post #1 of 1
Thread Starter 
EDIT: Got it working! changed my USB stick filesystem to FAT instead of FAT32

Hey OCN, i'm having some DOS issues.

I'm trying to get a USB mass storage device (2.0 spec) working in MS-DOS 6.0

So far i've gotten to this point
1: transfered USBASPI.SYS over to the DOS directory (C:\\DOS\\USBASPI.SYS) and got it functioning correctly (no errors), the switches /v /w were added for verbose mode and a wait so i can attach the device

Now, USBASPI.SYS does not map drives, only assigns them to ASPI. Therefore step #2

2: Transfered DI1000DD.SYS to the DOS directory (C:\\DOS\\DI1000DD.SYS) and added the switch /dE to set the drive E to be the default mapped device.

However, at this point i get an error.

Here's what it looks like
"Available ID = 0
ID 0 = HD .. SanDisk Cruzer
#1 : ??? Read error in partition read.
Read error in boot record read.
#2 : ??? Read error in partition read.
Read error in boot record read.
#3 : ??? Read error in partition read.
Read error in boot record read.
#4 : ??? Read error in partition read.
Read error in boot record read."

I'm not sure where to go from here.

Thanks for any help!
-mHo2
Edited by mho2 - 12/24/10 at 10:57pm