Overclock.net › Forums › AMD › AMD - General › ASUS M4A89GTD PRO/USB3 Not posting Usb has no power
New Posts  All Forums:Forum Nav:

ASUS M4A89GTD PRO/USB3 Not posting Usb has no power - Page 2

post #11 of 22
Are ripjaws on the compatibility list? if not start there. I had no post with two separate sets of ram that were not on the list
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1055t @4.0 ASUS M4A89GTD PRO EVGA GTX470 Patrtiot G-series 4G (2x2G) 
MonitorPowerCase
Aoc 23" 1920x1080 Antec TPQ 850W Cooler Master 830 Stacker(Nvidia Edition) 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 1055t @4.0 ASUS M4A89GTD PRO EVGA GTX470 Patrtiot G-series 4G (2x2G) 
MonitorPowerCase
Aoc 23" 1920x1080 Antec TPQ 850W Cooler Master 830 Stacker(Nvidia Edition) 
  hide details  
Reply
post #12 of 22
clr cmos jumper is between the sata 1 and usb 7-8 ports

it has mem ok, hit the button, see if a led turns off then green again
Edited by ffejrxx - 12/29/10 at 11:37pm
post #13 of 22
is there a setting in the bios that directs video to onboard GPU? ressetting to defaults should sort that out.
post #14 of 22
Thread Starter 
i tried that too..
post #15 of 22
Thread Starter 
i have removed the ram to try to get beeps out of the mobo speaker but it doesn't beep. i have checked my PSU and it is good. i just checked the CPU and it has a bent pin.... I hope that is all that is wrong.....
post #16 of 22
Thread Starter 
Quote:
Originally Posted by dihartnell;11826306 
is there a setting in the bios that directs video to onboard GPU? ressetting to defaults should sort that out.

i cant get into bios...
post #17 of 22
Thread Starter 
should i return it or try to fix the bent pin, it came with a bent pin lol but i forgot to check it -_-
post #18 of 22
Thread Starter 
Quote:
Originally Posted by ocaddikt;11826274 
Are ripjaws on the compatibility list? if not start there. I had no post with two separate sets of ram that were not on the list

they are i checked before buying
post #19 of 22
Thread Starter 
fixed, it finaly beeped biggrin.gif, going to install back into case today, my dad says my noctua nh-d14 bent the pin when installing.... i think it was shipped like that.
post #20 of 22
I dont see how the CPU cooler could bend the pin if the CPU was already installed but as its all sorted now you can get down to the fun of overclocking.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › ASUS M4A89GTD PRO/USB3 Not posting Usb has no power