 3. It would be nice to have a USB 3.0 on the front of my case, but as I don't use it that often, I am happy with this simple upgrade.
4977717484_53297fa933_z.jpg

These are the little heat sinks I purchased to place on some of the hot spots on the MoBo. Not a necessity by any means, but they look good.
4977717042_ca1a295fca.jpg

Placement of the heat sinks near the RAM slots
4977107075_c0078a1e03_z.jpg

Placement of the heats sinks near the CPU socket
4977107641_fb87e826bf_z.jpg

Here is the bottom of the XSPC Acrylic Dual 5.25in. Reservoir. I was going to use one XSPC Single Bay Res for each loop, but in the end I decided to go with the Dual Bay one instead. In addition to keeping things more simple by combining everything into one unit, it also reduced the noise of the pumps to almost nothing.
4977718566_4daf989a28_z.jpg

I did have to do a bit of modding to get this to fit into the 800D, but it was very simple. Just used a rotary tool to make the slots on the side of the res a bit deeper. Now the rails/fins inside the 5.25" bay slide in just fine.
4977106587_de20e025c7_z.jpg

I ended up going with a new Scythe Kaze Master Pro 5.25" Fan Controller because my previous one (Scythe Kaze Server) kept dying on me. I think I was over loading the 4 channels, because it would often be very hot to the touch. This new one has six channels, so I don't have to double up any fans. Each rad fan has its own channel, and the extra one is used for the RAM fan which can be loud at full speed. Very happy with this fan controller thus far.
4977718020_9f87c9ac84_z.jpg

Here is one of the four (4) Koolance QDCs (Quick Disconnects) I am now using in my loops. Two (2) on each loop makes for very easy draining, cleaning/flushing, and refilling. I think they look pretty good as well. These particular ones (Male fitting, Female fitting) are Hi-flow, and I haven't noticed any rise in temps, so they seem to be doing their job.
4977106439_b54da4d6bf.jpg

Case Shots! This is the front of the case with the XSPC Dual Reservoir installed. Really like the look of the split bays. The pumps are nice and quiet while installed in the Res as well. Before the when the pumps were just sitting inside the case, they were the only audible part of my system. But now, even they are near silent.
4906963070_ff14c38c80_z.jpg
Click to View Larger Image

Here is a shot of where I placed the cathode tube on the side panel. You can't see them when the panel is on, and they do a good job of making the tubing glow.
4296060593_6e561c0448_z.jpg

Here it is, in all it's glory. The guts of Turambar. Here is the order of the items I have in the PCI slots:

* Creative X-Fi Titanium Fatal1ty Edition
* EVGA GTX580 Hydro Copper 2
* EVGA 9800GT (dedicated PhysX card)
* D-Link Wireless N Card
* EVGA GTX580 Hydro Copper 2
* EVGA USB 3.0 Card
5272339303_2a4e8689be_z.jpg
Click to View Larger Image

With side panel on, and UV cathodes active.
5272945986_4eb3f89d28_z.jpg
Click to View Larger Image

Cathodes off, natural light/camera flash showing off the tubing color. I really like the color combo going here. I would have also have been happy with all blue tubing, but I decided that since I have two separate loops, I would make the different colors.
5272336747_e005215b8f_z.jpg
Click to View Larger Image

Here is a shot of the build located in my home office / man cave. As an attempt to keep things from getting too cluttered, I located the case to the far left of my workspace and am using 15ft DVI cables and USB extensions to hook up my LCD monitors, keyboard, mouse, etc.
5272332823_e597a4ff0c_b.jpg

The system is near silent, and was really fun to build. I will be putting it through the ropes in a few days, and will post all my final temps and benchmarks as soon as I am done. Big thanks to my wife for letting me buy all this stuff, and to my kiddos for "helping Daddy" with this build. Thanks for looking.

.
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #5 of 27
Thread Starter 
I plan on using this post for Temperatures and Benchmark scores as I have a chance to run them.

Ok, temps are great at the stock clock settings for the Hydro Coopper 2 (GPU @ 850Mhz). I was freaking out at first because both my 580s were at 75°C and climbing while just idling on the desktop. Gave my rig a "jiggle" and must have released an air bubble because the temps instantly dropped down to the low 30s. After that ordeal I ran a few quick benchmarks to test temps.

