Overclock.net › Forums › Cooling › Water Cooling › Gigabyte ga-890fxa-ud5 crossfİre watercoolİng
New Posts  All Forums:Forum Nav:

Gigabyte ga-890fxa-ud5 crossfİre watercoolİng - Page 2

post #11 of 20
These SLI connectors are adjustable a bit by about 12mm, so what you see is the adjustable section, mainly because the blocks are not 100% the 1 or 2 slot distance between the blocks' connections.

Seems fine.
Did you make sure its connected well and not leeking?
Main system
(16 items)
 
Editing PC
(8 items)
 
 
CPUGraphicsGraphicsRAM
E5-1680v2 AMD FirePro D700 AMD FirePro D700 64GB 1866mhz 
Hard DriveOSMonitorCase
1TB PCIE SSD OSX 10.10.x Dell U2713H Mac Pro 
  hide details  
Reply
Main system
(16 items)
 
Editing PC
(8 items)
 
 
CPUGraphicsGraphicsRAM
E5-1680v2 AMD FirePro D700 AMD FirePro D700 64GB 1866mhz 
Hard DriveOSMonitorCase
1TB PCIE SSD OSX 10.10.x Dell U2713H Mac Pro 
  hide details  
Reply
post #12 of 20
Thread Starter 
Thanks a lot ... a lot
I do not understand the point I tried the following .. 1 slot and 2 slot connector, and both full insert did not fit the picture that did not stop .. .. 1slotluk konnnektörü had some space together,


but this is not a problem and emerge from the cards, such as light touch will not understand how to keep the liquid from this section .. .. .. wonder if that did not have much confidence but I do not think I thought I put is wrong .. I think no other in the shape of a Formal.

2-slot connector insert portion of the case showed this picture occupy my mind



is this normal?

They also say it like this .. so its ok to be adjusted or left part? because i am not sure its ok 100%


Lightly touch the connectors on the cards looks like this ..

    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
post #13 of 20
I'd just use the 2 slot connector, and then test it for leaks. It looks fine to me.
Labor of Love
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 5.0 GHz/1.42v ASUS P8P67 Pro MSI GTX 670 OC 20 GB/1600/7-7-7-24 
Hard DriveHard DriveOptical DriveOS
120GB Vertex SSD Western Digital 1TB None! Ubuntu 12.04/Win8/OSX 10.8.2 
MonitorKeyboardPowerCase
27" 1440p X-Star OCN Mechanical - MX Browns Seasonic X-560 800D w/RX480 top mounted 
Mouse
Logitech USB Generic 
  hide details  
Reply
Labor of Love
(14 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 5.0 GHz/1.42v ASUS P8P67 Pro MSI GTX 670 OC 20 GB/1600/7-7-7-24 
Hard DriveHard DriveOptical DriveOS
120GB Vertex SSD Western Digital 1TB None! Ubuntu 12.04/Win8/OSX 10.8.2 
MonitorKeyboardPowerCase
27" 1440p X-Star OCN Mechanical - MX Browns Seasonic X-560 800D w/RX480 top mounted 
Mouse
Logitech USB Generic 
  hide details  
Reply
post #14 of 20
Thread Starter 
Do you have a share in this picture that you've got to like? this picture is it normal? in the picture I have seen the difference as well .. but normally shifted to one side as an equal share on both sides will be more accurate to leave ..

i tryed 2 different boards but all the same..all seems same..

Do you see a problem with this picture? can not be sure


    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
post #15 of 20
Your're not using the full 16/16 pci-e when connecting to 1 and 3 slot.
I'd use the 1 slot connector and use 1 and 2 slots to take advantage of the full 16x pci-e speeds
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
post #16 of 20
Thread Starter 
but my board can do with 3 card crossfire..trifire i mean..but i cant use last pcı-e slot when i use 3 card on crossfire..anyway what can you tell me about pictures?is it right or?
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
post #17 of 20
Looks fine. Just check on your board manual if you get full 16/16 speed by using 1st and 3rd slots

This is what I found in your board specifications:

(Note 3) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
(Note 4) The PCIEX8 slot shares bandwidth with the PCIEX16_1 slot. When PCIEX8 is populated with a PCI Express graphics card, the PCIEX16_1 slot will operate at up to x8 mode.

Edited by PeL4 - 2/1/11 at 8:53am
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
post #18 of 20
Thread Starter 
ty bro,,

so its ok ..

i want to use 1 slot connector and no need pcı-e 8x slot atm..

last thing,

this 1 slot connector seems ok right?no problem there..

and the resulting red arrow pointing to the emergence of a normal part .. I've called this part of the picture clearly seen right side .. so you have spared no trouble from both sides equally balance did not?
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
post #19 of 20
If you're going to use slots 1 and 2, use the 1 slot connector.-
If you're using 1 and 3, use the 2 slot connector. That part pointed with the arrow seems normal, is the adjustable section like mentioned before.
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
My PC
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k @ 4.6ghz Asus P8Z68-M PRO EVGA GTX 580 G. Skill Sniper 2x4GB 1866Mhz 8-8-8-24 
Hard DriveOptical DriveCoolingOS
2 x Crucial M4 64gb sata3 RAID 0 + ST500gb + WD... Asus DVDRW sata Corsair H80 Win7 x64 Professional -genuine- 
MonitorKeyboardPowerCase
Dell 2408wfp Rev. A02 Razer Lycosa CoolerMaster Silent Pro M 700 Lian Li PC-V600F 
MouseMouse Pad
Microsoft Sidewinder X8 Razer 
  hide details  
Reply
post #20 of 20
Thread Starter 
ok ty so much bro+1 its ok...
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Amd phenom x4 965 c3 4ghz(260x15.5)1.520v GA-890FXA-UD5 Asus-Sapphire HD6870 Crossfire(1000x1120-1.237v) 2x2 Gb Kingston hyperx DDR3 1333@1732 
Hard DriveOSMonitorPower
2xSamsung 7200 500 F3 raid 0 Win7 Ultimate x64 Samsung 2370 Corsair 650TX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Gigabyte ga-890fxa-ud5 crossfİre watercoolİng