Overclock.net › Forums › Intel › Intel CPUs › [Maybe] SOLVED: Previous Stable OC won't boot
New Posts  All Forums:Forum Nav:

[Maybe] SOLVED: Previous Stable OC won't boot - Page 2

post #11 of 13
Thread Starter 
Thanks for trying, but I enabled AHCI before installation and the problem is the same with AHCI enabled or disable
post #12 of 13
@Cravin

This subject is ironic.

Today I was browsing guru3d forums and came across This thread here.

Checked out the tweaks. Specially Disabling HPET Found here.

Using DPC latency checker stated in above link, my system had lower latency by disabling HPET.

Funny thing is, I am completely stable at 4.1GHz 24/7 w/HPET 64bit enabled, so I went and disabled HPET, gamed for 2 minutes on BO, I got BSOD.

At the time I configured my stable overclock, I had HPET 64bit enabled.

So now that I found my system gets lower latency by disabling HPET, I am gonna start from scratch, overclocking to my maximum with HPET disabled.

Do surely check out that DPC latency program.
post #13 of 13
Thread Starter 
I'll give it a try
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › [Maybe] SOLVED: Previous Stable OC won't boot