Heaven DX11 Demo/Benchmark @ 850MHz - 60min Loop
API: DirectX 11
Stereo 3D: disabled
Shaders: high
Tessellation: extreme
Anisotropy: 16
Anti-aliasing: 8
Full screen: Yes
Resolution: 1920x1200
During this 60min loop my Hydro Coppers never hit over 52°C.

Crysis Warhead Bbenchmark (by FRMEBUFFER) tool @ 850MHz - 30 Loops
Mode: ENTHUSIAST
64-bit: Yes
Display Resolution: 1920 x 1200
FSAA: AA 16x
Loops: 30
Map: ambush
Time of day: 9
During this 60min loop my Hydro Coppers never hit over 49°C.

Temps are doing great. I will work on overclocking these cards this week and will report back with actual benchmark scores and additional temp info at that time.

I was wondering if it would be worth running my 9800GT as a dedicted PhysX card with the 580s in SLI. Ran two benchmarks to test it.

CryoStasis PhysX Benchmark Tool
GTX 580 in SLI + 9800GT Dedicated to PhysX
Settings Maxed
Average FPS: 109.6

GTX 580 # 2 running PhysX while in SLI Mode
Settings Maxed
Average FPS: 97.2

Batman Arkham Asylum in-game Benchmark
GTX 580 in SLI + 9800GT Dedicated to PhysX
Settings Maxed
Average FPS: 79

GTX 580 # 2 running PhysX while in SLI Mode
Settings Maxed
Average FPS: 73

With both of these PhysX tests, I still gained a few FPS when using my 9800GT as a dedicated PhysX GPU. Glad to see those results, it will stay in my build. More benchmarks and temps to come over the course of the week.
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #6 of 27
Congratulations. That is beautiful. Nice job
    
CPUMotherboardGraphicsRAM
i7 920 D0 @ 3.8 | 1.20v | HT ON Asus Rampage II Extreme Evga 760 Corsair XMS3 - 1666 
Hard DriveCoolingOSMonitor
WD Caviar Green 1TB Megahalems Windows 7 Samsung SyncMaster 2333 
KeyboardPowerCaseMouse
Filco Minila MX Reds OCZ ZX Series 850W Thermaltake Speedo Advance Deathadder 
Mouse PadAudio
Razer Goliathus Steelseries Siberia v2 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 920 D0 @ 3.8 | 1.20v | HT ON Asus Rampage II Extreme Evga 760 Corsair XMS3 - 1666 
Hard DriveCoolingOSMonitor
WD Caviar Green 1TB Megahalems Windows 7 Samsung SyncMaster 2333 
KeyboardPowerCaseMouse
Filco Minila MX Reds OCZ ZX Series 850W Thermaltake Speedo Advance Deathadder 
Mouse PadAudio
Razer Goliathus Steelseries Siberia v2 
  hide details  
Reply
post #7 of 27
Looks amazing! I'm still deciding between Hydro Copper 2 for the convenience and looks, or EK. Your temperatures are solid though, and I've seen some near gigahertz stable benchmarks on this card.

Update your findings on this card over at the thread I started on [H]ardForum too. biggrin.gif

http://hardforum.com/showthread.php?t=1568177

Miscellaneous questions:

Do you think your two loops are worth it over 1 loop for extreme overclocking? Based on this thread.

Coolant dyes giving you clogging problems?
post #8 of 27
that is my favorite liquid cooled PC EEVVVARRRRRR!!!!!!!!!! eek.gif


v8Y1VvbEma2efk3vWvg3NmQm_400.gif
Ov3RK11L
(15 items)
 
Project Toaster
(15 items)
 
 
CPUMotherboardGraphicsRAM
i5-661 4.2Ghz 24/7 Gigabyte H55N-USB3 Sapphire HD7950 950mhz OC Gskill Ripjaws DDR3 1333 4GB 
Hard DriveOptical DriveCoolingOS
Corsair F60 SSD + WD 500GB black LG burner Antech Kuhler 620 w/ NoiseBlocker fan Win 7 Ult. 64bit 
MonitorKeyboardPowerCase
Asus 24" LED LCD 1920X1080 Logitech G510 600W 80+ Lian Li PC-Q08B 
MouseMouse PadAudio
R.A.T 7  Frys?? lol onboard..ohh yahhhhhhh  
  hide details  
Reply
Ov3RK11L
(15 items)
 
