Overclock.net › Forums › AMD › AMD CPUs › Overclocking 1055T
New Posts  All Forums:Forum Nav:

Overclocking 1055T

post #1 of 34
Thread Starter 
Hello everyone, my first post here!

So, I've just got my new 1055T with M4A79XTD EVO mobo, so will I be able to oc around 3.4 ghz without any vcore increase? What are all the options I should disable in the bios? What should I set HT-link at etc.

IntelBurn Test showed 38c after 5 runs and Prime95 around 34c after hour or so. Pics of HV monitors etc. Im not sure should I trust the core temp, do I need to add 10c to them?
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #2 of 34
Lower your RAM speed and raise the bus speed 5 MHz at a time testing for stability and see how far she goes on default voltage basically. Of course, if you have high speed RAM it may not be necessary to lower it. If you're only going for 3.4 GHz you can probably lower your vcore and save some electricity. That chip should go a lot higher on default..
Gaming Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8120 ASUS M5A99X EVO (Beta BIOS 0810) Powercolor HD6970 (2 gig) Factory OC'd to 940 MHz Mushkin DDR3 1600 1.35v (2X4) 
Hard DriveOptical DriveOSMonitor
Crucial RealSSD C300 (RAID 0 64 gig x2) Lite-On SATA Windows 7 Pro X64 ASUS MS226 22" 
KeyboardPowerCaseMouse
Logitech Cooler Master Real Power Pro 850 Watts Cooler Master Storm Enforcer Red LED's Logitech MX 518 
Mouse Pad
Allsop 
  hide details  
Reply
Gaming Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8120 ASUS M5A99X EVO (Beta BIOS 0810) Powercolor HD6970 (2 gig) Factory OC'd to 940 MHz Mushkin DDR3 1600 1.35v (2X4) 
Hard DriveOptical DriveOSMonitor
Crucial RealSSD C300 (RAID 0 64 gig x2) Lite-On SATA Windows 7 Pro X64 ASUS MS226 22" 
KeyboardPowerCaseMouse
Logitech Cooler Master Real Power Pro 850 Watts Cooler Master Storm Enforcer Red LED's Logitech MX 518 
Mouse Pad
Allsop 
  hide details  
Reply
post #3 of 34
Thread Starter 
I guess I should turn off turbo core and test for stability with IntelBurn test or something?

What about cool and quiet?
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #4 of 34
Disable CE1, C&Q and turbo.
Edited by dixson01974 - 12/25/10 at 3:44pm
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #5 of 34
Thread Starter 
Alright, I got it at 3430 mhz now and HT-link and NB are at 2205 mhz. Memory is at 1306 from the stock 1333 mhz.

At idle the socket is at 34c and after running IntelBurn Test 2 times at high and peak teamp was 54c and average at 50c. Prime95 after an hour was 46c - 50c. Are the temps fine?
Edited by Devilmaypoop - 12/26/10 at 4:48am
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #6 of 34
Ok. Here the breakdown on that you need to know for ocing any athlon II and phenom II cpu on air.
1) Max cpu voltage is 1.55v.
2) Keep temp under 55c.
3) NB frequency take it as high as you can take it and stable.
4) CPU/NB voltage max 1.45v. This the voltage for NB Frequency.
5) Keep HT around 2000.
6) Keep memory close or under to stock speed.

What cpu cooler do you have?
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #7 of 34
Thread Starter 
I have the stock cooler. IntelBurn Test just stopped midway and had a warning that my system may be unstable. Should I reduce HT-link speed or drop back the oc?
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #8 of 34
Reduce the HT and keep around 2000 and if it fail back off the oc a little.
Just fellow the 6 rules and you be fine.

EDIT
If you want to oc higher you need a better cpu cooler.
Edited by dixson01974 - 12/26/10 at 5:05am
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
post #9 of 34
Thread Starter 
I know, I'll be getting that later but for now I just want it stable at this frequency.

I set the HT-link to 1960 mhz and NB to 2450 mhz.
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
..
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T@3445MHZ 1.2V/ SB Pentium G620@0.84v ASUS M4A79XTD EVO/ ASUS P8P67 Sapphire 6870/ Club 3D 5770 2x2gb Kingston DDR3 1333mhz @ 1467mhz 7-7-7-17 
Hard DriveOSPower
Samsung Spinpoint F3 1TB Windows 7 Home 64bit Corsair 600W 
  hide details  
Reply
post #10 of 34
Quote:
Originally Posted by Devilmaypoop View Post
I know, I'll be getting that later but for now I just want it stable at this frequency.

I set the HT-link to 1960 mhz and NB to 2450 mhz.
Ok. Now you need to test it.
Hey. When you get a chance please fill out your system info in your control panel. This way we can help your better.
Edited by dixson01974 - 12/26/10 at 5:15am
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
HTPC
(11 items)
 
  
CPUMotherboardRAMHard Drive
AMD A-3870K AsRock A75 Pro (FM1) HyperX DDR3 1866 8 GB SAMSUNG 830 256gb 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 2TB Plextor Black Blu-ray Burner Phenom II X4 stock Cooler Windows 10 
MonitorPowerCase
LG M2762D-PM Glossy Black 27" 5ms (1920x1080) Antec HG 900 Gerenic ATX Case 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › Overclocking 1055T