Overclock.net › Forums › Graphics Cards › AMD/ATI › Crysis/Warhead Metro 2033 Eyefinity Bench on CF 5870?
New Posts  All Forums:Forum Nav:

Crysis/Warhead Metro 2033 Eyefinity Bench on CF 5870?

post #1 of 5
Thread Starter 
I'm wondering if anyone has played these games with a 3 monitor (1920 x 1080) setup and at what settings on CF 5870s. I don't want to compromise detail settings but don't mind sacrificing AA or AF.
post #2 of 5
My experience with them is only with a single 5870 on such resolution...
With a single 5870 they are unplayable with maxed settings with 3x1080p monitors.. as for a CF setup, I would say you might be good to go (they'll be playable) but without AA, that's for sure...

Both games feel right with lower FPS, but still not comparable to a constant 60fps... but that's up to you. 60 fps is only an option if you sacrifice some detail...
post #3 of 5
I've played both of those games at 5040x1050 (3 x 1680x1050 monitors) with CF 5870's and both are unplayable at maximum settings with no AA or AF. I think they are hitting the limits of the amount of memory on the cards. Crysis stutters really bad and Metro 2033 just has low FPS.
post #4 of 5
Then aim for high settings instead of very high/ enthusiast

I would preffer playing them on medium with 3 monitors than on very high with a single monitor
post #5 of 5
Hmm I play on Metro 2033 on my eyefinity setup, resolutions 4800x900 never going below 40fps on max settings. On Crysis I get better fps than on Crysis warhead for some odd reason. But average fps on Crysis settings maxed out are right around 35-40fps. I do have my cards and my CPU cranked up quite a bit.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Crysis/Warhead Metro 2033 Eyefinity Bench on CF 5870?