Project Toaster
(15 items)
 
 
CPUMotherboardGraphicsRAM
i5-661 4.2Ghz 24/7 Gigabyte H55N-USB3 Sapphire HD7950 950mhz OC Gskill Ripjaws DDR3 1333 4GB 
Hard DriveOptical DriveCoolingOS
Corsair F60 SSD + WD 500GB black LG burner Antech Kuhler 620 w/ NoiseBlocker fan Win 7 Ult. 64bit 
MonitorKeyboardPowerCase
Asus 24" LED LCD 1920X1080 Logitech G510 600W 80+ Lian Li PC-Q08B 
MouseMouse PadAudio
R.A.T 7  Frys?? lol onboard..ohh yahhhhhhh  
  hide details  
Reply
post #9 of 27
Thread Starter 
Quote:
Originally Posted by velocd;11740071 
Looks amazing! I'm still deciding between Hydro Copper 2 for the convenience and looks, or EK. Your temperatures are solid though, and I've seen some near gigahertz stable benchmarks on this card.

Update your findings on this card over at the thread I started on [H]ardForum too. biggrin.gif

http://hardforum.com/showthread.php?t=1568177

Miscellaneous questions:

Do you think your two loops are worth it over 1 loop for extreme overclocking? Based on this thread.

Coolant dyes giving you clogging problems?

I have already posted on that exact same thread biggrin.gif (user name is also Mr_Armageddon on [H]ardForum), but I will update it with more info as I run more tests.

Dual loops may not give you any real performance advantage, but it doesn't hurt either. Plus I wanted different colors for each loop, so for me dual was the way to go.

Originally I was using PCIce from PrimoChill. Started to get a bit of build up so I switched to Feser One. Have been using it for about 8 months now and no problems to report thus far.
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 6700K ASUS MAXIMUS VIII FORMULA EVGA GeForce GTX 1080 SC Corsair Dominator Platium w/ Light Bars 
Hard DriveHard DriveHard DriveHard Drive
Samsung Pro 950 M.2 SSD (OS & Programs) Samsung EVO 850 SSD (Games) Western Digital WD20EADS (User Files) Hitachi HDS723030 (Storage) 
CoolingOSMonitorMonitor
Liquid Hardline Loop w/ 480 Radiator Windows 10 x64 Pro Dell 3011U (Mid) Dell 2007FP (Right) 
MonitorKeyboardPowerCase
Dell 2007FP (Left) Corsair K70 RGB Corsair AX1200 Thermaltake Core P5 
MouseMouse Pad
Logitech G502 Dechanic XXL 
  hide details  
Reply
post #10 of 27
Sweet, looks a bit like mine!
dsc01950j.jpg
nWE3Dia.....
(13 items)
 
  
CPUMotherboardGraphicsRAM
980x @4.5 1.4V 3003B331 P6T7 Supercomputer SLI GTX480 Ocz 2000mhz 
Hard DriveOptical DriveOSMonitor
Intel 80Gb SSD Raid0+Spinpoint F1 Raid0 Samsung 7 Ultimate 64bit 3x Acer GD245HQbid 120Hz+3D Vision 
KeyboardPowerCaseMouse
G19 Silverstone Strider 1500 Obsidian 800d Logitech G500 
Mouse Pad
Razer Sphex 
  hide details  
Reply
nWE3Dia.....
(13 items)
 
  
CPUMotherboardGraphicsRAM
980x @4.5 1.4V 3003B331 P6T7 Supercomputer SLI GTX480 Ocz 2000mhz 
Hard DriveOptical DriveOSMonitor
Intel 80Gb SSD Raid0+Spinpoint F1 Raid0 Samsung 7 Ultimate 64bit 3x Acer GD245HQbid 120Hz+3D Vision 
KeyboardPowerCaseMouse
G19 Silverstone Strider 1500 Obsidian 800d Logitech G500 
Mouse Pad
Razer Sphex 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › Project Turambar: Corsair Obsidian 800D, Liquid Cooled, i7-970, GTX 580 SLI (Update 02.28.2012)