Overclock.net › Forums › Cooling › Water Cooling › New Project- Not sure is if will work though...
New Posts  All Forums:Forum Nav:

New Project- Not sure is if will work though... - Page 3

post #21 of 22
Thread Starter 
Don't worry, I already have the dust filters I'll probably order the components around March because this stuff is anything but cheap!
post #22 of 22
Thread Starter 
Here is a list of the parts (All from Koolance):
CPU-350AT (CPU), Acetal [no nozzles]
(Few of these)Nozzle Pair, Compression [For ID: 10mm (3/8"), OD: 13mm (1/2")]
Radiator, 2x120mm 30-FPI Copper [no nozzles]
Liquid Coolant Bottle, Low-Conductivity, 700mL (Colorless)
Pump, PMP-450S [13mm, 1/2" ID]
Pump Nozzle & Reservoir Base for PMP-450/S (60mm OD)
Reservoir Body, 60x80mm (WxL), 157ml
Tubing, Orange UV-Reactive PVC, 1ft/30.5cm [ID: 10mm (3/8"); OD: 13mm (1/2")]
Tubing Spring Wrap, Black [For OD: 13mm (1/2")]

I'm open to any advice
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › New Project- Not sure is if will work though...